Specifications

Hallowell



Heavy-Duty Ventilated (HDV) KD Wardrobe and Box Lockers (Page 2)
Latch Assembly: The latching mechanism for wardrobe doors shall be finger lift control type
constructed of 14 gauge (minimum) steel with a nylon cover that has a generous finger pull. Spring
activated nylon slide latches shall be completely enclosed in the lock channel allowing doors to close
with the lock in the locked position. Locking devise shall be designed for use with either built-in
combination locks or padlocks. Latch hooks shall be securely welded to the vertical frame channel on
the strike side to engage the nylon slide latches. Three latch hooks for doors 48" and higher, two latch
hooks for doors under 48" high.
Door Hinges: All doors shall include a 16 gauge continuous piano hinge welded to the door and
riveted to the frame. All doors to be right hand, side hinged.
Body: Fabricate backs of 18 gauge (minimum) solid sheet, sides of 16 gauge (minimum) sheet steel
with double flanged connections extending full height. Sides to be diamond perforated for added
ventilation. Form top, bottom and intermediate tier dividers of 16 gauge (minimum) solid sheet steel
with single return bends at all sides. Bolt top and bottom as well as horizontal tier dividers of wardrobe
openings to front horizontal frame members at not less than one place in addition to side panels. Form
hat shelves at 60” and 72” high single tier lockers of 16 gauge (minimum) sheet steel with single bends
at sides and back and a double bend at front.
Locks (If Required): Shall be master keyed to one system for the entire project. (See lock use chart for
suggested lock application).
Equipment: Furnish each locker with the following items, unless otherwise shown.
Single tier lockers: Openings 60” and 72” shall include one hat shelf, one double prong ceiling
hook and a minimum of two single prong wall hooks.
Double tier lockers: Openings 30” and 36” high shall include one double prong ceiling hook
and a minimum of two single prong wall hooks.
Triple tier lockers: Openings 20” and 24” high shall include one double prong ceiling hook
only.
Box lockers: No hooks
Two-Year Warranty: Hallowell KD lockers are covered against all defects in materials and
workmanship excluding finish, damage resulting from deliberate destruction and vandalism under this
section for a period of two years.