MicroEdge™ LED Direct Mount Collection HLB Direct Mount Downlight HLA Direct Mount Directional halolighting.
HALO™ HLB 1/2" colors 2 The SeleCCTable™ technology puts flexibility at your fingertips. By using the switch located on the driver junction box, the user can choose from a range of five color temperatures 2700K - 5000K. eaton.com/lighting halolighting.
ultra-thin The HLB is an ultra-thin LED lens downlight with a remote driver / junction box ideal for new construction and renovation work. Simplified installation in drywall or suspended ceilings eliminates recessed cans saving time and money. The HLB can install from below the ceiling in as little as a 1-1/2” plenum height and can be used in direct contact with insulation and is airtight.
installs virtually anywhere The HLB installs into a standard hole saw size cutout and is retained securely in place with springs. The driver junction box installs through a cutout and can be positioned remotely from the fixture fitting. Mounting holes facilitate attachment to the building structure. New Construction Mounting Frame The new construction mounting frame locates the fixture fitting during electrical rough-in.
1 2 3 4 Square Installation 1 2 3 halolighting.
HLB3 • • • • • • • • Up to 550 lumens Use to replace 40W A19 incandescent lamp 2700K, 3000K, 3500K, 4000K fixed CCT 90 CRI 9W, 120V L70 @ 50,000 hrs HALO matte white finish No existing recessed housing or junction box required • • • • • • Fixture will not fit into existing housings or junction boxes Wet location listed (shower rated) covered ceiling Rated for direct contact to air permeable insulation AIR-TITE™ certified per ASTM-E283 Textured lens provides smooth light distribution Five-year limited wa
3.12” [79.3mm] cutout 4.19” [106.3mm] 1.07” [27.1mm] .45” [11.4mm] .10” [2.5mm] Ø 2.21” [56.1mm] 3.58” [91mm] 4.83” [122.6mm] 10” [254mm] wire length 2.87” [72.92mm] 1.66” [42.15mm] 6.5” [165mm] Driver Finish Packaging 1E = 120V 60Hz, LE & TE phase cut 5% dimming MW = matte white flange R = recyclable 4-color unit carton suitable for point of purchase merchandizing display Extension Cable | Dedicated Driver/Jbox HLB06EC - 6 ft. extension cable HLB12EC - 12 ft. extension cable HLB20EC - 20 ft.
HLB3S • • • • • • • • Up to 550 lumens Use to replace 40W A19 incandescent lamp 2700K, 3000K, 3500K, 4000K fixed CCT 90 CRI 9W, 120V L70 @ 50,000 hrs HALO matte white finish No existing recessed housing or junction box required • • • • • • Fixture will not fit into existing housings or junction boxes Wet location listed (shower rated) covered ceiling Rated for direct contact to air permeable insulation AIR-TITE™ certified per ASTM-E283 Textured lens provides smooth light distribution Five-year limited w
3.12” [79.3mm] cutout 4.19” [106.3mm] 1.12” [28.5mm] .45” [11.4mm] .10” [2.5mm] Ø 2.21” [56.1mm] 3.59” [91mm] 4.83” [122.6mm] 10” [254mm] wire length 2.87” [72.92mm] 1.66” [42.15mm] 6.5” [165mm] Driver Finish Packaging 1E = 120V 60Hz, LE & TE phase cut 5% dimming MW = matte white flange R = recyclable 4-color unit carton suitable for point of purchase merchandizing display Extension Cable | Dedicated Driver/Jbox HLB06EC - 6 ft. extension cable HLB12EC - 12 ft. extension cable HLB20EC - 20 ft.
HLB4 Up to 750 lumens Use to replace 60W A19 incandescent lamp 2700K, 3000K, 3500K, 4000K, 5000K CCT field select 3000K, 4000K fixed CCT 90 CRI 12W, 120V L70 @ 50,000 hrs HALO matte white finish No existing recessed housing or junction box required • • • • • • • • • • • • • • • Fixture will not fit into existing housings or junction boxes Wet location listed (shower rated) covered ceiling Rated for direct contact to air permeable insulation AIR-TITE™ certified per ASTM-E283 Textured lens provides smooth
.43” [10.9mm] 4.18” [106.3mm] Ø 3.10” [78.71mm] .12” [3.05mm] 4.73” [120.02mm] 4-1/4” [107.95mm] cutout 3.87” [98.2mm] wire length 2.86” [72.74mm] 1.66” [42.15mm] 6.42” [163mm] (HLB4069FS1EMW only) 4.92” [125mm] Ø.20” [5mm] 5.7” [144.5mm] Ø.47” [12mm] 10” [254mm] wire length 3.16” [80.29mm] 1.66” [42.15mm] 6.
