RECESSED LIGHTING SMART LIGHTING | HOUSINGS | TRIMS | LED MODULES
Table of Contents LED Product Overviews ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 1 Halo Recessed Housings ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 8 Halo Recessed Trims ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 16 Compliances & Listings ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 20 Lighting Properties ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 21 Lighting Effects ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 23 Light Sou
HALO Recessed Lighting Smart Lighting solutions for the whole home ® HALO Home Collection HALO Home is a flexible new approach to smart home lighting. Our system offers a range of Bluetooth fixtures, controls and accessories that work seamlessly together. From a single light to an entire home, your smart lighting search starts and ends here.
Halo Recessed Lighting LED Products ML56 Collection ML4 Collection Halo ML56 LED downlight collection is comprised of LED modules with 5" and 6" trims. ML56 LED modules are offered in three lumen packages across the 600, 900, and 1200 Series - a versatile collection of energy-efficient LED downlights for general lighting in commercial and residential applications.
Halo Recessed Lighting LED Products RL Collection RA Collection Halo RL series is a complete 4" and 5"/6" LED baffle-trim module for recessed downlights. The RL series is designed for use in new construction, remodel and retrofit installation in Halo and other compatible 4", 5" and 6" recessed downlight housings. The integral LED driver offers 120 volt dimming capability. RL4 is offered in 600 lumen, and 600 and 900 lumens on the field selectable. RL56 is offered in 600, 900 and 1200 lumen series.
Halo Recessed Lighting LED Products HL6 AllSlope Collection SLD Collection Featuring unique interchangeable beam-forming optics, full range dimming and multiple color temperatures and trim options, the Halo HL6 AllSlope LED 6" downlight system is specifically designed for slope ceiling applications with pitch aiming from 2/12 (10 degrees) to 12/12 (45 degrees).
Halo Recessed Lighting LED Products MicroEdge™ - HLB/HLA Collection HL3 Collection The MicroEdge series is made up of the HLB ultra-thin LED lens downlight and HLA adjustable. Both are powered by a remote driver / junction box ideal for new construction and renovation work. Simplified installation in drywall or suspended ceilings eliminates recessed cans saving time and money.
Halo Recessed Lighting LED Products E44 Collection SMD Collection A family of 4-inch housings and trims optimized for use with LED lamps delivering longer life and energy savings. The ultra-shallow housings are available in new construction and remodel types suitable for 2x4 framing or shallow plenum installation. The compact plaster frame with repositionable junction box fits in tight spacing.
Halo Recessed Lighting SeleCCTable Products 2700K 3000K 3500K 4000K 5000K The SeleCCTable technology puts flexibility at your customers fingertips by allowing them to choose from a range of color temperatures 2700K-5000K and adjust with the switch located on the fixture allowing you to complete jobs faster and with fewer callbacks.
Halo Recessed Lighting Types of Housings Insulated Ceiling (IC) Insulated Ceiling type (IC) rated luminaires are tested to UL 1598 standards for installation with blown-in or batting-type dry insulation materials. This allows the insulation layer to remain unbroken and prevent heating and air conditioning losses. These housings are also equipped with thermal protectors to guard against overlamping by cycling the lamp off and on until the problem is corrected.
Halo Recessed Lighting Types of Housings Small Aperture - 3" and 4" Small aperture 3" and 4" housings are well suited for task and accent lighting especially over counters and in display areas. And 4" housings are increasingly used for general lighting with a trim providing for wide beam distribution, in conjunction with an appropriate lighting layout. Small aperture housings are available in Insulated Ceiling (IC), Non-Insulated Ceiling (T) / (Non-IC), and Air-Tite (AT) models.
Halo Recessed Lighting H3 (3"), H99/H1499 & H4 (4") Housing Installation Features 1 10 3 4 New Construction 1 2 5 4" Remodel 8A 4 10 6A 3" Remodel 5 7 6B 9 10 4 5 10 HALO Halo Recessed Catalog - LED Recessed Downlighting 8B Specifications, compliances and dimensions subject to change without notice
Halo Recessed Lighting H3 (3"), H99/H1499 & H4 (4") Housing Installation Features 1 Patented Got Nail!™ Hanger Bracket • • • • • • 5 Air-Tite™ Code Compliant Pre-installed nail easily installs in regular lumber, engineered lumber and laminated beams Safety and guidance system prevents nail snagging, ensures smooth straight nail enetration and allows bar hangers to be easily removed if necessary Automatic levelling flange aligns the housing and lets you hold the housing in place with one hand while drivi
Halo Recessed Lighting Halo H5 (5") & H7 (6") Housing Installation Features H5 & H7 Housings • • • • Robust, full-frame construction Integral thermal protector guards against over-lamping Plaster lip notched at 90º intervals for laser centering Halo assured – logo on frame 5 3 11 6 6 2 1 4 H5 & H7 Remodel Housings • • • • Install from below the finished ceiling aperture Robust construction Integral thermal protector guards against over-lamping Halo assured – logo on can top 4 9 7 11 8 6 10 12
Halo Recessed Lighting H5 (5") & H7 (6") Housing Installation Features 1 Patented Got Nail!™ Hanger Bracket • • • • • • Pre-installed nail easily installs in regular lumber, engineered lumber and laminated beams Safety and guidance system prevents nail snagging, ensures smooth straight nail penetration and allows bar hangers to be easily removed if necessary Automatic levelling flange aligns the housing and lets you hold the housing in place with one hand while driving nails Five additional mounting poin
Halo Recessed Lighting E5 (5") & E7 (6") Housing Installation Features E5 & E7 Housings • • • • Compact and economical construction Integral thermal protector guards against over-lamping Plaster lip notched at 90º intervals for laser centering Halo assured – logo on junction box can top and q-Channel bars 11 5 3 1 6 1 2 E5 & E7 Remodel Housings • • • • • Install from below the finished ceiling aperture Compact junction box designed for ease of installation (2) Speed clamps securely lock housing to
Halo Recessed Lighting E5 (5") & E7 (6") Housing Installation Features 1 Patented All-Nail™ Hanger Bracket • • • • Pre-installed nail easily installs in regular lumber, engineered lumber and laminated beams Mini foot levelling flange aligns the housing to the bottom of the joist Integral T-bar clip snaps on to T-bars - no additional clips are required Additional screw points provided for securing to grid where required by code 6 Patent Pending Air-Tite™ Construction • • • 2 Patented q-Channel Bars wit
Halo Recessed Lighting Types of Trims Halo's 3", 4", 5", 6" apertures offer full vocabulary of trim styles, finishes and design features. Smaller 3" and 4" trims are used for task and accent lighting, and many 4" trims with a wide beam are used for general downlighting. Larger 5" and 6" trims are used for general downlighting as many offer a wide beam for even illumination. Halo trims may be used with a wide variety of light sources including Incandescent, Halogen, CFL, and LED.
Halo Recessed Lighting Sizes & Finishes of Trims Halo gives you the tools to create the exact interior environment you envision. Choose from Halo trims that range in size of 3", 4", 5" and 6". Selections round out the choices available for residential and light commercial applications. Reflector Finishes Reflectors are offered in several finishes for high efficiency, to soften illumination, or to make a defined decorating statement.
