User’s Manual SC-12BT 12-Input Scaler Switch with HDBaseT Output, RS-232, and IP Control Variety of inputs: 4x HDMI, 4x VGA, and 4x AV 3 outputs: VGA, HDMI, HDBaseT Advanced audio with HDMI audio extraction Built-in audio power amp for connection to speakers Control via Front Panel, IR, RS-232 and IP port User friendly and intuitive design UMA1228 Rev 1.0 © Copyright 2015 Hall Research, Inc. All rights reserved.
Multi-Format Scaler Switch with HDBaseT Table of Contents 1.0 Introduction ____________________________________________________________ 3 2.0 Features _________________________________________________________________ 3 2.1 Package Contents _______________________________________ 4 3.0 Installation ______________________________________________________________ 5 3.1 Connecting the Video Inputs ______________________________ 5 3.2 Connecting the Scaled Outputs ____________________________ 6 3.
SC-12BT 1.0 Introduction The SC-12BT is a 12 input HD scaler that accommodates 4 HDMI, 4 VGA, and 4 AV inputs. Select any of the inputs by using the front panel push-buttons, IR, RS-232, or IP commands. The selected source is scaled to a fixed user definable resolution and simultaneously output in 3 convenient formats: VGA, HDMI, and HDBaseT (class B for easy extension to 70m / 230ft on a single UTP connection using compatible receivers or displays with built-in HDBaseT inputs).
Multi-Format Scaler Switch with HDBaseT 2.1 Package Contents 1x SC-12BT 1x Power Cord 1x IR Remote (batteries included) 4x Captive screw connectors (pluggable terminal blocks) - one attached to the RS-232 cable, the rest may be plugged in the back of the scaler as shown here. 4x Plastic cushions (rubber boots) that can be used for table top use 1x RS-232 cable 1x User’s Manual *All packages are carefully inspected prior to shipment.
SC-12BT 3.0 Installation The following diagram illustrates typical input and output connections that can be utilized with the SC-12BT within a typical system configuration: Typical installation diagram For convenience, output connectors on the rear panel have RED background. 3.1 Connecting the Video Inputs The SC-12BT supports connection to a variety of different input sources, making it a versatile addition to any AV installation. This unit supports four HDMI inputs, four VGA inputs(four 3.
Multi-Format Scaler Switch with HDBaseT 3.2 Connecting the Scaled Outputs The SC-12BT supports three different output types allowing flexible and reliable connection to a variety of displays and equipment. The output types of this model include VGA, HDMI, and HDBaseT (Class B or HDBaseT-Lite™). The video output area on the rear panel also has left and right line level analog audio outputs. 3.
SC-12BT 3.4 Audio Subsystem and Amplifier Connections It is important to understand the audio routing and mixing behavior of the scaler. Please refer to the block diagram below. The front panel has two separate audio volume/mute controls, one that affects the selected video input source, and one that affects the Auxiliary audio input. The resultant audio at the output is the sum (mix) of the two settings.
Multi-Format Scaler Switch with HDBaseT On the audio output side, the SC-12BT also offers amplified speaker outputs. capable of delivering 2x10 watts to 8 Ω or 2x20 watts to 4 Ω speakers. 4.0 Operation The SC-12BT can be controlled with the front panel buttons, an on-screen display in conjunction with IR remote, or from RS-232/Telnet commands. 4.1 Control via Front Panel Front panel controls and indicators The front panel is intuitive and easy to use.
SC-12BT The Sound menu is used for adjustment of bass, treble, balance, scene mode, and other smart volume settings. Once again, some parameters are only available depending on the specific input. The Settings menu offers the ability to change the OSD language, freeze video output, enable audio listen only, adjust VGA settings, and other advanced output adjustments (H/V position adjustment). 4.3 Infra-Red Remote Control Below is an image of the infrared remote control included with the SC-12BT.
Multi-Format Scaler Switch with HDBaseT 5.0 RS-232 and IP Control Commands The SC-12BT can be controlled via the RS232 port with the provided cable, or through Telnet Protocol via the TCP/IP terminal port # 8080. Use a DB9 Male-to-Female cable shipped with the scaler to connect it to the computer or external control device. Below a list of settings and commands provided to utilize these controls and set specific functions. 5.
SC-12BT Command S Colortemp X S Aspect X S PictureMode X S SoundMode X Response S Colortemp X S Aspect X S Picturemode X S Soundmode X Notes X = [ 1 - Normal, 2 - Warm, 3 - Cool ] X = [ 1 - Wide Screen, 2 - Subtitle, 3 - 4:3, 4 - No Scale, 5 - Full ] X = [ 1 - User, 2 - Soft, 3 - Standard, 4 - Bright ] X = [ 1 - News, 2 - Movie, 3 - User, 4 - Standard ] S Reset 1 S Output 1 S Output 2 S Output 3 S Output 4 S Output 5 S Freeze 1 S Freeze 0 S FWUpdate S HDMI 1 S HDMI 2 S HDMI 3 S HDMI 4 S VGA 1 S VGA 2 S V
Multi-Format Scaler Switch with HDBaseT Command R Keylock Response R Keylock X Notes Get Current Keylock Status X = 0,1,2,3 S IP X S SB X S GW X S DHCP 1 S DHCP 0 S IP X S SB X S GW X S DHCP 1 S DHCP 0 IP X DHCP Y X = VALID IP address. X = VALID Subnet Address X = VALID Gateway Address Enable DHCP Disable DHCP X = Current IP address of the Unit. Y = Current DHCP status (1 = Enabled , 0 = Disabled) R Ipconfig 6.
SC-12BT 7.0 Specifications Video Inputs Outputs Connectors 4x HDMI, 4x VGA, 4xAV (1s YPbPr, 1x S-Video, 2x Composite Video) 1x HDMI, 1x VGA, 1x HDBaseT (for extension to 70m or 230 ft max.) HDMI female, HD15 Female for VGA, RCA for Composite and YPbPr, MiniDin for S-Video, RJ45 for HDBaseT Input Standards HDMI 1.3, RGBHV, RGBs, RGsB, RsBsGs, NTSC 3.58, NTSC 4.42, PAL, SECAM Bandwidth HDMI: 4.95Gbps, CV/S-Video: 150MHz, YPbPr: 170MHz, VGA: 375MHz HDCP Support Supported (versions 1.0 to 1.
Multi-Format Scaler Switch with HDBaseT 7.
© Copyright 2015 Hall Research, Inc. All rights reserved. 1163 Warner Ave.