HLB4S Up to 700 lumens Use to replace 60W A19 incandescent lamp 2700K, 3000K, 3500K, 4000K, 5000K CCT field select 3000K, 4000K fixed CCT 90 CRI 12W, 120V L70 @ 50,000 hrs HALO matte white finish No existing recessed housing or junction box required • • • • • • • • • • • • • • • Fixture will not fit into existing housings or junction boxes Wet location listed (shower rated) covered ceiling Rated for direct contact to air permeable insulation AIR-TITE™ certified per ASTM-E283 Textured lens provides smo
1.25” [33.7mm] .12” [3.05mm] 4.72” [120mm] 4.18” [106.3mm] 4.18” [106mm] cutout 10” [254mm] wire length 3.16” [80.29mm] 1.66” [42.15mm] 6.5” [165mm] Driver Finish Packaging 1E = 120V 60Hz, LE & TE phase cut 5% dimming MW = matte white flange R = recyclable 4-color unit carton suitable for point of purchase merchandizing display Extension Cable | Dedicated Driver/Jbox HLB06EC - 6 ft. extension cable HLB12EC - 12 ft. extension cable HLB20EC - 20 ft.
HLB6 Up to 1100 lumens Use to replace 75W A19 incandescent lamp 2700K, 3000K, 3500K, 4000K, 5000K CCT field select 3000K, 4000K fixed CCT 90 CRI 16W, 120V L70 @ 50,000 hrs HALO matte white finish No existing recessed housing or junction box required • • • • • • • • • • • • • • • Fixture will not fit into existing housings or junction boxes Wet location listed (shower rated) covered ceiling Rated for direct contact to air permeable insulation AIR-TITE™ certified per ASTM-E283 Textured lens provides sm
6-1/8” [155.58mm] cutout 4.18” [106.3mm] .47” [11.9mm] .12” [3.05mm] Ø 5.02” [127.6mm] 6.7” [170.07mm] 3.87” [98.2mm] wire length 2.86” [72.74mm] 1.66” [42.15mm] 6.42” [163mm] 4.92” [125mm] Ø.20” [5mm] 5.7” [144.5mm] (HLB6099FS1EMW only) Ø.47” [12mm] 10” [254mm] wire length 3.16” [80.29mm] 1.66” [42.15mm] 6.
HLB6S Up to 1100 lumens Use to replace 75W A19 incandescent lamp 2700K, 3000K, 3500K, 4000K, 5000K CCT 3000K, 4000K fixed CCT 90 CRI 16W, 120V L70 @ 50,000 hrs HALO matte white finish No existing recessed housing or junction box required • • • • • • • • • • • • • • • Fixture will not fit into existing housings or junction boxes Wet location listed (shower rated) covered ceiling Rated for direct contact to air permeable insulation AIR-TITE™ certified per ASTM-E283 Textured lens provides smooth light d
4.18” [106.3mm] 6-1/8” [155.58mm] cutout 1.25” [33.7mm] 6.7” [170mm] .12” [3.05mm] 10” [254mm] wire length 3.16” [80.29mm] 1.66” [42.15mm] 6.5” [165mm] Driver Finish Packaging 1E = 120V 60Hz, LE & TE phase cut 5% dimming MW = matte white flange R = recyclable 4-color unit carton suitable for point of purchase merchandizing display Extension Cable | Dedicated Driver/Jbox HLB06EC - 6 ft. extension cable HLB12EC - 12 ft. extension cable HLB20EC - 20 ft.