Halo Recessed Lighting Trim – Features & Designs A full line of trim styles, finishes and design features are expanding in the Halo trim collection. With these trim and feature expansions, Halo is bringing ways to help ease installation process. While keeping products classy and the ability to personalize your lighting fixtures to best suit the space. These trims are specifically modeled to work with the E26 screw base housings and are compatible with EISA halogen, incandescent, CFL & LED equivalent lamps.
Halo Recessed Lighting Trim – Features & Designs 3" & 4" Trim Features • • • • Small aperture trims have less ceiling presence, and celebrate simple and clean lines around circumference Smaller aperture trims may be used to visually differentiate the room interior design Trims are also a functional element in lighting design as used for accent, task and general downlighting Designed for similar appearance regardless of lamp source whether line voltage PAR20 or low voltage MR16 3" Trim Designs 5" Trim Fe
Halo Recessed Lighting Listings, Compliance & Industry Associations Rising energy demand and corresponding costs are a fact of life and lighting fixtures play a two fold role in the energy equation – besides the light sources and fixtures themselves, their effect on heating and air conditioning costs must also be considered.
Halo Recessed Lighting Lighting Properties Luminous Flux (Lumens) Luminous flux (lumens) is the measure of the total light producing power of the light source. It is the amount of light leaving the source without regards to direction. A halogen 72W A19 clear lamp has 1520 nominal lamp lumens. The luminous flux is provided by the lamp manufacturers in a listing of common lamp and lumen values.
Halo Recessed Lighting Lighting Properties Cutoff & Shielding Angle Illuminating Engineering Society (IES) Evaluating Light Source Color Rendition Illuminating Engineering Society (IES) TM-30-15 method for evaluating light source color rendition. IES TM-30-15 is a technical memorandum published by the IES that details a new method for evaluation and identification of color rendition properties of a light source.
Halo Recessed Lighting Lighting Effects Ambient Lighting Point-to-Point Calculations The calculation of foot-candles at a point, no matter if it is on a horizontal, vertical or tilted surface, can be accomplished with the inverse square law. The law states that the illuminance is proportional to the candlepower of the source in the given direction and inversely proportional to the square of the distance from the source.
Halo Recessed Lighting Light Sources Halogen Low Voltage (MR16) Light Emitting Diodes (LED) Multifaceted Reflector (MR) lamps produce crisp, white light; with more typical sparkle than PAR lamps. Low voltage halogen lamps offer the best light control and are ideal for accenting. Low voltage lamps require a transformer in the fixture to step line voltage down to nominal lamp operating voltage. Applications: Task, Accent, Wall Wash, Grazing Sizes: MR16 Beam Spread: Many available. Measured in beam angles.
HALO Home Smart Lighting System LED Modules ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙28 LED Outdoor ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 30 Flood ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 30 Flood + Motion ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 31 Smart Controls ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 32 Smart Dimmer ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
HALO Home Smart Lighting System LED Products Smart Lighting System Indoor + Outdoor + Controls HALO Home Collection HALO Home is a flexible new approach to smart home lighting. Our system offers a range of Bluetooth® fixtures, controls and accessories that work seamlessly together. From a single light to an entire home, your smart lighting search starts and ends here.
HALO Home Smart Lighting System LED Products HALO Home app Voice control compatible Our user-friendly mobile app lets you control lighting from your fingertips, and from anywhere in the world (with the optional Smart Internet Access Bridge). Available for iOS and Android, it features dimming, adjustable white tuning, grouping, automatic scheduling and more. Customize your home lighting with anywhere in the world access and voice control.
HALO Home RL4 - Bluetooth 2.43” 2.43” [61.7mm] [61.7mm] 5.12” 5.12” [130.13mm] [130.13mm] RL4 4" LED All-Purpose Retrofit Module with Bluetooth Mesh Connectivity The Halo Home RL4 is an integrated LED module with Bluetooth® Mesh connectivity for 4” aperture recessed downlights. When paired with the Halo Home mobile app or Halo Home Accessory dimmers, the RL4 can be wirelessly controlled. Suitable for new construction, remodel and retrofit installation.
HALO Home RL56 - Bluetooth 2.67” [67.8mm] 7.25” [184.2mm] RL56 5"/6” LED All-Purpose Retrofit Module with Bluetooth Mesh Connectivity The Halo Home RL56 is an integrated LED module with Bluetooth® Mesh connectivity for 5” & 6” aperture recessed downlights. When paired with the Halo Home mobile app or Halo Home Accessory dimmers, the RL56 can be wirelessly controlled. Suitable for new construction, remodel and retrofit installation.
HALO Home FTS20C Flood - Bluetooth Front View Side View 6.7" [170 mm] 10.3" [261 mm] Eave Mount FTS20C Twin Head LED Flood with Bluetooth Mesh Connectivity The HALO Home smart LED floodlight incorporates Bluetooth® Mesh technology into a durable, twin head design for an advanced outdoor lighting solution built for high performance.
HALO Home MST20C Motion Flood - Bluetooth Front View Side View 10.3" [261 mm] 6.7" [170 mm] Eave Mount MST20C Smart Motion Floodlight Twin Head LED Motion with Bluetooth Mesh Connectivity The HALO Home Smart Motion Floodlight incorporates Bluetooth® Mesh technology into a durable, twin head LED motion sensor flood design for an advanced outdoor lighting solution built for high performance.
HALO Home HIWMA1BLE40AWH In-Wall Smart Dimmer - Bluetooth Only use with non-smart lights 1.6” [41.2 mm] 3.8” [96.8 mm] 4.2” [106.6 mm] 3.3” [83.3 mm] 1.8” [45.7 mm] HIWMA1BLE40AWH In-Wall Smart Dimmer Turn standard/non-smart lights into smart lights – enabling mobile ON/OFF, dimming, groups, scenes and schedules via Bluetooth, even when switched OFF at the dimmer. Control a single light or an entire room with group settings within the mobile app.
HALO Home HIWAC1BLE40AWH In-Wall Accessory Dimmer - Bluetooth 1.6” [41.2 mm] 3.8” [96.8 mm] 4.2” [106.6 mm] 3.3” [83.3 mm] 1.8” [45.7 mm] HIWAC1BLE40AWH In-wall Accessory Dimmer The HALO Home In-Wall Accessory Dimmer controls your HALO Home lighting devices from a central location. The Accessory Dimmer is designed to connect to the HALO Home Bluetooth Mesh network with no hub or internet connection required.
HALO Home HIWSKB1BLE40AWH Multi-Room Scene Keypad- Bluetooth 1.71” [43.5 mm] 0.26” [6.80 mm] 1.14” [29 mm] 3.8” [96.8 mm] 4.15” [105.3 mm] Battery Powered HIWSKB1BLE40AWH Battery Powered Multi-Room Scene Keypad The HALO Home Multi-Room Scene Keypad allows you to control up to four lighting scenes or groups, ON/OFF and dimming throughout your home from a central location. The Keypad contains four (4) scene buttons, dim-up and dim-down buttons, and all scene OFF button.
