Installation Guide

ManualsBrandsHALO ManualsLighting6 in. Selectable White Round New Construction/Remodel Recessed Integrated LED Direct Mount Downlight Kit

HLB-3”, HLB-4” and HLB-6” Series Instructions

Instructions pour les séries HLB-3”, HLB-4” et HLB-6”

Instrucciones para las series HLB-3”, HLB-4” y HLB-6”

Packaging Contents / Contenu de l’emballage / Contenidos del embalaje

ITEMS REQUIRED

(Purchase separately)

• Gloves

ARTICLES NÉCESSAIRES

(à acheter séparément)

• Gants

ARTÍCULOS NECESARIOS

(se compran por separado)

• Guantes

D. J-Box, dedicated, 4” and 6”

Boîte de Jonction, dédié, 4” y 6”

Caja de Conexiones, dedicado, 4” et 6”

C. J-Box, dedicated, 3”

Boîte de Jonction, dédié, 3”

Caja de Conexiones, dedicado, 3”

E. J-Box, selectable, 4” and 6”

Boîte de Jonction, sélectionnable, 4” y 6”

Caja de Conexiones, seleccionable, 4” et 6”

Selector Switch (2700K, 3000K, 3500K, 4000K, 5000K)

Choose your favorite correlated color temperature (CCT) from 5

options using the switch

Sélecteur (2700K, 3000K, 3500K, 4000K, 5000K)

Choisissez votre température de couleur corréléé préféréé (CCT) de

5 options en utilisant le commutateur.

Interruptor selector (2700K, 3000K, 3500K, 4000K, 5000K)

Elija su temperatura favorita de color correlacionada (CCT) de

5 opciones utilizando el interruptor.

A. HLB and connector, round

HLB y conector, rond

HLB et connecteur, redondo

B. HLB and connector, square

HLB y conector, carré

HLB et connecteur, cuadrado

INS #

IB518193ML

Summary of content (7 pages)

PAGE 1
INS # IB518193ML HLB-3”, HLB-4” and HLB-6” Series Instructions Instructions pour les séries HLB-3”, HLB-4” et HLB-6” Instrucciones para las series HLB-3”, HLB-4” y HLB-6” Packaging Contents / Contenu de l’emballage / Contenidos del embalaje A. HLB and connector, round HLB y conector, rond HLB et connecteur, redondo C. J-Box, dedicated, 3” Boîte de Jonction, dédié, 3” Caja de Conexiones, dedicado, 3” B. HLB and connector, square HLB y conector, carré HLB et connecteur, cuadrado D.
PAGE 2
IB518193ML IMPORTANT SAFETY INSTRUCTIONS When using product, basic precautions should always be followed, including the following: • Heed all warnings, including below warnings AND those included on product. • HALO® recessed luminaires (fixtures) are designed to meet the latest NEC requirements and are certified in full compliance with UL. Before attempting installation of any recessed lighting luminaire check your local electrical code.
PAGE 3
IB518193ML • Only those open holes indicated in the photographs and /or drawings may be made or altered as a result of kit installation. Do not leave any other open holes in an enclosure of wiring or electrical components. • • • • Raccorder l’appareil d’éclairage à une alimentation 120 V, 60 Hz. Toute autre connexion annule la garantie. L’appareil d’éclairage doit être installé par un électricien ou une personne chevronnée en câblage domestique.
PAGE 4
IB518193ML MOUNTING 1. Connect the remote driver box to the light fixture. (Fig. 2) 2. Place remote driver box thru the cut-out hole and mount according to local code as required. 3. Bundle any excess wire and place into ceiling above the module according to local code as required. 4. Rotate both mousetrap springs upward to allow passage through the cutout in the ceiling (Fig.3). 5.
PAGE 5
IB518193ML A purchaser’s receipt or other proof of date of original purchase acceptable to Eaton. This is required before warranty performance shall be rendered. This warranty does not apply to Eaton products that have been altered or repaired or that have been subjected to neglect, abuse, misuse or accident (including shipping damages). This warranty does not apply to products not manufactured by Eaton which have been supplied, installed, and/or used in conjunction with Eaton products.
PAGE 6
HLB3, HLB4 and HLB6 Round Ceiling Templates Modèles de plafond rond HLB3, HLB4 et HLB6 Plantillas de techo redondo HLB3, HLB4 y HLB6 6-1/8” [155.6mm] 3-1/4” [82.6mm] 4-3/16” [106.
PAGE 7
HLB3, HLB4 and HLB6 Square Ceiling Templates Modèles de plafond carré HLB3, HLB4 et HLB6 Plantillas de techo cuadrado HLB3, HLB4 y HLB6 6-1/8” [155.6mm] 4-3/16” [106.4mm] 3-1/4” [82.