Installation Guide

S
y
m
p
t
om
Poss
ibl
e
Ca
u
se
S
o
lu
t
i
on
BURNER FLAME
GOES OUT AT
LOW SETTING.
Low gas
pressure.
Air intake holes
around burners
are obstructed.
Contact gas company.
Remove obstruction from air intake holes.
Simmer setting is to low
THE FLAMES
HAVE
SUDDENLY
GONE OUT.
A draft or spill
has extinguished
the flame.
Turn the burners off, cleaning the burners
and sump area. See “Care and Cleaning” for
instructions. Once clean reignite top burners.
NO IGNITION
SPARK
Dead batteries
or ignition
module failed.
Replace batteries and attempt ignition. If
there is still no spark ignition, the rangetop
burners can still be used.
To light them:
1.) Holding a lit match to the flame spreader,
push in on the control knob and turn
counter clockwise to LIGHT.
2.) When the flame is burning all the way
around the burner, you may adjust the
hea
t
.
“CRACKING”
OR “POPPING”
SOUND IS HEARD
COMING FROM
RANGETOP
This is the sound
of metal heating
and cooling.
This is normal.