HALO Home HWAS1BLE40AWH Anyplace Bluetooth Dimmer- Bluetooth 3” [76.03mm] .328” [8.32mm] 4-11/16” [118mm] HWAS1BLE40AWH Anyplace Bluetooth Dimmer The HALO Home Anyplace Bluetooth Dimmer allows for HALO Home Bluetooth Mesh compatible light fixtures to be controlled from a handheld remote controller, through the Bluetooth Mesh connection. The light fixture can be controlled from the remote controller or through the HALO Home mobile app, using a smart phone or other device.
HALO Home HWB1BLE40AWH Internet Access Bridge- Bluetooth 1.3” [32.60mm] 2” [51.5mm] 1.6” [39.60mm] HWB1BLE40AWH Internet Access Bridge The HALO Home Internet Access Bridge (Bridge) enables you to control your HALO Home devices and accessories from anywhere in the world. The Bridge establishes a secure connection between your local Bluetooth network and the HALO Home Cloud, enabling you to take advantage of an ever-increasing lineup of Cloud services, including Amazon Alexa and Google Assistant.
1.57” 40mm HALO Home HWP1BLE40AWH Smart Plug-In Lamp Dimmer - Bluetooth 2.40” 60.91mm 1.57” 40mm 2.59” 65.67mm 2.40” 60.91mm HWP1BLE40AWH Smart Plug-In Lamp Dimmer The HALO Home Smart Plug-In Lamp Dimmer enables convenient control for standard floor and table lamps using the HALO Home mobile app. Combine with more HALO Home light fixtures and accessories to create groups and scenes throughout the home. Smart Plug-In Lamp Dimmer is for lamps only. 2.59” 65.
HALO Home HWAD1BLE40AWH Smart Light Adapter- Bluetooth 8.5” [215.9mm] 1.96” [49.7mm] 1.97” [50mm] 3” [76.2mm] .80” [20.41mm] HWAD1BLE40AWH Smart Light Adapter The HALO Home Smart Light Adapter lets you control non-smart fixtures wirelessly with the HALO Home app. The Smart Light Adapter can be used to add wireless control to any light or group of lights. The Smart Light Adapter enables individual fixture control, dimming, groups scenes and schedules from a mobile device or tablet.
LED Recessed Downlighing LED Housings ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 40 LED Modules ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙54 LT ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 54 LA ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 56 RL ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
5-1/2 inch [140mm] LED Recessed Housing H995ICAT 4-3/8 inch [111mm] Ceiling opening 8-1/2 inch [216mm] 5-1/2 inch [140mm] 4-3/8 inch [111mm] Ceiling opening H995ICAT 1/2 inch [13 mm] 5-1/4 inch [133mm] 1/2 inch [13 mm] 8-1/2 inch [216mm] 4" IC, Air-Tite, New Construction LED Housing The H995ICAT is a dedicated LED small aperture IC Air-Tite™ housing for use with Halo RA4, RL4, LT4 series LED modules and may be used with SLD4 series with the SLD spring kit.
5-1/2 inch [140mm] LED Recessed Housing 4-1/4 inch [108mm] H995RICAT 4-3/4 inch [121mm] 5-1/2 inch [140mm] Ceiling opening to match template supplied 5 inch [127mm] 4-1/4 inch [108mm] 4-3/4 inch [121mm] 14-3/4 inch [374mm] Ceiling opening to match template supplied 5 inch [127mm] H995RICAT 4" IC, Air-Tite, Remodel LED Housing The Halo H995RICAT is a dedicated LED remodel small aperture IC Air-Tite housing for use with Halo RA4, RL4, LT4 series LED modules and may be used with SLD4 series with t
LED Recessed Housing H245ICAT 5-15/16" [151mm] 8-7/8" [225mm] 3-1/2" [89mm] 4" [99mm] 4-1/4" [108mm] 4-1/2" [114mm] ceiling cutout H245ICAT 4" IC, Air-Tite, Ultra-Shallow New Construction LED Housing The H245ICAT is a 4” aperture ultra-shallow new construction housing for use with LED integrated trims. Suitable for 2x4 residential framing or shallow plenum commercial construction, type IC rated and can be used in direct contact with insulation and is air tight rated.
LED Recessed Housing H245RICAT 4-13/16” [122.24mm] 8” [203.76mm] 3-3/4” [95.36mm] 4-1/16” [103.17mm] H245RICAT 4" IC, Air-Tite, Ultra-Shallow Remodel LED Housing The H245RICAT is a 4” aperture ultra-shallow remodel housing for use with LED integrated trims. Installs from below the ceiling and suitable for 2x4 residential or shallow plenum commercial construction. Suitable for direct contact with insulation and is air tight rated.
LED Recessed Housing H45ICATD010 6" [151 mm] 5-1/2" [141 mm] 8-7/8" [225 mm] 4-1/4" [108 mm] H45ICATD010 4" IC, Air-Tite, Shallow New Construction LED Housing The H45ICATD010 is a 4” aperture shallow new construction housing for use with LED integrated trims. Installs during electrical rough in 2x6 residential or shallow plenum commercial construction. Suitable for direct contact with insulation and is air tight rated.
LED Recessed Housing H45RICATD010 6.67" [169 mm] 5-1/2" [140 mm] 4.12" [105 mm] 16" [405 mm] 4.81" [122 mm] Ceiling opening to match template supplied H45RICATD010 4" IC, Air-Tite, Shallow Remodel LED Housing The H45RICATD010 is a 4” aperture shallow remodel housing for use with LED integrated trims. Installs from below the ceiling and is suitable for 2x6 residential or shallow plenum commercial construction. Suitable for direct contact with insulation and is air tight rated.
7" [178mm] Outer Dimension LED Recessed Housing H550ICAT 1/2" [13mm] 5-3/4" [146mm] Ceiling opening 7" [178mm] Outer Dimension 1/2" [13mm] 5-3/4" [146mm] Ceiling opening H550ICAT 10-1/2" [267mm] 7-1/4" [184mm] 5" IC, Air-Tite, New Construction, LED Housing The H550ICAT is a dedicated LED new construction housing to be used with compatible Halo LED modules and trims. The H550ICAT is designed for insulated ceilings and can be in direct contact with ceiling insulation*.
7" [178mm] LED Recessed Housing H550RICAT 1/2" [13mm] 5-1/2" [140mm] Ceiling opening to match template supplied 7" [178mm] 1/2" [13mm] 6-1/8" [155mm] 14" [356mm] 5-1/2" [140mm] Ceiling opening to match template supplied H550RICAT 6-1/8" [155mm] 5" IC, Air-Tite, Remodel, LED Housing The H550RICAT is a dedicated LED remodel housing to be used with compatible Halo LED modules and trims.
7" [176mm] LED Recessed Housing 6-1/2" [165mm] Ceiling opening H750ICAT 1/2" [13mm] TOP VIEW 7" [176mm] 7-3/8" [187mm] 10 1/2" [267mm] 6-1/2" [165mm] Ceiling opening 1/2" [13mm] TOP VIEW H750ICAT 7-3/8" [187mm] 6" ICAT, Air-Tite, New Construction, LED Housing The H750ICAT is a LED new construction housing to be used with compatible Halo LED modules and trims. The H750ICAT is designed for insulated ceilings and can be in direct contact with ceiling insulation*.
