Specification
ADV141507
6/17/2014
H750RICAT
6” Remodel
IC AIR-TITE™ Housing
For
Halo LED Modules and Trims
- ML56 Series
- RL56 Series
- RA56 Series
High Efficacy LED Housing
FOR USE IN
INSULATED CEILINGS
FOR DIRECT CONTACT
WITH INSULATION*
TO BE INSTALLED
FROM BELOW THE
CEILING
DESIGN FEATURES
HALO LED ICAT REMODEL HOUSING
The H750RICAT is a dedicated LED Remodel housing to be used
with designated Halo LED modules.The H750RICAT is designed
for remodel applications in insulated ceilings and can be in direct
contact with ceiling insulation*. This AIR-TITE™ housing design
prevents airflow between conditioned and unconditioned spaces
and saves on both heating and air conditioning costs. The LED
connector system provides High Efficacy code compliance when
used with designated HALO LED modules and trims.
Housing
Single wall aluminum housing.
Openings are gasketed for AIR-
TITE™ installation. Can be used
in 2”x 8” joist construction ( with
1/2” or 5/8” ceiling material).
Slide-N-Side™ Junction Box
• Seven 1/2” trade size conduit
knockouts with true pry-out
slots.
• Slide-N-Side™ wire traps allow
non-metallic sheathed cable to
be installed without tools and
without removing knockouts.
• Accepts a wider range of non-
metallic sheathed cable - the
standard cable types used
in lighting for both US and
Canada.
- Allows wiring connections to
be made outside the box.
- Simply insert the cable
directly into the trap after
connections are made.
- Accommodates the following
standard non-metallic
sheathed cable types.
(US) #14/2, #14/3, #12/2, #12/3
(Canada) #14/2, #14/3, #12/2
Remodel Springs
Four remodel clips secure
housing and accommodate 1/2”
and 5/8” ceiling material.
LED Module Connection
Halo LED modules simply install
with a plug-in 120V-277V rated
line voltage wiring connector(UL
and CSA Listed Luminaire
Disconnect). This non-screw-
base connection preserves the
high efficacy rating and prevents
use of low efficacy incandescent
sources.
Caution
Connection is rated for 120V
and 277V input. Installer must
verify LED module voltage is
compatible with the applicable
voltage input. If uncertain,
consult a qualified electrician.
Labels
• UL/cUL Listed 1598 Luminaire
• CE Marking - “Conformité
Européene” conformity with
the Council of European
Communities Directives,
meeting internationally
recognized compliance when
used with ML56 Series LED
modules
• Listed for Feed Through
• Listed for direct contact with
insulation and combustible
material*
• Listed for Damp Location
• Listed for Wet Location with
select trims
• Rated for 20W maximum
Qualification
May be used with qualified Halo
LED modules and designated
trims for High Efficacy Luminaire
Compliance:
• State of California Title 24
• International Energy
Conservation Code (IECC)
• Washington State Energy Code
• New York State Energy
Conservation Construction
Code - AIR-TITE™ Compliant
• Certified under ASTM-E283
standard for air-tight
construction
* Not to be used in direct contact with spray foam insulation.
Catalog #
Project
Comments
Prepared by
Type
Date
HALO
®
Can be used with
Qualified and compliant with
select trims. Refer to ENERGY
STAR
®
Qualified Products
List and CEC (T24) Appliance
Database for listings.
TOP VIEW
1/2" to 5/8"
[13mm to 15mm]
7"
[178mm]
Ceiling Opening to match
template supplied
6-1/4”
[159mm]
13-1/4"
[337mm]
6-7/8"
[175mm]