Installation Guide

ManualsBrandsHalo ManualsLightingHLBSL 6 in. Color Selectable New Construction or Remodel Canless Recessed Integrated LED Kit

HLBSL-4 & HLBSL-6 Series Instructions

Instructions pour les séries HLBSL-4 et HLBSL-6

Instrucciones para las series HLBSL-4 y HLBSL-6

Packaging Contents / Contenu de l’emballage / Contenidos del embalaje

B. J-Box, selectable, 4” and 6”

Boîte de Jonction, sélectionnable, 4” y 6”

Caja de Conexiones, seleccionable, 4” et 6”

Selector Switch (2700K, 3000K, 3500K, 4000K, 5000K, 6000K)

Choose your favorite correlated color temperature (CCT) from 6 options using

the switch (depending on the model).

Sélecteur (2700K, 3000K, 3500K, 4000K, 5000K, 6000K)

Choisissez votre température de couleur corréléé préféréé (CCT) de 6 options

en utilisant le commutateur (selon le modèle).

Interruptor selector (2700K, 3000K, 3500K, 4000K, 5000K, 6000K)

Elija su temperatura favorita de color correlacionada (CCT) de 6 opciones

utilizando el interruptor (dependiendo del modelo).

A. HLBSL and connector, round

HLBSL y conector, rond

HLBSL et connecteur, redondo

INS #

IB518226ML

ITEMS REQUIRED

(Purchase separately)

• Gloves

• Ladder

• Hole Saw

ARTICLES NÉCESSAIRES

(à acheter séparément)

• Gants

• Échelle

• Scie-cloche

ARTÍCULOS NECESARIOS

(se compran por separado)

• Guantes

• Escalera

• Sierra perforadora

Summary of content (7 pages)

PAGE 1
INS # IB518226ML HLBSL-4 & HLBSL-6 Series Instructions Instructions pour les séries HLBSL-4 et HLBSL-6 Instrucciones para las series HLBSL-4 y HLBSL-6 Packaging Contents / Contenu de l’emballage / Contenidos del embalaje A. HLBSL and connector, round HLBSL y conector, rond HLBSL et connecteur, redondo B.
PAGE 2
IB518226ML IMPORTANT SAFETY INSTRUCTIONS When using product, basic precautions should always be followed, including the following: • Heed all warnings, including below warnings AND those included on product. • HALO® recessed luminaires (fixtures) are designed to meet the latest NEC requirements and are certified in full compliance with UL. Before attempting installation of any recessed lighting luminaire check your local electrical code.
PAGE 3
IB518226ML • Only those open holes indicated in the photographs and /or drawings may be made or altered as a result of kit installation. Do not leave any other open holes in an enclosure of wiring or electrical components. • • • • Raccorder l’appareil d’éclairage à une alimentation 120 V, 60 Hz. Toute autre connexion annule la garantie. L’appareil d’éclairage doit être installé par un électricien ou une personne chevronnée en câblage domestique.
PAGE 4
IB518226ML MOUNTING 1. Connect the remote driver box to the light fixture. (Fig. 2) 2. Place remote driver box thru the cut-out hole and mount according to local code as required. 3. Bundle any excess wire and place into ceiling above the module according to local code as required. 4. Rotate both mousetrap springs upward to allow passage through the cutout in the ceiling (Fig.3). 5.
PAGE 5
IB518226ML REMOVAL RETRAIT Risk of pinching Do not place hands under springs during removal of the LED module. 1. Simply pull down firmly on LED module until mousetrap springs release from the ceiling. Reach through the ceiling to hold mousetrap springs up and away from the ceiling as you continue to pull the module from it’s opening. 2. Disconnect wiring.
PAGE 6
IB518226ML Cooper Lighting Solutions is not responsible for merchandise damaged in transit. Repaired or replaced products shall be subject to the terms of this warranty and are inspected when packed. Evident or concealed damage that is made in transit should be reported at once to the carrier making the delivery and a claim filed with them. Reproductions of this document without prior written approval of Cooper Lighting Solutions are strictly prohibited. LA RÉCLAMATION AU TITRE DE LA PRÉSENTE GARANTIE.
PAGE 7
HLBSL-4 & HLBSL-6 Round Ceiling Templates Modèles de plafond rond HLBSL-4 et HLBSL-6 Plantillas de techo redondo HLBSL-4 y HLBSL-6 6-1/8” [155.6mm] 4-3/16” [106.