Specification

ProLED
®
T8 Series
Specifications
Description
Reliable and efficient linear fluorescent T8 replacement with ease of installation wiring for either single or double-ended
line voltage input in a single replacement LED lamp.
Construction
• Glass Lens
• Thermal limitation causes lamp to turn off if ballast
is left connected
Installation
• Single or double ended power
• T8 Linear Bypass will eliminate the need for a ballast
• AC line voltage wired to either single end or double
end of the lamp
Performance
• Operates on 120-277V line voltage
• 7W, 12W and 12.5W option
• L70 >50,000 hrs
• 83 CRI
Certifications
• cUL approved for damp locations
• ETL Sanitation Certificate
• DLC 5.0 Qualified. Refer to designlights.org for full list
of qualified products.
LED Lamps
Bypass Wiring
Page 1/2 Rev Date: 12/10/20
Halco Lighting Technologies 2940 Pacific Drive | Norcross, GA 30071 | Toll Free 800.677.3334 | Phone [phone] | Fax [phone] | halcolighting.com | Atlanta | Chicago |
Cleveland | Houston | Los Angeles | Phoenix © 2020 Halco Lighting Technologies, LLC. All rights reserved. Halco and ProLED are registered trademarks of Halco Lighting
Technologies. All sizes and specifications are subject to change
DATE: LOCATION:
TYPE: PROJECT:
CATALOG #:
DLC QualiedLow Maintenance 50,000 Hours 120-277
• No External Ballast Required
• Single or Double ended Power Ensures
Ease of Installation and Safety
• Suitable for totally enclosed fixtures
• 2', 3' and 4' Lengths for Multiple
Product Applications
• Thermal limitation causes lamp to turn
off if ballast was left connected
Line
Type B