Specification

HALO
®
The Halo H25ICAT utilizes a 5"
aperture and is designed for
use in shallow ceilings where 2
x 6 joist construction is used.
The variety of trims available
allows a number of lighting
effects to be created with one
basic housing.
The H25ICAT is designed for
use in insulated shallow ceiling
applications and may be
completely covered in
insulation. The H25ICAT
housing is an AIR-TITE™
housing and meets Restricted
Air Flow requirements.
Housing
• Die-stamped 20 gauge
aluminum.
• Air-Tite gasket supplied with
housing to complete ATM-
E283 installation
• Spare 6-pack Air-Tite Gasket
available (GA-ATH5-6PK)
Plaster Frame
Galvanized steel construction.
The housing can be removed
from plaster frame to provide
access to the junction box.
Plaster frame features include:
• Regressed locking screw for
securing hanger bars
• Cutouts for easily crimping
hanger bars in position
• Halo name embossed on
plaster frame
Slide-N-Side™ Junction
box
• UL Listed for through branch
circuit wiring (maximum 8
No.12 ga., 90°C conductors).
• 1/2" trade size conduit
knockouts with true pry-out
slots positioned to
accommodate
straight conduit runs.
• Slide-N-Side™ wire traps
allow non-metallic sheathed
cable to be installed without
tools and without removing
knockouts. Accepts a wide
range of non-metallic
sheathed cable.
• Allows wiring connections to
be made outside the junction
box
• Simply insert the cable directly
into the trap after connections
are made.
• Accommodates the following
standard non-metallic
sheathed cable sizes:
(US) #14/2, #14/3, #12/2, #12/3
(Canada) #14/2, #14/3, #12/2
GOT NAIL! Pass-N-Thru™
Bar Hangers.
• Pre-installed nail easily installs
in regular lumber, engineered
lumber and laminated beams.
• Score lines allow "tooless"
shortening for 12" joists.
• Bar hangers can be
repositioned 90° on plaster
frame
• Safety and guidance system
prevents snagging, ensures
smooth straight nail
penetration
and allows bar hangers to be
easily removed if necessary.
• Automatic levelling flange
aligns the housing and lets
you hold the housing in place
with one hand while driving
nails.
• Housing can be positioned at
any point within 24" joist span
• Pass-N-Thru™ feature allows
bar hangers to be shortened
without removing from plaster
frame.
• Integral T-bar clip snaps onto T-
bars - no additional clips
required.
Socket
Porcelain socket with nickel
plated brass screw shell, snaps
into trim for consistent lamp
positioning. Shipping insert
protects socket from overspray.
Thermal Protector
Self resetting thermal protector
deactivates fixture if overheating
occurs due to improper lamping.
Trims
• Housing accommodates a wide
range of Halo 5" trims. Torsion
springs on all trims for quick and
easy installation.
• Fixed socket bracket aligns
socket for consistent lamp
position.
Labels
• UL/cUL listed
• Damp Location Listed
• UL/cUL listed for Feed Through
• UL/cUL listed for Direct Contact
with Insulation and combustible
material
Meets following requirements:
• Washington State Energy Code
• International Energy
Conservation Code (IECC)
• State of California Title 24 Low
Efficacy Luminaire IC and AT
requirement
• New York State Energy
Conservation Construction Code
• Certified under ASTM-E283 for
air tight construction.
B
A
E
D
C
F
H25ICAT
5" Insulated Ceiling
AIR-TITE™ Recessed
Housing
5" TRIMS
FOR USE IN
INSULATED
SHALLOW CEILINGS
FOR DIRECT CONTACT
WITH INSULATION
5 1/4"
[133mm]
1/2" [13mm]
5 1/2"
[140mm]
COOPER LIGHTING
7 1/4"
[184mm]
10 1/2"
[267mm]
Top View
Ordering Information on reverse
DESCRIPTION
The Halo H25ICAT utilizes a 5" aperture and is designed for use in
shallow ceilings where 2 x 6 joist construction is used. The variety
of trims available allows a number of lighting effects to be created
with one basic housing.
The H25ICAT is designed for use in insulated shallow ceiling
applications and may be completely covered in insulation. The
H25ICAT housing is an AIR-TITE™ housing and meets Restricted
Air Flow requirements.
ADV071158
6/07
FEATURES:
• SLIDE-N-SIDE III™ JUNCTION
BOX
• GOT NAIL!™ BAR HANGERS
• PASS-N-THRU™ BAR HANGERS
• REGRESSED LOCKING SCREW
• HALO ID ON PLASTER FRAME
with all trims listed
Catalog #
Type
Date
Project
Comments
Prepared by