Dimensions Guide

HLB4S Series
Cooper Lighting Solutions
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
© 2020 Cooper Lighting Solutions
All Rights Reserved.
Specifications and dimensions
subject to change without notice.
PS518051EN page 3
January 28, 2020 2:15 PM
Product Specications
Housing
• Die cast aluminum mounting frame with integral
ange provides passive thermal cooling achieving
L70 at 50,000 hours in IC and non-IC applications
• High impact diffuse lens provides shielding to the
light guide minimizing pixilation.
Gasket
• Closed cell gasket achieves restrictive airow and
wet location listing without additional gaskets or
caulking
Optics
• Precision acrylic light guide organizes source ux
into wide distribution with 1.4 spacing criteria, useful
for general area illumination
LED Array
• Plurality of mid power LED’s provides a uniform
source with high eciency and long life
• Available in 90 CRI minimum, R9 greater than 50
provides high color rendering
• Fixed 3000 and 4000 K CCT color temperatures,
color accuracy within 3 SDCM
• Optional eld selectable color temperature, select
2700, 3000, 3500, 4000 or 5000 K CCT, color
accuracy within 4 SDCM
• Meets Energy Star color angular uniformity
requirements, deviation is less than 0.006 u’ v’
Remote Driver / Junction Box
• Die formed metal driver / junction box with captive
hinged junction box cover
• Listed for (6) #12 AWG 90˚ C splice conductors, 2-in,
2-out plus (2) ground
• (2) ½” conduit pry-outs
• (2) Slide-N-Side™ non-metallic (NM) wire traps
allows wiring outside the box
• Accepts 14-2, 14-3, 12-2, 12-3 U.S. and 14-2, 14-3,
12-2 Canadian NM cable
• (3) 4-port push wire nuts with clear caps for quick
and reliable mains voltage connections
• Integral mounting facilitate direct mounting to
building structure or mounting frame
Driver
• 120V 60 Hz constant current driver provides noise
free operation
• Continuous, icker-free dimming from 100% to 5%
with select leading or trailing edge 120V phase cut
dimmers
• Plenum rated inline electrical quick connect provides
low voltage connection to xture tting, CMP/FT6
rated
Installation
• Can be installed in 1/2” to 1-1/4” thick ceilings
• Cutout template provided
• Heat treated springs hold xture tting securely in
the ceiling eliminating light leaks
• Housing is less than ½” thick and can span a 2”
nominal framing member
• Can be removed from below the ceiling for service
or replacement
Compliance
• cULus certied type IC suitable for direct contact
with air permeable insulation
• Not recommended for use in direct contact with
spray foam insulation, reference NEMA LSD57-2013
• Wet location listed and IP44 ingress protection
• Airtight per ASTM-E283-04
• Suitable for use in clothes closets when installed
in accordance with the NEC 410.16 spacing
requirements
• EMI/RFI emissions per FCC 47CFR Part 15
consumer limits
• Contains no mercury or lead and RoHS compliant
• Photometric testing in accordance with IES LM-79-
08
• Lumen maintenance projections in accordance with
IES LM-80-08 and TM-21-11
• Can be used for State of California Title 24 high
ecacy LED compliance under JA8, reference
Modernized Appliance Eciency Database System
(MAEDBS) for 2016 JA8 High Ecacy Lighting
• ENERGY STAR® certied, reference “Certied Light
Fixtures” database
Warranty
• Five-year limited warranty
Energy Data
Lumens 600 Series
Input Voltage 120V
Input Current 90 (mA)
Input Power 10.5 (W)
Eciency 60 (LPW)
Inrush (A) 2.2 A @ 42mS
THD ≤ 20%
PF ≥ 0.90
T Ambient -30° - +40°C
Sound Rating ≤ 22 dba