Installation Guide

- 23 -
Troubleshooting
Before calling for service, review this list. It may save you both time and expense. This list
includes common occurrences that are not the result of defective workmanship or materials
in this appliance.
Remedial action
No display on the
display
panel
The mains plug of the appliance
is not in
the socket properly.
Check whether the power is on .
Alarm sound
The compressor do
not
work
Compressor runs
too long
Vibrating noise
Door is slightly open or
not close more than 1
minute.
lt's under defrosting
mode. Power is not
connected well.
The fridge has recently been dis-
connected for a period of time;
Put too much fresh
or hot food ;
Doors are opened
too frequentlyor
too long.
Floor is uneven or weak ;
ltems placed
on the top of the fridge
are
vibrating;
Fridge is touching wall
or cabinets.
Close the door
completely.
lt's normal for defrosting;
Check whether
the
power is connected
well.
lt takes some hours for the
fridge to cool down
completely ;
Hot food will cause the
fridge to
run longer until
the desired temperature
is reached
;
Warm
air entering the
fridge cause it
to run
longer.
Open the door
less
often.
Be sure floor is level
and
solid and can
adequately support
fridge;
Remove items;
Move fridge so that does
not touch the wall or
cabinets ;
Maintenance
Possible
cause
Fault