7" [178mm] LED Recessed Housing 6-1/4” [159mm] H750RICAT 1/2" to 5/8" [13mm to 15mm] Ceiling opening to match template supplied 6-7/8" [175mm] 7" [178mm] 6-1/4” [159mm] 1/2" to 5/8" [13mm to 15mm] 13-1/4" [337mm] Ceiling opening to match template supplied 6-7/8" [175mm] H750RICAT 6" ICAT, Air-Tite, Remodel, LED Housing The H750RICAT is a LED remodel housing to be used with compatible Halo LED modules and trims.
7" [176mm] LED Recessed Housing H750T 6-1/2" [165mm] Ceiling opening 1/2" [13mm] TOP VIEW 7" [176mm] 6-1/2" [165mm] Ceiling opening 1/2" [13mm] 7-3/8" [187mm] 10 1/2" [267mm] TOP VIEW H750T 7-3/8" [187mm] 6" Non-IC, New Construction, LED Housing The H750T is a LED new construction housing to be used with compatible Halo LED modules and trims. The H750T is designed for non-insulated ceilings. If insulation is present it must be kept three inches from all sides of the housing.
7" [178mm] LED Recessed Housing H750TCP 6-1/2" [165mm] Ceiling opening 1/2" [13mm] TOP VIEW 7" [178mm] 6-1/2" [165mm] Ceiling opening 6-1/8" [155mm] 1/2" [13mm] 10-1/4" [260mm] TOP VIEW H750TCP 6-1/8" [155mm] 6" Non-IC, New Construction or Remodel, Chicago Plenum, LED Housing The H750TCP is a LED new construction/remodel Non-IC housing to be used with compatible Halo LED modules and trims. The H750TCP is designed for Chicago Plenum ceilings.
10-3/8" [263mm] LED Recessed Housing E750ICAT 7-1/4" [185mm] 6-3/4" [171mm] 10-3/8" [263mm] 6-1/2" [165mm] 1/2" [13mm] 7-1/4" [185mm] 6-3/4" [171mm] E750ICAT 6" IC, New Construction, LED Housing Recessed 6” aperture new construction housing for use with LED integrated trims or modules. Suitable for 2x8 residential framing or commercial plenum construction, type IC rated and can be used in direct contact with insulation.
LED Recessed Housing 7" [178mm] E750RICAT 10-1/2" [268mm] 7" [178mm] 6-1/4" [159mm] 7" [178mm] 10-1/2" [268mm] 1/2" [13mm] 7" [178mm] E750RICAT 6" IC, Remodel, LED Housing Recessed 6” aperture install from below remodeler type housing for use with LED integrated trims or modules. Suitable for 2x8 residential framing or commercial plenum construction, type IC rated and can be used in direct contact with insulation*.
LED Recessed LT4 Series 3.15” [80mm] 5.31” [135mm] LT4 Energy Data LT4 Input Voltage: 120V 4" LED Retrofit Module Input Current: 0.069A The Halo LT4 is an LED baffle-trim module for 4" aperture recessed downlights; suitable for new construction, remodel and retrofit installation. The LT4 is UL Certified for use with Halo, and other compatible 4" housings. Precision construction makes any housing Air-Tite for added HVAC savings and code compliance. Input Power: 8.0W THD: ≤ 24% Power Factor: ≥ 0.
LED Recessed LT56 Series High Lumen 3.38” [86mm] 3.5” [88mm] 7.19” [183mm] 7.19” [183mm] LT560 LT560 Energy Data 5"/6" LED Retrofit Module – 5 Inch Application 600 Lumen The Halo LT560 is an LED baffle-trim module for 5" and 6" aperture recessed downlights; suitable for new construction, remodel and retrofit installation. The LT560 is UL Certified for use with Halo and other compatible 5" and 6" housings. Precision construction makes any housing Air-Tite for added HVAC savings and code compliance.
LED Recessed LA4 Series 3.44” [87.42mm] 5.08” [129mm] 3.64” [92.5mm] LA4 4" LED All-Purpose Adjustable Gimbal The Halo LA4 LED Adjustable Downlight series are adjustable LED Modules for 4” aperture recessed downlights. The LA4 gimbals feature adjustment of 35-degree tilt and up to 360-degree rotation. The lens provides uniform illumination and wet location listing.. Precision construction makes any housing AIR-TITE for added savings and code compliance.
LED Recessed LA56 Series 3.71” [94.3mm] 7.26” [184mm] 3.96” [100.7mm] LA56 5”/6” LED All-Purpose Adjustable Gimbal The Halo LA56 LED Adjustable Downlight series are adjustable LED Modules for 5” or 6” aperture recessed downlights. The LA56 gimbals feature adjustment of 35-degree tilt and up to 360-degree rotation. The lens provides uniform illumination and wet location listing. Precision construction makes any housing AIR-TITE for added savings and code compliance.
LED Recessed RL4 - 600 & 900 SeleCCTable Series 2.43” 2.43” [61.7mm] [61.7mm] 5.12” 5.12” [130.13mm] [130.13mm] RL4 4" LED All-Purpose Retrofit Module with SeleCCTable switch The Halo RL4 SeleCCTable™ is a complete LED Baffle-Trim Module for 4-inch aperture recessed downlights; suitable for new construction, remodel and retrofit installation. Using the CCT selectable switch users can chose between five different color temperatures. The lens provides uniform illumination and wet location listing.
LED Recessed RL4 Series 2.43” 2.43” [61.7mm] [61.7mm] 5.12” 5.12” [130.13mm] [130.13mm] RL4 4" LED All-Purpose Retrofit Module The Halo RL4 series is a retrofit LED baffle-trim module for 4" aperture recessed downlights. The RL4 is designed for use with compatible 4" housings. The RL4 integral LED driver is dimmable at 120 volts. The RL4 lens provides uniform illumination and wet location listing. Precision construction makes any housing Air-Tite for added HVAC savings and code compliance.
LED Recessed RLD4 Series 3.068” [77.92 mm] 5.118” [130 mm] RLD4 4" LED Deep Baffle Retrofit Module The Halo RL4 Deep Baffle is a complete LED Baffle-Trim Module for 4-inch aperture recessed downlights; suitable for new construction, remodel and retrofit installation. The regressed lens provides uniform illumination and wet location listing. Precision construction makes any housing AIR-TITE for added savings and code compliance.
LED Recessed RL56 - 600, 900 & 1200 SeleCCTable Series 600/900 Lumen 2.67” [67.8mm] 7.25” [184.2mm] 1200 Lumen 3.19” [81.1mm] RL56 5”/6” LED All-Purpose Retrofit Module with SeleCCTable switch The Halo RL56 SeleCCTable™ is a complete LED Baffle-Trim Module for 5 inch and 6 inch aperture recessed downlights; suitable for new construction, remodel and retrofit installation. Using the CCT selectable switch users can chose between five different color temperatures.
