Specification

HOUSING COMPATIBILITY
The BLD6 is UL Certified for use with any 5 or 6 inch diameter recessed housing constructed of steel or aluminum with an internal volume that exceeds 107.9 in3 in addition to those
noted below. Note: Some other’s housings require installation with included friction clips.
Compatible Halo LED Housings with LED luminaire connector
(high-efficacy compliant)
HALO
LED
Recessed
Can Size
Catalog Number
5"
H550ICAT, H550RICAT, E550ICAT,
E550RICAT
6"
H750ICAT, H750RICAT, H750T,
H750RINTD010, H750TCP, H2750ICAT,
H2750RICAT, E750ICAT, E750RICAT
Halo LED Retrofit Enclosures
HALO 6"
ML7BXRFK, ML7E26RFK
Compatible Halo Incandescent E26 Screwbase Housings
HALO
5"
H5ICAT, H5RICAT, H5ICATNB, H5T,
H5RT, H25ICAT, H25ICATNB, E5TAT,
E5RTAT, H5TNB, E5TATNB, E5ICAT,
E5RICAT, E5ICATNB
6"
H7ICAT, H7RICAT, H7ICT, H7RICT,
H7ICATNB, H7ICTNB, H7T,
H7RT, H7TNB, H7TCP, H7UICT,
H7UICAT, H27ICAT, H27RICAT,
H27T, H27RT, E7ICAT, E7RICAT,
E27ICAT, E27RICAT, E7ICATNB,
E7TAT, E7RTAT, E7TATNB, E27TAT,
E27RTAT
4" square deep steel box
4" x 4" x 2-1/8"
(102mm x 102mm x 54mm)
COMPATIBLE WITH MANY OTHER JUNCTION BOXES*
COMPATIBLE WITH EATON’S CROUSE-HINDS JUNCTION BOXES
4" octagon light fixture/fan steel box
4" x 4" x 2-1/8"
(102mm x 102mm x 54mm)
• TP316 - for non-metallic cable
• TP317 - for metal clad cable
• UL Listed
• Refer to www.crouse-hinds.com
TP316
for non-metallic cable
4” x 4” x 2-1/8”
(102mm x 102mm x 54mm)
TP317
for metal clad cable
4” x 4” x 2-1/8”
(102mm x 102mm x 54mm)
4" square standard steel box
4" x 4" x 1-1/2"
(102mm x 102mm x 38mm)
4" octagon steel box
4" x 4" x 1-1/2"
(102mm x 102mm x 38mm)
3-1/2" round old work
non-metallic box
4-1/4" O.D. flange, 3-1/2" I.D. x 2-5/8”
(108mm O.D., 89mm I.D. x 67mm)
4" round new work non-metallic
light fixture/fan box
4" diameter x 2-3/16"
(102mm x 56mm)
3-1/2" round new work
non-metallic ceiling box
3-1/2" diameter x 2-3/4"
(89mm x 70mm)
4” round surface mount box
4" diameter x 1-1/2”
(102mm x 38mm)
Requires SLD6RAD adapter
4" round new work non-metallic box
with hanger bar assembly
4" diameter x 2-3/16" (102mm x 56mm)
Round ceiling pan
4” diameter x 13/16”
(102mm x 21mm)
Note: only compatible with fixed CCT BLD606930
BLD6 Series
HALO
*This is a representative list of compatible junction boxes only. Information contained in this literature about other manufacturers’ products is from published information made available
by the manufacturer and is deemed to be reliable, but has not been verified. Eaton makes no specific recommendation on product selection and there are no warranties of performance or
compatibility implied. Installer must determine that site conditions are suitable to allow proper installation of the mounting bracket in the box.