HLA4 Up to 700 lumens Use to replace 60W A19 incandescent lamp 2700K, 3000K, 3500K, 4000K, 5000K CCT field select 90 CRI 12W, 120V L70 @ 50,000 hrs HALO matte white finish No existing recessed housing or junction box required • • • • • • • • • • • • • Fixture will not fit into existing housings or junction boxes Wet location listed (shower rated) covered ceiling Rated for direct contact to air permeable insulation AIR-TITE™ certified per ASTM-E283 Five-year limited warranty Refer to ENERGY STAR® Certif
1.34” [34.15mm] 1.94” [49.39mm] .5” [12.7mm] .1” [2.54mm] 3.1” [78.74mm] 4.19” [106.36mm] 4.73” [120.09mm] 30º 4.188” [106.36mm] 4.728” [120.09mm] 10” [254mm] wire length 3.16” [80.29mm] 1.66” [42.15mm] 6.5” [165mm] Driver Finish Packaging 1E = 120V 60Hz, LE & TE phase cut 5% dimming MW = matte white flange R = recyclable 4-color unit carton suitable for point of purchase merchandizing display Mounting Frame HL4RSMF = 4” round and square mounting frame Extension Cables HLB06FSEC - 6 ft.
HLA4S Up to 700 lumens Use to replace 60W A19 incandescent lamp 2700K, 3000K, 3500K, 4000K, 5000K CCT field select 90 CRI 12W, 120V L70 @ 50,000 hrs HALO matte white finish No existing recessed housing or junction box required • • • • • • • • • • • • • Fixture will not fit into existing housings or junction boxes Wet location listed (shower rated) covered ceiling Rated for direct contact to air permeable insulation AIR-TITE™ certified per ASTM-E283 Five-year limited warranty Refer to ENERGY STAR® Certi
1.34” [34.15mm] 1.94” [49.39mm] .5” [12.7mm] .1” [2.54mm] 3.1” [78.74mm] 4.19” [106.36mm] 4.73” [120.09mm] 30º 4.188” [106.36mm] 4.728” [120.09mm] 10” [254mm] wire length 3.16” [80.29mm] 1.66” [42.15mm] 6.5” [165mm] Driver Finish Packaging 1E = 120V 60Hz, LE & TE phase cut 5% dimming MW = matte white flange R = recyclable 4-color unit carton suitable for point of purchase merchandizing display Mounting Frame HL4RSMF = 4” round and square mounting frame Extension Cables HLB06FSEC - 6 ft.
Accessories Decorative Overlay 3” Round HLB3RTRMMW = matte white HLB3RTRMSN = satin nickel HLB3RTRMTBZ = tuscan bronze 3” Square HLB3STRMMW = matte white HLB3STRMSN = satin nickel HLB3STRMTBZ = tuscan bronze 4” Round HLB4RTRMMW = matte white HLB4RTRMSN = satin nickel HLB4RTRMTBZ = tuscan bronze 4” Square HLB4STRMMW = matte white HLB4STRMSN = satin nickel HLB4STRMTBZ = tuscan bronze 4” Square Adjustable HLA4STRMMW = matte white HLA4STRMSN = satin nickel HLA4STRMTBZ = tuscan bronze 6” Round HLB6RTRMMW =
Mounting Frames HL4RSMF - 4” round and square mounting frame HL6RSMF - 6” round and square mounting frame During electrical rough-in, the HLB driver / junction box attaches to the mounting frame with captive fasteners meeting code requirements for attachment to the building structure. Rounded corners break away to allow installation of square fixtures. halolighting.
Product and Photometric Data HLB305930EMWR HLB3 3000K 3in HLB CCT Lumens Power (W) LPW 2700K 557 9 61.9 3000K 577 9 64.1 3500K 556 9 61.8 4000K 583 9 64.8 HLB305930EMW-3000K Luminaire lumens 557 Input watts 9 LER (LPW) 61.89 Spacing Criteria 0-180 1.31 90-270 1.31 Diagonal 1.4 Beam angle (degrees) 111.4 Field angle (degrees) 162.3 Zonal lumen Lumens 0-30 154.3 27.7 0-40 305.2 54.8 0-60 445.6 80 0-90 557.
