Use and Care Manual

22
1. Shut off gas leading to appliance.
2. Unplug any electrical connections if you are using the 110V option, usually
located under the cooktop.
3. Locate convertible regulator under the cooktop, remove cap and pop out the
pin that’s attached.
4. Below you will see the pin positon for use with LPG.
5. Pull out pin and flip it to the NG position – see below.
6. Below is an example of both positions.
7. Replace the cap back on the regulator.
8. Next you will remove the grates, burners and burner caps from the cooktop to
access the orifices.