LED Recessed RL56 - 600, 900 & 1200 Series 2.33” [59.22mm] 7.25” [184.15mm] RL560WH6xxx – 600 Series RL560WH9xxx – 900 Series RL560WH12xxx – 1200 Series 5"/6" LED Retrofit Module 90 CRI The Halo RL560 is a complete LED baffle-trim module for 5" and 6" aperture recessed downlights; suitable for new construction, remodel and retrofit installation. The RL560 is UL Certified for use with Halo housings and other compatible 5" and 6" housings.
LED Recessed RL56 - 600, 900 & 1200 Series RL56 600, 900 & 1200 Series Ordering Information 600 Series - 90 CRI 900 Series - 90 CRI 1200 Series - 90 CRI RL560WH6927 = 5"/6" Retrofit baffle, 2700K, matte white RL560WH6930 = 5"/6" Retrofit baffle, 3000K, matte white RL560WH6935 = 5"/6" Retrofit baffle, 3500K, matte white RL560WH6940 = 5"/6" Retrofit baffle, 4000K, matte white RL560WH6950 = 5"/6" Retrofit baffle, 5000K, matte white RL560WH9927 = 5"/6" Retrofit baffle, 2700K, matte white RL560WH9930 = 5"/6
LED Recessed RLD6 Series 4.7” [118.52 mm] 7.24” [184 mm] RLD6 6” LED Deep Baffle Retrofit Module The Halo RL6 Deep Baffle is a complete LED Baffle-Trim Module for 6 inch aperture recessed downlights; suitable for new construction, remodel and retrofit installation. The regressed lens provides uniform illumination and wet location listing. Precision construction makes any housing AIR-TITE for added savings and code compliance.
LED Recessed RA4 SeleCCTable Series 3.33” [84.58mm] 5.13” [130.2mm] RA4 4” LED All-Purpose Retrofit Module with SeleCCTable switch The Halo RA4 SeleCCTable™ LED Adjustable Gimbal is a complete LED BaffleTrim Module for 4-Inch aperture recessed downlights. It is suitable for new construction, remodel and retrofit installation. Using the CCT selectable switch users can chose between five different color temperatures.
LED Recessed RA4 Series 3.3” [86mm] 80° 25° RA4 (VWFL) Ø 5.13” [130mm] RA4 (NFL) 4" Adjustable Gimbals All-Purpose LED Retrofit Modules The Halo RA4 LED adjustable gimbal series are retrofit LED modules for 4" aperture recessed downlights. The RA4 gimbals feature adjustment of 35-degree tilt and up to 360-degree rotation.
LED Recessed RA56 SeleCCTable Series 7.25” [184.2mm] 3.5” [88.9mm] RA56 5”/ 6” LED All-Purpose Retrofit Module with SeleCCTable switch The Halo RA56 SeleCCTable™ LED Adjustable Gimbal is a complete LED BaffleTrim Module for 5-Inch or 6-Inch aperture recessed downlights. It is suitable for new construction, remodel and retrofit installation. Using the CCT selectable switch users can chose between five different color temperatures.
LED Recessed RA56 Series 25° RA56069xxNFLWH 80° RA56069xxWH 5"/6" LED Adjustable Gimbal – 5 Inch Application The Halo RA56 LED adjustable gimbal series are retrofit LED modules for 5" and 6" aperture recessed downlights; suitable for new construction, retrofit and remodel. The RA56 gimbals feature adjustment of 35-degree tilt and up to 360-degree rotation.
LED Recessed RA56 Series RA56 Series Ordering Information Very Wide Flood - VWFL Models Narrow Flood - NFL Models RA5606927WH = 5"/6" Adjustable gimbal, 90 CRI, 2700K, matte white, very wide flood RA5606930WH = 5"/6" Adjustable gimbal, 90 CRI, 3000K, matte white, very wide flood RA5606927NFLWH = 5"/6" Adjustable gimbal, 90 CRI, 2700K, matte white, narrow flood RA5606930NFLWH = 5"/6" Adjustable gimbal, 90 CRI, 3000K, matte white, narrow flood Accessories (Order Separately) RA56 Energy Data Oversize Tri
LED Recessed RSQ4 Series 5.12” [130mm] 2.575” [65.40mm] 2.90” [73.65mm] RSQ4 4" LED All-Purpose Square Retrofit Module The RSQ4 is an integrated LED module / trim with a square shallow lens suitable for new construction, remodel and retrofit installation. Certified for use with Halo and compatible 4” housings and can be used with housings in direct contact with insulation. Integral gasket provides airtight compliance in non-airtight housings, provides code compliance and additional energy savings.
LED Recessed RSQ5 2.88” 6.38” [73.20mm] [162mm] 3.62” [92.06mm] RSQ5 5" LED All-Purpose Square Retrofit Module The RSQ5 is an integrated LED module / trim with a square shallow lens suitable for new construction, remodel and retrofit installation. Certified for use with Halo and compatible 5” housings and can be used with housings in direct contact with insulation. Integral gasket provides airtight compliance in non-airtight housings, provides code compliance and additional energy savings.
LED Recessed RSQ6 Series 3.06” [77.7mm] 7.25” [184.04mm] 4.38” [11.26mm] RSQ6 6" LED All-Purpose Square Retrofit Module The RSQ6 is an integrated LED module / trim with a square shallow lens suitable for new construction, remodel and retrofit installation. Certified for use with Halo and compatible 6” housings and can be used with housings in direct contact with insulation. Integral gasket provides airtight compliance in non-airtight housings, provides code compliance and additional energy savings.
LED Recessed ML4 Series 3-3/8” [85.98mm] 3/16” [4.32mm] 5” [127mm] 5” [127mm] 2-5/32”[54.99mm] 2-5/32”[55mm] ML4D - TL41R & TL42S 4” LED Module, 2-inch Round and Square Pinhole Downlight Recessed LED module with interchangeable 2-inch round or square open pinhole apertures are available in various finishes to suit many décors. Use with 4-inch nominal recessed housings suitable for residential and shallow plenum commercial construction or can be used to retrofit existing installations.
LED Recessed ML4 Series 5” [127mm] 2-1/2” [65.04mm] 2-5/16” [59.19mm] 3-3/8” [85.98mm] 5” [127mm] 2-1/2” [65.03mm] 2-5/16” [59.19mm] 3/16” [4.32mm] ML4D - TL43R & TL44S 4” LED Module, 2-inch Round and Square Pinhole Downlight Recessed LED module with interchangeable 2-inch round or square lens pinhole apertures are available in various finishes to suit any décor.
LED Recessed ML4 Series 3-3/8” [85.98mm] 3/16” [4.32mm] 5” [127mm] 5” [127mm] 2-5/32”[54.99mm] 2-5/32”[55mm] ML4D - TL45R & TL46S 4” LED Module, 2-Inch Round and Square Lens Wall Washer Recessed LED module with interchangeable 2-inch round or square wall wash apertures are available in various finishes to suit any décor. Use with 4-inch nominal recessed housings suitable for residential and shallow plenum commercial construction or can be used to retrofit existing installations.