HLB3S05930EMWR HLB3S 3000K 3in HLB CCT Lumens Power (W) LPW 2700K 574 9 63.8 3000K 553 9 64.1 3500K 562 9 62.4 4000K 573 9 63.7 HLB3S05930EMW-3000K Luminaire lumens 553 Input watts 9 LER (LPW) 61.44 Spacing Criteria 0-180 1.39 90-270 1.26 Diagonal 1.4 Beam angle (degrees) 107.3 Field angle (degrees) 161.5 Zonal lumen Lumens 0-30 151.5 27.4 0-40 251.1 45.4 0-60 441.3 79.8 0-90 553.
Product and Photometric Data HLB4069FS1EMWR HLB4 SeleCCTable 4in HLB CCT Lumens Power (W) LPW 2700K 720.0 12 60.0 3000K 723.0 12 60.3 3500K 735.2 12 61.3 4000K 746.1 12 62.2 5000K 751.9 12 62.7 HLB4069FS1EMWR-3000K Input watts 12 LER (LPW) 60.3 Spacing Color Metric Summary-3000K 723 Luminaire lumens 0-180 1.28 TM-30-15 90-270 1.28 Diagonal 1.39 Beam angle (degrees) 110.2 254 Field angle (degrees) 160 Criteria CRI/CIE Lumens 191 % Lumens 0-30 203 28.
HLB4S069FS1EMWR HLB4S SeleCCTable 4in HLBS CCT Lumens Power (W) LPW 2700K 684.9 10.1 67.8 3000K 695.9 10.1 68.9 3500K 689.6 10.1 68.3 4000K 693.7 10.1 68.7 5000K 694.6 10.1 68.8 HLB4S069FS1EMW-3000K Color Metric Summary-3000K 696 Luminaire lumens Input watts 10.1 LER (LPW) 68.9 Spacing 0-180 1.30 90-270 1.32 Diagonal 1.40 Beam angle (degrees) 110.3 Criteria 180° 170° 170° Field angle (degrees) 249 160° 150° CRI/CIE Lumens 196 130° 28.1 321 46.
Product and Photometric Data HLB6099FS1EMWR HLB6 SeleCCTable 6in HLB CCT Lumens Power (W) LPW 2700K 1037.3 16 64.8 3000K 1061.0 16 66.3 3500K 1078.9 16 67.4 4000K 1094.9 16 68.4 5000K 1103.4 16 69.0 HLB6099FS1EMWR-3000K Input watts 16 LER (LPW) 66.3 Spacing Color Metric Summary-3000K 1061 Luminaire lumens 0-180 1.31 TM-30-15 90-270 1.31 Diagonal 1.41 Beam angle (degrees) 112.2 364 Field angle (degrees) 161.
HLB6S099FS1EMWR HLB6S SeleCCTable 6in HLBS CCT Lumens Power (W) LPW 2700K 954 13.7 69.6 3000K 975 13.7 71.1 3500K 1002 13.7 73.2 4000K 1012 13.7 73.9 5000K 1009 13.7 73.6 HLB6S099FS1EMW-3000K Color Metric Summary-3000K Luminaire lumens 975 Input watts 13.7 LER (LPW) 71.2 Spacing 0-180 1.22 90-270 1.30 Diagonal 1.38 Beam angle (degrees) 110.
Product and Photometric Data HLA4 SeleCCTable 4in HLA CCT Lumens Power (W) LPW 2700K 704 10.1 69.7 3000K 670 10.1 66.4 3500K 673 10.1 66.6 4000K 671 10.1 66.4 5000K 656 10.1 65.0 HLA406VWFL9FS1EMWR Luminaire lumens 670 Input watts 10.1 LER (LPW) 66.34 Spacing 0-180 TM-30-15 1.18 90-270 1.18 Diagonal 1.28 Beam angle (degrees) 96.6 Field angle (degrees) 156.7 Criteria Color Metric Summary-3000K Zonal lumen Lumens % Lumens 0-30 238.1 35.53 0-40 361.4 53.
Lighting Control Solution HALO Home In-wall Smart Dimmer HIWMA1BLE40AWH Controls standard lighting fixtures with dimmer or HALO Home mobile app. Features include: • ON/OFF • Dim • Group • Scene • Schedule Eaton dimmers offer versatile options to set the mood and reduce energy consumption. These compatible LED dimmers are ideal for both residential and light commercial applications and are compatible with decorator (screw-less) style devices and wallplates. Refer to www.eaton.
Eaton 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 www.eaton.
