Specifications

Hallowell

H-Post High Capacity Closed Shelving Specifications (page 2)
Shelves –Extra Heavy Duty: Formed with two ribs along the horizontal front and rear edge and are
stamped on the top left corner for identification. Class 2 shelves are fabricated from extra heavy gauge
cold rolled steel and have roll formed rectangular tubular shaped front and rear edges with return bends
resistance welded to the under side of shelf. Welds are spaced 3" on center to provide maximum
strength. Sides are triple flanged to form a channel. All four corners are lapped and resistance welded to
provide a rigid corner and add extra strength to the shelf. Top surface shall be punched for attaching
Shelf Dividers from left to right on 1-1/2" centers front and back, for 36" wide x 12", 15", 18" and 24"
deep shelves. All other sizes are punched on 3" centers. Front and rear surfaces are punched for
attaching accessories. Tubular front edge is designed to protect against impact loads. Used for
uniformly distributed loads up to 1,200 pounds.
Shelf Clips: Shall be a one piece compression clip drawn from 13 gauge cold rolled steel and zinc
plated. Fits snugly against side of post to hold shelves in place. Provide four per shelf.
Universal Clip: Fabricated from 16 gauge cold rolled steel formed into an angle with three slotted
holes on one flange and one long slot in the other flange, which is also offset to fit in Beaded Front Post.
Provide when Swinging Doors are required.
Color for all painted components: Posts and side panels shall be Hallowell #707 Marine Blue,
Shelves and back panels shall be Hallowell #711 Platinum.