LED Recessed ML4 Series TL41R 2” Round Open Pinhole • • • • • Die formed steel trim with 2” pinhole Field interchangable Available in painted or plated finishes Paint in the field to match any décor Magnetic attachment holds trim tight to ceiling and eliminates light leaks TL41RMW matte white flange TL41RBN brushed nickel flange TL41RBCu brushed copper flange TL41RMB matte black flange TL41RORB oil rubbed bronze flange TL41RGB german bronze flange TL42SMW matte white flange TL42SBN brushed nickel
LED Recessed ML4 Series TL45R 2” Round Lens Wall Wash Pinhole • • • • • Die formed steel trim with 2” pinhole Field interchangable Available in painted or plated finishes Paint in the field to match any décor Magnetic attachment holds trim tight to ceiling and eliminates light leaks OD H TL45R6GMWWB matte white flange, white lens frame TL45R6GMWBB matte white flange, black lens frame Dimensions** A: 2-1/2" [65mm] H: 3/16" [4.
LED Recessed Housing ML4 Series - HS4R / HS4S 5” [127mm] 5” [127mm] 5” [127mm] 2-5/32” [54.99mm] 3-13/16” [97.28mm] 2-5/32” [55mm] Side View with Trim Installed Top View with Trim Installed Top View with Trim Installed Bottom View Bottom View HS4R / HS4S 4" Round & Square Surface Mount Housings The HS4R round and HS4S square housings adapt ML4 LED module and associated 2” aperture open, len and lens wall wash trims to complete a surface mount luminaire.
LED Recessed ML56 – 600 & 900 Series 4-1/2" [114mm] 3" [76mm] ML5606xxx – 600 Series ML5609xxx – 900 Series 3" [76mm] 5"/6" LED Retrofit Module – 6 Inch Application The ML56 LED downlighting system is a series of LED light modules for use with designated 6" ML56 LED trims in new construction, remodel and retrofit housings. Compatible with Halo 6" housings. ML56 light modules are offered in 600 series, 900 series, and 1200 series, 90 CRI, and four color temperatures 2700K, 3000K, 3500K, 4000K.
LED Recessed ML56 – 1200 Series 4-1/2" [115 mm] 4-1/2" [115 mm] ML56 LED Module 3-1/3" [85mm] Ø 3.75" [95 mm] Ø 3.75" [95 mm] Beam Forming Optic (Accessories) 1.1" [28mm] ML5612xxx – 1200 Series 5"/6" LED Retrofit Module – 6 Inch Application The ML56 LED downlighting system is a series of LED light modules for use with designated 6" ML56 LED trims in new construction, remodel and retrofit housings. Compatible with Halo 6" housings.
LED Recessed ML56 – 600, 900 & 1200 Series Details ML56 Ordering Information 600 Series - 90 CRI 900 Series - 90 CRI 1200 Series - 90 CRI ML5606927 = 600 lumen, 2700K ML5606930 = 600 lumen, 3000K ML5606935 = 600 lumen, 3500K ML5606940 = 600 lumen, 4000K ML5609927 = 900 lumen, 2700K ML5609930 = 900 lumen, 3000K ML5609935 = 900 lumen, 3500K ML5609940 = 900 lumen 4000K ML5612927 = 1200 lumen, 2700K ML5612930 = 1200 lumen, 3000K ML5612935 = 1200 lumen, 3500K ML5612940 = 1200 lumen, 4000K 690 Series - 6"
LED Recessed ML56 69x Trims 691 Shallow Polymer Baffle, Self-flange • • • • • • Shallow polymer (plastic) baffle with self-flange For use with ML56 600 series LED modules ONLY Non-conductive polymer (plastic) "dead-front" construction Shallow height allows use in shallow or standard ceiling housings Wet location shower listed with ML56 LED modules For use with 600 series ML56 LED modules ONLY Dimensions** A OD H 691WB White Shallow Polymer Baffle, White Self-flange A: 4-7/8" [123mm] H: 1-1/2" [39mm] O
ML56 69x Trims HL3 3-inch Integrated LED A 3-inch family of round and square aperture LED downlight / directional housings with field interchangeable optics. High efficiency, excellent light control and low aperture brightness are required. The HL3 is ideal for accent, task and general area lighting. Airtight housings, suitable for residential or shallow plenum commercial constructions and can be used in direct contact with insulation.
HL3 3-inch LED housings and trims Seamless Ceiling Integration Halo now offers a complete family of 3-inch LED recessed downlights ideal for your next demanding project. Choose from round or square apertures available in broad range of trim styles and optical distributions meeting demanding architectural factors including ceiling height, square footage and fixture spacing criteria. Trims are available in a range of finishes to match many décors.
Ease of installation High-end residential and prestige commercial ceiling construction is complex. Housings have numerous proprietary contractor features and install quickly saving time and money. The same housing type is used for task, accent, wall washing and general area illumination simplifying planning and installation. Optical distribution can be easily changed in the field to adapt to changes in the field.
16.55” [420.38 mm] 5.51” [139.85 mm] HL3 LED Series Housing 10.23” [259.90 mm] HL36A Series 16.55” [420.38 mm] 5.51” [139.85 mm] 14” [355.60 mm] 5.41” [137.52 mm] 10.23” [259.90 mm] 5.87” [149.02 mm] 0.5” - 7/8” with standard collar 7/8” - 1-1/4” for extension collar accessory 14” [355.60 mm] Note: For use in shallow ceilings with 2˝ x 6˝ joist construction. 5.41” [137.52 mm] HL36A 3" IC, Shallow New Construction, LED Housing 5.87” [149.
HL3 Round Trim Series Use with HL36A Series Housings Directional Open TL3R Conical Reflector, Open, Self Flanged • • • • • • Recessed 3-inch aperture LED downlight / directional with field interchangeable optics provide various distribution patterns. Ideal for accent, task and general area lighting. Housing is airtight, suitable for 2x6 residential or shallow plenum commercial constructions. Can be used in direct contact with insulation.
HL3 Round Trim Series Use with HL36A Series Housings TL3PINMWWBRL Round Pinhole w/Oculus, Open, Rimless • • • • • • Recessed 3-inch aperture LED downlight / directional with field interchangeable optics provide various distribution patterns. Ideal for accent, task and general area lighting. Housing is airtight, suitable for 2x6 residential or shallow plenum commercial constructions. Can be used in direct contact with insulation.
HL3 Round Trim Series Use with HL36A Series Housings TL3R2GBBWF / TL3R2GWBWF Conical Baffle, Diffuse Lens, Self Flanged • • • • • • Recessed 3-inch aperture LED downlight / directional with field interchangeable optics provide various distribution patterns. Ideal for accent, task and general area lighting. Housing is airtight, suitable for 2x6 residential or shallow plenum commercial constructions. Can be used in direct contact with insulation.
