User Guide

To choose H.264/ H.265 for streaming
To choose the input source
Set your channel name for to recognize the encoder
Rotate the video
To choose the display resolution from 4:3 or 16:9
To choose VBR/ CBR
To change the GOP size
To change the output resolution
To change the output video bitrate
higher level higher bit fluctuation
Alternatives: H.265 main, H.264 high/ main/ baseline profile
To choose your output frame frequency (from 5-60)
To choose VLC/ FFMPEG package
Modify it if signal detected wrongly
To rename PMT ID
To rename transport ID
To rename stream ID
To set up the channel name
To rename SDT name
To rename the HTTP stream name; Enable HTTP streaming
To change the HTTP port
To rename the RTSP stream name; Enable RTSP/ ONVIF streaming
To change the RTSP port
To enable RTSP authentication
Alternatives: Audio/ video/ AV
RTSP over UDP/ TCP
Time To Live
To choose the Unicast address; Enable Unicast streaming
To choose the Multicast address; Enable Multicast streaming
To choose the RTP address; Enable RTP streaming
To change the Unicast port
To change the Multicast port
To change the RTP port
RTMP/S by URL/ IP mode; Enable RTMP streaming
Alternatives: Audio/ video/ AV
RTMP stream address
Save current setting