Specifications

Hallowell

Heavy-Duty Ventilated (HDV)
KD Wardrobe and Box Lockers
General: Lockers shall Be "Hallowell Heavy-Duty Ventilated (HDV) KD Wardrobe and Box
Lockers" as manufactured by Hallowell, Div. List Industries Inc. or approved equal. Fabricate lockers
square, rigid and without warp, with metal faces flat and free from dents or distortion. Make all exposed
metal edges safe to touch. Weld frame members together to form rigid, one-piece structure. Weld, bolt,
or rivet other joints and connections as standard with manufacturer. Grind exposed welds flush. Do not
expose bolts or rivet heads on fronts of locker doors or frames except for fastening of number plates and
recessed handle.
Lockers shall be GREENGUARD Children & Schools Certified
SM
Finishing: All locker parts to be cleaned and coated after fabrication with a seven stage zinc/iron
phosphate solution to inhibit corrosion, followed by a coat of high grade custom blend powder
electrostatically sprayed and baked at 350 degrees Fahrenheit for a minimum of 20 minutes to provide a
tough durable finish. Color to be selected from manufacturer's standard list of colors. Interior
components to be painted choice of #729 Parchment or #725 Hallowell Gray. Two-Tone Color
Combination: Shall be at no additional cost with the locker frame and trim chosen from one color
and the doors may be one of any other color chosen from manufacturers standard selection.
Frame: Fabricate of 16 gauge (minimum) channels, with integral continuous door stop/strike formed on
both latch and hinge side vertical members. Cross frame members of 16 gauge channel shapes,
including intermediate cross frame members on double and triple tier (frames with doors over 18" high)
lockers shall be securely welded to the vertical framing members to ensure rigidity. Rubber bumpers
shall be provided to cushion door closing.
HDV Wardrobe Doors: Doors 20” high and higher shall be fabricated from single sheet prime 14
gauge with single bends at top and bottom and double bends at the sides. The channel formed by the
double bend at the latch side is designed to fully conceal the lock bar. Doors to be perforated with 5/8” x
1-1/2” diamonds.
HDV Box Doors: Doors 18" high and under to be fabricated from single sheet prime 14 gauge with
single bends at top, bottom and sides. Doors shall include a combination friction catch door pull.
Padlock Strike Plates are optional. Doors shall be fabricated to accept a built-in combination lock or
padlock. Doors with projecting spring latches shall not be acceptable. Doors to be perforated with
7/16” x 15/16” diamonds.
Stainless Steel Recessed Locker Handle: All wardrobe doors shall have recessed a seamless deep
drawn stainless steel handle shaped to receive a padlock or built-in combination lock. The recess pan
shall be deep enough to have the lock be flush with the outer door face. Box doors shall be equipped
with a combination friction catch door pull as stated above.