HL3 Round Trim Series Use with HL36A Series Housings Lens Wall Wash TL3LWW6G Conical Angle Cut Lens Wall Wash, Self Flanged • • • • • • Recessed 3-inch aperture LED downlight / directional with field interchangeable optics provide various distribution patterns. Ideal for accent, task and general area lighting. Housing is airtight, suitable for 2x6 residential or shallow plenum commercial constructions. Can be used in direct contact with insulation.
16.55” [420.38 mm] 5.51” [139.85 mm] HL3 LED Series Housing 10.23” [259.90 mm] HL36SA Series 16.55” [420.38 mm] 5.51” [139.85 mm] 14” [355.60 mm] 5.41” [137.52 mm] 10.23” [259.90 mm] 5.87” [149.02 mm] 0.5” - 7/8” with standard collar 7/8” - 1-1/4” for extension collar accessory 14” [355.60 mm] Note: For use in shallow ceilings with 2˝ x 6˝ joist construction. 5.41” [137.52 mm] HL36SA 5.87” [149.
HL3 Square Trim Series Use with HL36SA Series Housings Directional Open TLS3R Square Reflector, Open, Self Flanged • • • • • • Recessed 3-inch aperture LED downlight / directional with field interchangeable optics provide various distribution patterns. Ideal for accent, task and general area lighting. Housing is airtight, suitable for 2x6 residential or shallow plenum commercial constructions. Can be used in direct contact with insulation.
HL3 Square Trim Series Use with HL36SA Series Housings TLS3PINMWWBRL Square Pinhole w/Oculus, Open, Rimless • • • • • • Recessed 3-inch aperture LED downlight / directional with field interchangeable optics provide various distribution patterns. Ideal for accent, task and general area lighting. Housing is airtight, suitable for 2x6 residential or shallow plenum commercial constructions. Can be used in direct contact with insulation.
HL3 Square Trim Series Use with HL36SA Series Housings TLS3R2GBBWF / TLS3R2GWBWF Square Baffle, Diffuse Lens, Self Flanged • • • • • • Recessed 3-inch aperture LED downlight / directional with field interchangeable optics provide various distribution patterns. Ideal for accent, task and general area lighting. Housing is airtight, suitable for 2x6 residential or shallow plenum commercial constructions. Can be used in direct contact with insulation.
HL3 Square Trim Series Use with HL36SA Series Housings Lens Wall Wash TLS3LWW6G Square Angle Cut Lens Wall Wash, Self Flanged • • • • • • Recessed 3-inch aperture LED downlight / directional with field interchangeable optics provide various distribution patterns. Ideal for accent, task and general area lighting. Housing is airtight, suitable for 2x6 residential or shallow plenum commercial constructions. Can be used in direct contact with insulation.
5-3/8" [136mm] outer dimension H4 LED Series Housing H457ICAT1E 1/2" [13mm] 4-1/4" [108mm] 5-3/8" [136mm] outer dimension 8-1/2" [216mm] 1/2" [13mm] 4-1/4" [108mm] H457ICAT1E 6" [152mm] 4" IC, Air-Tite, Shallow New Construction, LED Housing The Halo H4 LED is a family of 4" aperture recessed downlight H457 series of housings designed for exclusive use with Halo EL406, ELG406, ELSG406 series LED light engines and compatible 4" TL4 and TLS4 LED trims.
5-1/2" [140mm] H4 LED Series Housing 4-1/4" [108mm] H457RICAT1E 4-3/4" [121mm] 5" [127mm] 5-1/2" [140mm] 4-1/4" [108mm] 14-3/4" [374mm] Ceiling Opening to match template supplied 4-3/4" [121mm] H457RICAT1E Ceiling Opening to match template supplied 5" [127mm] 4" IC, Air-Tite, Shallow Remodel, LED Housing The Halo H4 LED is a family of 4" aperture recessed downlight H457 series of housings designed for exclusive use with Halo EL406, ELG406, ELSG406 series LED light engines and compatible TL4 a
H4 LED Series Housing 5-1/2" [140mm] H457TATE010 4-1/2" [114mm] 5-1/2" [140mm] 1/2" [13mm] 5-1/2" [140mm] 8" [203mm] 4-1/2" [114mm] 5-1/2" [140mm] 1/2" [13mm] H457TATE010 8" [203mm] 4" Non-IC, Shallow New Construction, Dimmable LED Housing The Halo H4 LED is a family of 4" aperture recessed downlight H457 series of housings designed for exclusive use with Halo EL406, ELG406, ELSG406 series LED light engines and compatible 4" TL4 and TLS4 LED trims.
5-1/2" [140 mm] H4 LED Series Housing 4-1/4" [108 mm] 4-3/4" [121 mm] H457RTATE010 Ceiling opening to match template supplied 5" [127 mm] 5-1/2" [140 mm] 4-1/4" [108 mm] 4-3/4" [121 mm] 14-3/4" [374 mm] Ceiling opening to match template supplied 5" [127 mm] 4" Non-IC, Shallow Remodel, Dimmable LED Housing The Halo H4 LED is a family of 4" aperture recessed downlight H457 series of housings designed for exclusive use with Halo EL406, ELG406, ELSG406 series LED light engines and compatible 4" TL4 a
6-1/2" [165mm] H4 LED Series Housing H457TCPE010 4-1/2" [114mm] 1/2" [13mm] 5-1/2" [140mm] 6-1/2" [165mm] 8" [203mm] 1/2" [13mm] 4-1/2" [114mm] 5-1/2" [140mm] 8" [203mm] H457TCPE010 4" Non-IC, New Construction, Dimmable LED Housing, Chicago Plenum The Halo H4 LED is a family of 4" aperture recessed downlight H457 series of housings designed for exclusive use with Halo EL406, ELG406, ELSG406 series LED light engines and compatible 4" TL4 and TLS4 LED trims.
H4 LED Series Light Engine EL4069xx 4.78˝ 121.41mm 4.78˝ 121.41mm 3.78˝ 96.01mm 3.78˝ 96.01mm EL4069xx 4" LED Light Engine The Halo H4 LED is a family of 4" aperture recessed downlights with Compatible Housings H457 series housings designed for use with Halo EL406 series LED H457ICAT1E H457TATE010 light engines and compatible TL4 and TLS4 series LED trims. Halo H457RICAT1E H457RTATE010 H4 LED is a three part system: EL406 light engines, with TL4/TLS4 H457TCPE010 trims and H457 housings.
H4 LED Series Trims Use with EL4069xx Light Engines TL402 Solite® Regressed Lens Reflector • • • • • • • Precision formed aluminum reflector Die cast trim ring Standard trim ring provides clearance for remodeler flange and gasket Trim and gasket provides Air-Tite™ installation Solite® lens high-clarity low-iron glass for high-lumen transmission and diffusion of source brightness Wet location listed, covered ceilings Compatible with optional TL400 designer trim rings TL402SCS Specular Clear Reflector, Wh
H4 LED Series Trims Use with EL4069xx Light Engines TL410 Deep Regressed Reflector with Diffuse Dome Lens • • • • • • • Precision formed aluminum reflector Die cast trim ring Standard trim ring provides clearance for remodeler flange and gasket Trim and gasket provides Air-Tite™ installation Polymer (plastic) diffusing dome lens Wet location listed, covered ceilings Compatible with optional TL400 designer trim rings TL410SC Specular Clear Reflector, White Trim TL410H Haze Reflector, White Trim TL410
4-1/2" [117mm] H4 LED Series Adjustable/Light Engine 5" [127mm] ELG4069xx & ELSG4069xx ELG4058 ELG4058 ELSG4058 4-1/2" 4-1/2" [117mm] [117mm] 4-1/2" [117mm] 5" 5" [127mm] [127mm] 5" [127mm] ELSG4058 ELSG4058 ELG4069xx ELSG4069xx 4" LED Gimbal, 2nd Generation Compatible Housings Halo H4 LED adjustable gimbals, ELG406 series, combine an adjustable gimbal trim and LED light engine for use with H457 series housings.
