Use and Care Manual

20
6. Below is an example of both positions.
7. Replace the cap back on the regulator.
8. Next you will remove the grates, burners and burner caps from the cooktop to
access the orifices.
9. You will need a 7mm wrench to remove the orifices. Each orifice can be accessed
easily - the larger burner orifice is located on the burner wall.
10. Remove all NG orifices and place in a separate bag and store with your manual
for future use.
11. Take the LPG orifices provided and install them as shown below – each orifice is
stamped with the size. You may require a magnifying glass to see this stamping.
See below for rating of orifice for each model
LPG Left Front Left Rear Middle/Center Right Front Right Rear
HGC2401ST .94 mm .75 mm N/A 1.25 mm .57 mm
HGC3001ST .96 mm .75 mm 1.25 mm .96 mm .57 mm
HGC3601ST .96 mm .75 mm 1.25 mm .96 mm .51 mm
Orifice Locations