Specification

HALO
®
Catalog #
Type
Project
Comments
Date
Prepared by
E7TAT
6” Non-IC, Air-Tite,
New Construction Housing
E26 Screw base housing
Dimensions
Specification Features
Description
The E7TAT is a compact and efficient recessed Non-IC housing
optimized and listed for EISA compliant tungsten-halogen, CFL and LED
lamps as well as incandescent. Housing is suitable for residential or
light commercial applications. For installation in non-insulated ceilings; if
ceiling insulation is present it must be kept 3” from all sides of housing.
Housing features Air-Tite code compliant construction. Use with a variety
of trims and finishes to create different lighting effects or to match any
decor. May be retrofit with compatible HALO LED lighting systems.
Housing
•
Single wall die-formed housing
•
Housing features a precision rolled
interlocking collar which maintains
aperture geometry for greater
assurance of installation results
•
Integral Air-Tite gasket for code-
required gasket between fixture
and finished ceiling - seals aperture
without need for additional caulk
•
Shipped with socket overspray
protector installed
•
May be removed from the plaster
frame to provide access to junction
box
Socket Plate
•
Rigid socket plate adjusts and locks
without tools for various lamp sizes.
•
Socket plate and bracket may
be removed when using socket
supporting trims.
Plaster Frame
•
Galvanized steel frame. Housing
adjusts in plaster frame to
accommodate up to 3/8” - 1” ceiling
thickness.
•
(2) Regressed locking screws for
securing hanger bars
•
Integral Air-Tite gasket seals housing
and meets code-required gasket
between fixture and finished ceiling
Includes:
Bar Hangers
All Nail!™
•
Integral precisely positioned nail for
engineered and natural framing
•
Mini-foot leveling flange
•
Integral T-Grid Clip, no accessory
clips required
q-Channel bars with Pass-N-Thru™
•
Unique inverted “q” interlocking
channel for rigidity and stability
•
Pass-N-Thru™ feature allows bars to
cross-over for tool-less shortening in
tight spaces
Hinged junction box w/
Slide-N-Side™
•
(4) ½” conduit pry-outs
•
(3) Slide-N-Side™ Non-Metallic (NM)
wire traps, allow wiring outside the
box
•
For 14-2, 14-3, 12-2, 12-3 U.S. and
14-2, 14-3, 12-2 Canadian
•
Hinged door for easy access
•
Box is repositionable 90˚ on frame to
avoid obstructions
Quick Connect™
•
(3) Push wire nuts included, for
speed & reliability
•
Clear caps for wire connection
visibility
cULus Listed
•
Compact 16 in
3
volume
•
Listed for max. (10) No. 12 AWG
or (14) No. 14 AWG 90˚ C splice
conductors in box
Air-Tite™ code compliant
•
Certified under ASTM E283
•
Exclusive gasket seals aperture,
frame & ceiling
•
No additional caulk required
Socket
•
Porcelain socket with nickel plated
brass screw shell
•
Snap-in springs secure socket to
socket plate, and may be detached
when using socket supporting trims
Thermal Protector
•
Self resetting thermal protector
deactivates fixture if overheating
occurs due to improper lamping or
misapplied insulation.
Trims
•
Halo Fit-All concept offers
multiple trim options in a variety
of design styles, and functional
beam distributions to control
beam angle and lumen delivery in
accommodating various lamp types
including Halogen, CFL and LED
Compliance
•
cULus Listed 1598 Luminaire
•
cULus Listed Damp Location
•
cULus Listed for Wet Location,
covered ceiling, with select trims
•
Air-Tite code compliant. Certified
under ASTM E283; not exceeding
2.0 cfm (0.944 L/s) air leakage rate
tested at a 1.57 psf (75 Pa) pressure
differential
•
RoHS compliant
TD518048EN
2/22/2016
Special Features
All-Nail!™ bar hangers
q-Channel bars with Pass-N-Thru™
Hinged J-Box with Slide-N-Side™
Quick Connect™ push wire nuts
Air-Tite™ code compliant
10-3/8"
[263mm]
7-1/4"
[185mm]
1/2"
[1
3mm]
6-3/4"
[171mm]
6-1/2"
[165mm]
Ceiling opening
10-3/8"
[263mm]
7-1/4"
[185mm]
1/2"
[13mm]
6-3/4"
[171mm]
6-1/2"
[165mm]
Ceiling opening