Dimensions Guide

HLB4SP
PS518051EN page 2
November 10, 2019 10:22 AM
Product Specications
Housing
• Die cast aluminum mounting frame with integral
ange provides passive thermal cooling achieving
L70 at 50,000 hours in IC and non-IC applications
• High impact diffuse lens provides shielding to the
light guide minimizing pixilation
Gasket
• Closed cell gasket achieves restrictive airow and
wet location listing without additional gaskets or
caulking
Optics
• Acrylic lens organizes source ux into wide
distribution with 1.16 spacing criteria, useful for
general area illumination
LED Array
• Plurality of mid power LED’s provides a uniform
source with high eciency and long life
• Available in 90 CRI minimum, R9 greater than 50
provides high color rendering
• Fixed 3000K and 4000K CCT color temperatures,
color accuracy within 3 SDCM
• Optional eld selectable color temperature, select
2700K, 3000K, 3500K, 4000K or 5000K CCT, color
accuracy within 4 SDCM
• Meets ENERGY STAR
®
color angular uniformity
requirements, deviation is less than 0.006 u’ v’
Remote Driver / Junction Box
• Die formed metal driver / junction box with captive
hinged junction box cover
• Listed for (6) #12 AWG 90˚ C splice conductors,
2-in, 2-out plus (2) ground
• (2) ½” conduit pry-outs
• (2) Slide-N-Side™ non-metallic (NM) wire traps
allows wiring outside the box
• Accepts 14-2, 14-3, 12-2, 12-3 U.S. and 14-2, 14-3,
12-2 Canadian NM cable
• (3) 4-port push wire nuts with clear caps for quick
and reliable mains voltage connections
• Integral mounting facilitate direct mounting to
building structure or mounting frame
Driver
• 120V 60 Hz constant current driver provides noise
free operation
• Continuous, icker-free dimming from 100% to 5%
with select leading or trailing edge 120V phase
cut dimmers • Plenum rated inline electrical quick
connect provides low voltage connection to xture
tting, CMP/FT6 rated
Installation
• Can be installed in 1/2” to 1-1/4” thick ceilings
• Round ceiling cutout
• Heat treated springs hold xture tting securely in
the ceiling eliminating light leaks
• Housing is less than ½” thick and can span a 2”
nominal framing member
• Can be removed from below the ceiling for service
or replacement
Compliance
• cULus certied type IC suitable for direct contact
with air permeable insulation
• Not recommended for use in direct contact with
spray foam insulation, reference NEMA LSD57-2013
• Wet location listed and IP44 ingress protection
• Airtight per ASTM-E283-04
• Suitable for use in clothes closets when installed
in accordance with the NEC 410.16 spacing
requirements
• EMI/RFI emissions per FCC 47CFR Part 15
consumer limits
• Contains no mercury or lead and RoHS compliant
• Photometric testing in accordance with IES LM-
79-08
• Lumen maintenance projections in accordance with
IES LM-80-08 and TM-21-11
• Can be used for State of California Title 24 high
ecacy LED compliance under JA8, reference
Modernized Appliance Eciency Database System
(MAEDBS) for 2016 JA8 High Ecacy Lighting
• ENERGY STAR® certied, reference “Certied Light
Fixtures” database
Warranty
• Five year warranty standard.
Order Information
SAMPLE ORDER NUMBER: HLB4SP069FS1EMWR
Models
Lumens CRI / CCT Driver Finish Packaging
Models Lumens CRI / CCT Driver Finish Packaging
HLB4SP = 4-Inch LED Square lens
round ceiling cutout downlight with
remote driver / junction box
06 = 600 lumens
(nominal)
930 = 90 CRI minimum, 3000K CCT
940 = 90 CRI minimum, 4000K CCT
9FS = 90 CRI minimum, eld selectable
2700K, 3000K, 3500K, 4000K or 5000K CCT
1E = 120V 60Hz, LE & TE phase
cut 5% dimming
MW = matte white ange R = recyclable 4-color unit carton
suitable for point of purchase
merchandising display
Notes Notes Notes Notes Notes Notes
Accessories
Accessories
HLB4SOTMW = 4” square oversized trim, matte white
HL4NCMF = 4” new construction mounting frame
Designer Trims
HLB4SPTRMMW = 4” square pin decorative overlay, matte white
HLB4SPTRMSN = 4” square pin decorative overlay, satin nickel
HLB4SPTRMTBZ = 4” square pin decorative overlay, tuscan bronze
Extension Cable | Dedicated Driver/Jbox
HLB06EC = 6 ft. extension cable
HLB12EC = 12 ft. extension cable
HLB20EC = 20 ft. extension cable
Extension Cable | seleCCTable Driver/Jbox
HLB06FSEC = 6 ft. extension cable
HLB12FSEC = 12 ft. extension cable
HLB20FSEC = 20 ft. extension cable
Notes
Icon Key: ∆ Congurable Product