Indoor Furnishings User Manual

353
ARCHITECTURAL TRACK LIGHTING Low Voltage
COOPER LIGHTING
HALO
®
• ARCHITECTURAL FLEXIBLE TRACK
• HALO LINEAR ARCHITECTURAL TRACK
• HALO POWER-TRAC
Dimensions
Electrical Quick Lock Adapter
Flexible Track Models:
Die Cast housing. Attaches electrically and mechanically anywhere along track.
Halo Power-Trac Models:
Polycarbonate housing. Attaches electrically and mechanically anywhere along track.
Halo Architectural Track Models:
Polycarbonate housing with integral fuse and on-off switch. Attaches electrically and mechanically anywhere along track.
L
W
Max
Extension
Description
Synchro MR16 Lampholder
Lamp: 75W MR16 (when using blue filter or
three pieces of media, de-rate lamps
to 50W)
Finish: Aluminum Haze (AH)
Accessories: Accepts up to 3 media. Refer to
media page.
Dimensions
L
W
Max
Extension
Lamp: 75W AR111
Finish: Aluminum Haze (AH)
Accessories: Accepts up to 3 media
L200 Series Lenses
L275MB Cube Cell Louver
L250 Linear Spread Lens
L265 Prismatic Spread Lens
Track
LF=Flexible Track
L=Halo Power-Trac
LA=Halo Architectural
Track
Lamp Type
2=Low Voltage
Series
06=Synchro
Lamp
16=MR16
111=AR111
Finish
AH=Aluminum Haze
P=White (L, LA and LR only)
MB=Black (L, LA and LR only)
206
Synchro MR16 Lampholder
Length (L): 9.4” [239mm]
Width (W): 3.0” [76mm]
Max Extension:
Halo Flexible Track 12.6” [320mm]
Halo Power-Trac 13.00” [330mm]
Halo Architectural Track 13.75” [349mm]
Synchro AR111 Lampholder
Length (L): 10.5” [266mm]
Width (W): 5” [127mm]
Max Extension:
Halo Flexible Track: 14.75” [374mm]
Halo Power-Trac: 15.25” [387mm]
Halo Architectural Track: 13.75” [349mm]
Halo
Flexible Track
Halo
Power-Trac
Halo
Architectural Track
Halo
Flexible Track
Halo
Power-Trac
Halo
Architectural Track
SYNCHRO
MR16 Low Voltage
SYNCHRO
AR111 Low Voltage
• Cylinder with rectangular
cross section yoke, lockable
tilt and rotation aiming and
graduated aiming guides
• Aluminum die cast yoke
allows lampholder to rotate
330° and provides 0° to 90°
vertical pivot for maximum
aiming adjustability.
• Lampholder tilt and
rotation can be locked in
place easily without the use
of tools.
• Machined, Extruded and
Die Cast Aluminum
cylinders.
• Fixture provided with cover
glass (required for use with
lamps that are not rated for
use with open fixtures).
Description