User Manual 1. Product model: ZYLED-WR01-A (A = 6-24 lamps) 2. Electrical description: input voltage 100-130VAC 50/60Hz 0.28A Output power: 15W Max Function Overview: 1. Built-in RF433 wireless receiver can realize external RF433 remote control operation 2. Built-in 2.4g WIFI wireless transceiver can realize wireless remote control operation with mobile APP through router 3. Built-in manual function button to achieve manual control operation Ⅰ.
Function Description: 1, 8 static modes:White,red,orange,green,cyan,blue,purple,pink. 2, 5 thematic modes: Red,white;Red,white;Red,white;...(Representing Victory Day); White,red,purple,pink;White,red,purple,pink;...(Representing Easter); Orange,purple;Orange,purple;Orange,purple;...(Representing Halloween); Red,green;Red,green;Red,green;...(Representing Christmas);； White,red,orange,green,cyan,blue,purple,pink;White,red,orange,green,cyan,blue,pu rple,pink;...
be cycled through in a selected monochrome or theme mode. 4, Brightness adjustment: stepless adjustment;dynamic and static both support brightness adjustment. 5, Timing function:3H,6H,9H.3 kinds of timing options,automatically turn off when the timing is up;clear the timing when the switch state changes.
11 Victory Day breathe 12 Victory Day chase 13-16 Easter Once for each of the four modes 17-20 Halloween Once for each of the four modes 21-24 Christmas Once for each of the four modes 25-28 eight Colors Once for each of the four modes 29 Go back to the red above and cycle through. Press and hold button1: 3~4 seconds switching controller switch. Press and hold button 2: 4~5 seconds to enter the WiFi distribution network.
1. Distribution network: For the first time,the device uses the app,it needs to be paired with the phone and the device.And before pairing,the device is made to enter the distribution network mode.The following is the way to enter the distribution network mode: Press and hold the keys on the device for more than 5 seconds,the device enters the flash mode.The flash mode light for 0.5 seconds to flip once,the device enter into network mode.
2,Click "Lighting" on the left, and then select "Lighting (WIFI)",as shown in the figure:
3,Connect your phone to an Internet-ready WiFi and enter your password into it,click Next.
4,Click on the first "Fast flashing (0.5 seconds/1 time)", as shown in the figure.
5,Wait for the pairing to be completed. Till now,the network matching has been completed, the panel operations are described below.
2. Panel operation: 1. Operation in white light mode (yellow frame): a) Red area:white light brightness adjustment,click "daylight" and then adjust the slider to control the white light brightness value. b) Green area: adjust the brightness of the colored light. Click the "current color" and then adjust the slider to control the brightness of the colored light. c) Blue area:select the number of lights to set, there are 6, 10, 12, 15, 18, 20, 24 to choose from.
2. Operation in color light mode (yellow frame): a) Red area: contrast adjustment slider. b)Green area: color adjustment color wheel.
3.Operation in scene mode (yellow frame): a) Red area: theme scene selection (swipe to the right for more) b) Green area: theme scene color, mode, speed settings.
4.Scene settings a) Black area: color addition b) Blue area:select colored light/white light. c) Yellow area: colored HSV/white light brightness adjustment area. d) Green area: mode selection,which are: static, flash, breathe, chase. e) Red area: change speed adjustment.
5.Schedule,left time setting area. a) Red area:schedule. b) Blue area:left time.
Left time in the blue zone:((Maximum countdown of 23 hours and 59 minutes is possible)
6.
IMPORTANT SAFETY INSTRUCTIONS a) READ AND FOLLOW ALL SAFETY INSTRUCTIONS. b) for all year use . for outdoor use. c) Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat. d) Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails. e) Do not let lamps rest on the supply cord or on any wire.
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference. (2)This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
