Specification Sheet

Halo
SPECIFICATION FEATURES
Trim combinations include Specular Clear Reflector with Matte White or Polished Chrome trim ring, Satin
Nickel reflector and trim ring, and Tuscan Bronze reflector and trim ring. Three pressure springs ensure positive
retention in housing.
3007 is designed for use with the following Halo H3 small aperture housings:
 •LineVoltageHousing(for120VGU10lamps).
H36ICAT 50W IC Air-Tite Housing
H36TAT 50W Non-IC Air-Tite Housing
H36RTAT 50W Non-IC Air-Tite Remodel Housing
 •LowVoltageHousing(for12VMR16lamps).
  H36LVICAT 50W ICAir-TiteHousing
  H36LVTAT 50W Non-ICAir-TiteHousing
  H36LVRTAT 50W Non-ICAir-TiteRemodelHousing
  H36LVTAT277 50W Non-ICAir-TiteHousing,120/277V
  H36LVRTAT277 50W Non-ICAir-TiteRemodelHousing,120/277V
 •LineVoltageHousing(for120VGU10lamps).
H38ICAT 50W IC Air-Tite Housing
 •LowVoltageHousing(for12VMR16lamps).
  H38LVICAT 37W ICAir-TiteHousing
Regressed glass lens adjustable downlight shower trim with reflector is
designed for use with IC or Non-IC AIR-TITE™ 3" Halo small aperture
line and low voltage housings. Models 3007WHC, 3007PCC and 3007SN
are "dead-front" featuring a glass lens with non-conductive and non-
corrosive polymer trim rings. Model 3007TBZ has a die-cast trim ring.
ThiswetlocationlistedshowertrimusesMR16lowvoltageorGU10line
voltage lamps, ideal for accent and task lighting. Regressed lens trim
offers15°tiltwith360°orientationwithinhousing.
DESCRIPTION
3007WHC
White with Specular Clear Reflector
3007SN
Satin Nickel with Satin Nickel
Reflector
3007TBZ
Tuscan Bronze with Tuscan Bronze
Reflector
3007PCC
Polished Chrome with Specular
Clear Reflector
3007
3" Regressed Lens
Showerlight Trim
3" TRIMS
Reflector
Diameter
Lamp
Aperture
Ceiling Opening
Outside Diameter
Lamp Aperture: 2" [51mm]
Reflector Diameter: 3" [75mm]
Ceiling Opening: 3-3/4" [95mm]
Outside Diameter: 4-1/4" [108mm]
Catalog #
Type
Date
Project
Comments
Prepared by
SAMPLE NUMBER: 3007PCC
Order housing and trims separately.
Trim Finish
3007= 3" Lensed Showerlight
Trim
WHC=White with Specular Clear Refl ector, Glass Lens, and Polymer Trim Ring “Dead-Front”
PCC=Polished Chrome with Specular Clear Refl ector, Glass Lens, and Polymer Trim Ring “Dead-Front”
SN=Satin Nickel with Satin Nickel Refl ector, Glass Lens, and Polymer Trim Ring “Dead-Front”
TBZ=Tuscan Bronze with Tuscan Bronze Refl ector, Glass Lens, and Die-Cast Trim Ring “Dead-Front”
ORDERING INFORMATION
ADV091560
2009-09-1414:36:29
Specifications and
dimensions subject to
change without notice.
Eaton
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting