Installation Guide

© 2017 Halco Lighting Technologies, LLC. All rights reserved. Halco and ProLED are registered trademarks of Halco Lighting Technologies. All sizes and specications are subject to change. 07-19-17.
Halco Lighting Technologies | 2940 Pacic Drive | Norcross, GA 30071 | Toll Free 800.677.3334 | Phone [phone] | Fax [phone] | halcolighting.com | Atlanta | Carlstadt | Chicago | Cleveland | Houston | Phoenix
Dimming
Dimming performance may depend on the dimmer, the dimmer range adjustment setting (for dimmers with brightness range adjustments), the wiring
method, and/or the number of LED modules installed on the dimmer circuit.
* For dimmer selection, Dimming control manufacturers revise their products often; for the latest list of compatible dimmers please visit our website at
www.halcolighting.com.
* For best results, it is recommended to install a minimum of four LED modules onto one dimmer.
* Before turning on the LED lights, set dimmer position at full brightness before adjusting to a lower light level.
* Please follow the dimming control manufacturer’s instructions for the installation of all dimming controls.
* Dimmable to 120V only.
Emergency Option WIring Diagram
INSTALLATION INSTRUCTIONS:
ProLED
®
8" and 10" LED Commercial Downlight High Performance
Installation Instructions
®