Specification

HALO
®
Catalog #
Type
Project
Comments
Date
Prepared by
E5RICAT
5” IC, Air-Tite,
Remodel Housing
E26 Screw base housing
Dimensions
Specification Features
Description
The Halo E5 series consists of compact and efficient recessed housings
optimized and listed for PAR20 and PAR30, EISA compliant, tungsten-hal-
ogen, CFL and LED lamps as well as incandescent. The Halo E5 remodel
housing is suitable for residential or light commercial applications. For
installation in insulated ceilings* and non-insulated ceilings; with airtight
code compliant construction. Remodel housing is designed for instal-
lation from below the finished ceiling. Use with a variety of trims and
finishes to create different lighting effects or to match any decor. May be
retrofit with HALO LED lighting systems.
Housing
•
Single wall die-formed aluminum
housing
•
Housing features a precision rolled
interlocking collar which maintains
aperture geometry for greater
assurance of installation results
•
Integral Air-Tite gasket for code-
required gasket between fixture
and finished ceiling - seals aperture
without need for additional caulk
•
Shipped with socket overspray
protector installed
•
For installation from below the
finished ceiling. Integral flange
secures fixture against ceiling
Remodel Retention System -
Speed Clamps
•
Exclusive two integral speed clamps
securely lock housing to ceiling,
accommodating 3/8” to 2” ceiling
materials
•
Use screwdriver or power driver to
set clamps
Socket Plate
•
Rigid socket plate adjusts and locks
without tools for various lamp sizes.
•
Socket plate and bracket may
be removed when using socket
supporting trims
Includes:
Remodel Speed Clamps
•
(2) Exclusive integral speed clamps
•
Speed clamp tabs securely lock to
ceiling
•
Speed clamps can be loosened for
easy repositioning
•
Speed clamps feature internal drive
screws – a power screwdriver
speeds installation
•
Two-tier tabs adjust for 3/8” to 2” of
various ceiling materials
Attached-Arm Design
•
Attached arm gets into tight spaces
•
Ease of installing through the ceiling
aperture
•
Smaller footprint for packing and
distributor shelf space
Hinged junction box w/
Slide-N-Side™
•
(4) ½” conduit pry-outs
•
(2) Slide-N-Side™ Non-Metallic (NM)
wire traps, allow wiring outside the
box
•
For 14-2, 14-3, 2-2, 12-3 U.S. and
14-2, 14-3, 12-2 Canadian
•
Hinged door for easy access
Quick Connect™ Wiring Tray
•
(3) Color coded push wire nuts
in captive tray for one-handed
connection
•
Aids in speed & reliability
•
Clear caps for wire connection
visibility
cULus Listed
•
Compact 10 in
3
box volume
•
Listed for maximum (6) No. 12 AWG
or (8) No. 14 AWG 90˚ C splice
conductors in box
Remodel Flange
•
Die formed flange maintains precise
whole circumference
•
Integral flange secures fixture
against the ceiling
Air-Tite™ code compliant
•
Certified under ASTM E283
•
Exclusive gasket seals aperture,
frame & ceiling
•
No additional caulk required
Socket
•
Porcelain socket with nickel plated
brass screw shell
•
Snap-in springs secure socket to
socket plate, and may be detached
when using socket supporting trims
Thermal Protector
•
Self resetting thermal protector
deactivates fixture if overheating
occurs due to improper lamping or
misapplied insulation
Trims
•
Halo Fit-All concept offers
multiple trim options in a variety
of design styles, and functional
beam distributions to control
beam angle and lumen delivery in
accommodating various lamp types
including Halogen, CFL and LED
Compliance
•
cULus Listed 1598 Luminaire
•
cULus Listed Damp Location
•
cULus Listed for Wet Location,
covered ceiling, with select trims
•
cULus Listed for direct contact with
insulation and combustible material*
•
Air-Tite code compliant. Certified
under ASTM E283; not exceeding
2.0 cfm (0.944 L/s) air leakage rate
tested at a 1.57 psf (75 Pa) pressure
differential
•
RoHS compliant
*Not to be used in direct contact with
spray foam insulation (Consult NEMA
LSD57-2013)
FOR USE IN INSULATED
CEILINGS
FOR DIRECT CONTACT
WITH INSULATION*
1/2"
[1
3mm]
E5RICAT
7-1/16"
[179mm]
5-3/4"
[146mm]
9-5/8"
[246mm]
6-1/4"
[157mm]
Ceiling opening to
match template supplied
1/2"
[13mm]
E5RICAT
7-1/16"
[179mm]
5-3/4"
[146mm]
9-5/8"
[246mm]
6-1/4"
[157mm]
Ceiling opening to
match template supplied
TD518060EN
2/09/2016
Special Features
Hinged J-Box with Slide-N-Side™
Quick Connect™ push wire nuts
Air-Tite™ code compliant