Manual

Fyr Pak
Operation and Maintenance Manual
6
wire before working on engine or the equipment driven by engine.
11 Maximum speed of the engine is set. Do not tamper with the controls to adjust to run at higher speeds.
Excessive speed increases the hazard of personal injury and reduces engine life
12 Familiarize yourself with all controls, learn how to stop engine quickly in a emergency.
13 When shutting off a gasoline engine, be sure It is completely stopped before leaving the work area.
14 For proper handling, storing and transporting fuel, follow fuel tank manufacturer’s instructions sheet and/or
instructions printed on tank.
15 If tank is equipped with a closing vented cap, open when pumping.
16 Check engine fuel level before initial start-up each day.
17 Flush pump with fresh, clear water if pump has been used to pump salt water or water containing sand.
18 During freezing weather, drain the pump, throttle actuator tubing, and discharge lines after each use.
19 The pump must be primed with the hand pump and the priming valve closed before starting engine.
20 Do not operate the unit while it is being carried.
21 Wear hearing protection when operating the unit.