Specification

HALO
®
A
D
C E
B
H1499T75
4" Non-Insulated
Ceiling
Low Voltage
Recessed Housing
4" TRIMS
5"
[127mm]
1/2"
[13mm]
4 1/2"
[114mm]
Ceiling
Opening
COOPER LIGHTING
Top
View
FOR USE IN NON-
INSULATED CEILINGS
OR
INSULATED CEILINGS
WHERE INSULATION
CAN BE KEPT 3"
FROM ALL SIDES OF
FIXTURE
6"
[152mm]
10 7/8"
[276mm]
UPGRADE FEATURES:
• GOT NAIL!™ BAR HANGERS
• PASS-N-THRU™ BAR HANGERS
• REGRESSED LOCKING SCREW
• HALO ID ON PLASTER FRAME
DESCRIPTION
The H1499T75 is a small aperture low voltage housing for
providing accent and task lighting with up to 75W 12V MR16
lamps. The H1499T75 is designed for use in non-insulated ceiling
or for insulated ceilings but insulation MUST be kept 3" from all
sides of the housing.
ADV071063
Ready For Installation
Catalog #
Type
Date
Project
Comments
Prepared by
DESIGN FEATURES
A
...
Housing
Die-stamped 20 gauge CRS with
white powder coat finish.
B
...
Pla ster Fra me
Housing is secured in plaster
frame with spring barbs and can
be adjusted in the plaster frame
to adjust for different ceiling
materials. The housing can be
removed from the plaster frame
to provide access to the junction
box. Galvanized steel
construction.
Plaster frame features include:
• Regressed locking screw for
securing hanger bars
• Cutouts for easily crimping
hanger bars in position
• Halo name embossed on
plaster frame
C
...
Junc tion Box
• Listed for through branch circuit
wiring
• Positioned to accommodate
straight conduit runs
• Seven 1/2" trade size conduit
knockouts with true pry-out
slots
• Slide-N-Side™ wire traps allow
non-metallic sheathed cable to
be installed without tools and
without removing knockouts.
Accepts a wider range of non-
metallic sheathed cable – the
standard cable types used in
lighting for both U.S. and
Canada.
- Allows wiring connections to
be made outside the junction
box
- Simply insert the cable directly
into the trap after connections
are made
- accommodates the following
standard non-metallic sheathed
cable types:
(US) #14/2, #14/3, #12/2, #12/3
(Canada) #14/2, #14/3, #12/2
D
...
GOT NAIL! Pa ss-N-Thru™
B a r Ha n g ers
Bar Hanger Features include:
• Pre-installed nail easily installs
in regular lumber, engineered
lumber and laminated beams
• Safety and guidance system
prevents snagging, ensures
smooth straight nail
penetration and allows bar
hangers to be easily removed if
necessary.
• Automatic levelling flange
aligns the housing and lets you
hold the housing in place with
one hand while driving nails
• Housing can be positioned at
any point within 24" joist span
• Score lines allow "tooless"
shortening for 12" joists
• Bar hangers may be
repositioned 90°
• Bar hangers do not need to be
removed from frame for
shortening
• Integral T-bar clips snaps onto
T-bars - no additional clips
required
E
...
Tra nsformer
Integral 120V-277V dual tap
magnetic transformer steps line
voltage down to lamp operating
voltage.
F
...
Therma l Protec tor
Self resetting thermal protector
deactivates fixture if overheating
occurs due to improper lamping
or misapplied insulation.
L abels
• UL/cUL Listed for Damp
Location
• UL/cUL listed for Feed
Through
• IP Rated