Installation Guide

© 2017 Halco Lighting Technologies, LLC. All rights reserved. Halco and ProLED are registered trademarks of Halco Lighting Technologies.
All sizes and specications are subject to change.
Halco Lighting Technologies | 2940 Pacic Drive | Norcross, GA 30071 | Toll Free 800.677.3334 | Phone [phone] | Fax [phone] | halcolighting.com | Atlanta | Carlstadt | Chicago | Cleveland | Houston | Phoenix
Linear LED Vaportight High Performance
Luminaire Installation Instructions
®
© 2017 Halco Lighting Technologies, LLC. All rights reserved. Halco and ProLED are registered trademarks of Halco Lighting Technologies.
All sizes and specications are subject to change.
Halco Lighting Technologies | 2940 Pacic Drive | Norcross, GA 30071 | Toll Free 800.677.3334 | Phone [phone] | Fax [phone] | halcolighting.com | Atlanta | Carlstadt | Chicago | Cleveland | Houston | Phoenix
IMPORTANT
READ INSTRUCTIONS CAREFULLY BEFORE INSTALLING. KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ProLED luminaires must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is required for safety.
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A QUALIFIED ELECTRICIAN WHO IS
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
WARNING - Risk of re or electric shock. Linear LED Vaportight High Performance Series installation requires knowledge of the luminaires’ electrical
systems. If not qualied, DO NOT attempt installation. Contact a qualied electrician.
WARNING - Risk of re or electric shock. Install this kit only in the luminaires that have the construction features and dimensions shown in the
photographs and/or drawings. DO NOT make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
WARNING - To prevent wiring damage or abrasion, DO NOT expose wiring to edges of sheet metal or other sharp objects.
WARNING - Risk of re or electric shock. DO NOT alter, relocate, or remove wiring, lampholders, power supply, or any other electrical component.
WARNING - This device is not intended for use with emergency exits.
WARRANTY INFORMATION:
This product is warranted for 5 years from the date of purchase. If this product does not perform to the specications supplied on this package, send
an email or write to the address below for product return and replacement. This replacement is the sole remedy available. Liability for incidental or
consequential damage is expressly excluded. Visit www.halcolighting.com for full warranty details and dimmer compatibility information.
Product # Product Code
Input Voltage
(V)
Input Current
(mA)
Input Wattage
(W)
99622
LVTH4CL40/850/3S/LED 100-277V
95 40
99623
LVTH4CL80/850/3S/LED 100-277V
95 80
99624
LVTH4CL40/850/3S/LED/MC 100-277V
95 40
99625
LVTH4CL80/850/3S/LED/MC 100-277V
95 80
99626
LVTH4CL40/850/3S/LED/EM 100-277V
95 40
99627
LVTH4CL80/850/5S/LED/EM 100-277V
95 80
Size A(mm) Size B(mm)
600 109
Size C(mm)
84
Standard 1200 109 84
1500 109 84
B
C
A
Size A(mm) Size B(mm)
600 109
Size C(mm)
84
Standard 1200 109 84
1500 109 84
B
C
A
Size A(mm) Size B(mm)
600 109
Size C(mm)
84
Standard 1200 109 84
1500 109 84
B
C
A
Specications
Amount of luminaires connectable in one phase
Product # Product Code Input Wattage (W) Maximum Qty (120V) Maximum Qty (277V)
99622
LVTH4CL40/850/3S/LED 40W 10 18
99623
LVTH4CL80/850/3S/LED 80W 5 9
99624
LVTH4CL40/850/3S/LED/MC 40W 10 18
99625
LVTH4CL80/850/3S/LED/MC 80W 5 9
99626
LVTH4CL40/850/3S/LED/EM 40W 10 18
99627
LVTH4CL80/850/5S/LED/EM 80W 5 9
Cable Standard
1. Length: 6.5mm<C<8.5mm
2. US:3*18AWG
3. VDE UL Standard waterproof
outdoor cable
1. "L"
1
2
3
2. "E"
3. "N"
Note:
Please Note:
We just provide the waterproof connector, pls choose the right cable according to the cable specs .