Use and Care Manual

10
ALIGNMENTS AND ADJUSTMENTS
Installation
It is the responsibility of the installer to make certain that the cooktop is properly
adjusted at the time of installation. Situations caused by improper adjustments or
improper installation are not covered under the warranty. Any expenses incurred due
to such situations will not be paid by the manufacturer of the appliance.
Clearances
Model A – to back
wall
B – above
cooktop
C – side and
above
countertop
D – to any
side wall
E - to left
or right of
cooktop
adjacent
opposite
wall
F – to front of
countertop/fro
nt vertical face
of overhead
countertop
G- max depth
of cabinets
installed above
the cooking top
HGC2401
ST
3”/7.6 cm 30”/76.2 cm 18”/45.7 cm 8”/20.3 cm 36”/91.4 cm 1.5”/3.8 cm 13”/33.02 mm
HGC3001
ST
3”/7.6 cm 30”/76.2 cm 18”/45.7 cm 8”/20.3 cm 36”/91.4 cm 2”/5.1 cm 13”/33.02 mm
HGC3601
ST
3”/7.6 cm 30”/76.2 cm 18”/45.7 cm 8”/20.3 cm 36”/91.4 cm 2”/5.1 cm 13”/33.02 mm
Make sure there is a power outlet within the reach of the cooktop’s power supply
cable (within 36 "/30 cm from the left side of the cooktop). The outlet should be
accessible with the cooktop installed.