Instructions / Assembly

ManualsBrandsHallman ManualsDuctless Mini Splits18,000 BTU 1.5-Ton Ductless Mini-Split Air Conditioner with Heat Pump 230V/60HZ

16122000A27418

REMOTE CONTROLLER

OWNER S M ANUAL

Please read this Owner's Manual carefully before operation.

Save this manual in a safe place for future reference.

The design and specifications are subject to change without

prior notice for product improvement. Consult with the sales

agency or manufacturer for details.

Summary of content (6 pages)

PAGE 1
OWNER S MANUAL REMOTE CONTROLLER The design and specifications are subject to change without prior notice for product improvement. Consult with the sales agency or manufacturer for details. Please read this Owner's Manual carefully before operation. Save this manual in a safe place for future reference.
PAGE 2
CONTENTS Remote Controller Specification Remote Controller Specification............................................... 1 Model Performance Features-------------------------------------------------------1 Rated Voltage 3.0V(Dry batteries Lr03 Features of the Remote controller Buttons ............................. 1 Transmission Distance 8m Indicators on Display panel.........................................................3 Operating the Remote Controller...........................................
PAGE 3
1 2 TEMP Button : Push this button to decrease the indoor temperature setting in 1oF increments to 62OF. TEMP Button : Push this button to increase the indoor temperature setting in 1oF increments to 86OF. 12 NOTE: Press and hold and buttons together for 3 seconds will alternate the temperature display between the OC & OF scale.
PAGE 4
3 4 5 6 7 ON/OFF Indicator: This symbol appears when the unit is turned on by the remote controller, and disappear when the unit is turned off. OPERATION MODE Indicator: When press the MODE button, it shows the current operating mode -- AUTO COOL DRY HEAT (Cooling only model without) mode. LOCK Indicator: LOCK display is displayed by pushing the LOCK button. Push the LOCK button to clear display. TIMER DISPLAY Indicator: This display area shows the settings of the TIMER.
PAGE 5
DRY Operation 1. Push the MODE button to select DRY. 2. Push the TEMP button to set the desired temperature within a range of 62OF ~ 86OF. 3. Push the ON/OFF button, the OPERATION lamp lights and the air conditioner starts to operate in DRY mode at LOW fan speed. Push the ON/OFF button again to stop this unit operation.
PAGE 6
NOTE: The device could comply with the local national regulations. In Canada, it should comply with CAN ICES-3(B)/NMB-3(B). In USA, this device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.