Owners manual

UH2X-P1

1.0 Introduction

The UH2X-P1 is an HDMI over single CAT5e/6 Transmitter and Receiver set. The

product can extend uncompressed audio/video along with IR, IP, RS232, USB, and

power using a single run of CAT5e/6 cable up to 100m long. The UH2X-P1 supports

4K (UHD) and 3D video. The extender boasts audio return extension. The

independent audio return source is user selectable. It can be either from the ARC pin

of the HDMI connector at the Receiver (ARC signal from the connected TV), or

from a separate SPDIF audio input connector provided on the Receiver.

The Receiver provides 2 USB 2.0 ports acting like a USB hub. The 48V PoH design

can power the Receiver (PD) from the Transmitter (PSE) eliminating the need for a

separate power supply for the Receiver.

2.0 Features

• Fully compliant with HDBaseT 2.0 specifications

• Supports Full HD (1080p/60), 3D and deep color to 100m

• resolutions to 4Kx2K (UHD) up to 60m

• Extends USB 2.0 and has integrated 2-port Hub in the Receiver

• Perfect for KVM extension.

• Extends Ethernet (100BaseT), bi-directional IR and RS232 control signals

• Front panel LED indicators for status monitoring

• Plug and play installation – takes minutes to setup

• Supports pass through of HDMI embedded audio formats: LPCM 2/5.1/7.1

Channel, Dolby Digital 2~5.1 Channel, Dolby Digital Plus, Dolby TrueHD

and DTS-HD Master Audio

• Supports HDMI ARC and external SPDIF digital audio return

• Supports HDMI Locking Cable

• USB ports can power devices such as audio extractors (Model HD-AUD)

2.1 Package Contents

Transmitter – UH2X-S-PSE

Receiver – UH2X-R-PD

Qty (1) UH2X-S-PSE

Qty (1) UH2X-R-PD

Qty (1) 48V DC Power Adapter

Qty (1) IR Remote Detector cable

Qty (1) IR Remote Emitter cable

Qty (1) User’s Manual

*All packages are carefully inspected prior to shipment. However if you think that

you are missing an accessory, please contact Hall Research Support for further

assistance.