Owners manual

HDMI + USB + LAN Sender and Receiver
2
Table of Contents
1.0 Introduction 3
2.0 Features 3
2.1 Package Contents 3
3.0 Installation 4
3.1 Configuration 4
4.0 Operation 5
4.1 Transmitter’s Front Panel 5
4.2 Transmitter’s Rear Panel 6
4.3 Receiver’s Front Panel 6
4.4 Receiver’s Rear Panel 7
4.5 Sender and Receiver Serial Data Connection 8
4.6 ARC Switch 8
4.7 IR Remote Extension 9
5.0 Troubleshooting 10
5.1 Contacting Hall Research 10
5.2 Shipping and Packaging 10
6.0 Specifications 11
TRADEMARKS USED IN THIS MANUAL
Hall Research and its logo are trademarks of Hall Research. Any other trademarks mentioned in
this manual are acknowledged as the property of the trademark owners.
FCC RADIO FREQUENCY INTERFERENCE STATEMENT
This equipment generates, uses, and can radiate radio frequency energy and if not installed and used
properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio
communication. It has been designed to comply with the limits for a Class A computing device in
accordance with the specifications in Subpart B of Part 15 of FCC rules, which are intended to provide
reasonable protection against such interference when the equipment is operated in a commercial
environment. Operation of this equipment in a residential area is likely to cause interference, in which
case the user at their own expense will be required to take whatever measures may be necessary to correct
the interference.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.