H4 LED Series Trims Use with EL4069xx Light Engines HL6 LED AllSlope Slope Ceiling Solutions Featuring unique interchangeable beam-forming optics, full range dimming and multiple color temperatures and trim options, the Halo AllSlope LED downlight system is specifically designed for slope ceiling applications with pitch aiming from 2/12 (10º) to 12/12 (45º).
7" [178mm] AllSlope LED IC Housing HL612ICAT 6-1/2" [165mm] Ceiling opening 1/2" [13mm] 7" [178mm] 9-1/2" [241mm] 6-1/2" [165mm] Ceiling opening HL612ICAT - HLM69xx 1/2" [13mm] 13" [330mm] 9-1/2" [241mm] 6" IC, Air-Tite, New Construction, LED Housing, 120V – 277V Recessed 6" sloped ceiling LED ICAT housing for insulated ceilings* from 2/12 to 12/12 pitch. The socket aiming mechanism tilts the lamp straight down regardless of ceiling pitch.
7" [178mm] AllSlope LED Non-IC Housing HL618TAT 6-1/2" [165mm] Ceiling opening 1/2" [13mm] 7" [178mm] 9-1/2" [241mm] 6-1/2" [165mm] Ceiling opening HL618TAT - HLM69xx 1/2" [13mm] 13" [330mm] 9-1/2" [241mm] 6" Non-IC, Air-Tite, New Construction, LED Housing, 120V – 277V HL618TCP - HLM69xx 6" Non-IC, Air-Tite, New Construction, LED Housing, Chicago Plenum, 120V – 277V Recessed 6" sloped ceiling LED Non-IC housing for non-insulated ceilings* from 2/12 to 12/12 pitch.
AllSlope LED System HL6 Series Ordering Information 1. Housing 2. LED Light Engines 2.
LED Direct & Surface Mount Direct Mount HLB Series ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 112 HLA Series ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 118 RL-DM Series ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 120 SMD-DM Series ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 124 Surface Mount BLD Series ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 126 CLD Series ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 130 SMD Series ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
LED Direct Mount Halo offers a series of Direct Mount (DM) products which can be installed directly into the ceiling with no additional junction box or housing required. This version of Halo downlights provides a quick installation and flush finish with the ceiling. Direct Mounts with a remote driver / junction box The MicroEdge HLB, MicroEdge HLA and RL-DM LED modules work with a remote driver / junction box that is ideal for new construction and renovation work.
Direct Mounts with an on board driver / junction box The SMD-DM modules work with an integral driver and juntion box pre-installed on the back of the fixture. It is ideal for new construction and renovation work. Simplified installation in drywall or suspended ceilings eliminates recessed cans saving time and money. SMD4R-DM SMD4S-DM SMD6R-DM SMD6S-DM Easy Installation* *Images show installation of the square SMD-DM. Follow the same steps for the round products. 1.
LED Direct Mount HLB3 & HLB3S Series HLB3 3" Ultra-thin LED Lens Round or Square Downlight The HLB3 is a 3-inch ultra-thin round or square LED lens downlight with remote driver / junction box suitable for new construction and remodel applications. Simplified installation in drywall or suspended ceilings eliminates recessed cans saving time and money. Installs from below the ceiling in as little as 3-1/2” plenum height, can be used in direct contact with insulation and is airtight.
LED Direct Mount HLB3 & HLB3S Series Oversized Trim HLB3ROTMW round, matte white 4.19” [106.3mm] 1.07” [27.1mm] .45” [11.4mm] .10” [2.5mm] 3.12” [79.3mm] cutout Ø 2.21” [56.1mm] Designer Trims HLB3RTRMMW round, white (paintable) 3.58” [91mm] 2.87” [72.92mm] HLB3RTRMSN round, satin nickel 4.83” [122.6mm] 1.66” [42.15mm] 10” [254mm] wire length HLB3RTRMTBZ round, tuscan bronze 6.
LED Direct Mount HLB4 & HLB4S Series HLB4 4" Ultra-thin LED Lens Round or Square Downlight The HLB4 is a 4-inch ultra-thin round or square LED lens downlight with remote driver / junction box suitable for new construction and remodel applications. Field selectable color temperature and high color rendering provide excellent color performance. Simplified installation in drywall or suspended ceilings eliminates recessed cans saving time and money.
LED Direct Mount HLB4 & HLB4S Series HL4RSMF round & square mounting frame .43” [10.9mm] .12” [3.05mm] Ø 3.10” [78.71mm] 4.18” [106.3mm] 4.73” [120.02mm] Oversized Trim HLB4ROTMW round, matte white 4-1/4” [107.95mm] cutout 3.16” [80.29mm] Designer Trims HLB4RTRMMW round, white (paintable) 6.5” [165mm] 10” [254mm] wire length HLB4RTRMSN round, satin nickel 1.66” [42.
LED Direct Mount HLB6 & HLB6S Series HLB6 6" Ultra-thin LED Lens Round or Square Downlight The HLB6 is a 6-inch ultra-thin round or square LED lens downlight with remote driver / junction box suitable for new construction and remodel applications. Field selectable color temperature and high color rendering provide excellent color performance. Simplified installation in drywall or suspended ceilings eliminates recessed cans saving time and money.
LED Direct Mount HLB6 & HLB6S Series 3.87” [98.2mm] wire length 2.86” [72.74mm] 6-1/8” [155.58mm] cutout 1.66” [42.15mm] HL6RSMF round & square mounting frame 4.92” [125mm] 6.42” [163mm] 4.18” [106.3mm] Ø.20” [5mm] Oversized Trim HLB6ROTMW round, matte white Ø.47” [12mm] 5.7” [144.5mm] .47” [11.9mm] Designer Trims Ø 5.02” [127.6mm] .12” [3.05mm] 10” [254mm] wire length 3.16” [80.29mm] 6.7” [170.07mm] HLB6RTRMMW round, white (paintable) 1.66” [42.15mm] HLB6RTRMSN round, satin nickel 6.
LED Direct Mount HLA4 & HLA4S Series HLA4 4" Ultra-thin LED Lens Round or Square Directional Downlight The HLA4 is a 4-inch ultra-thin round or square LED directional with remote driver / junction box suitable for new construction and remodel applications. Field selectable color temperature and high color rendering provide excellent color performance. Simplified installation in drywall or suspended ceilings eliminates recessed cans saving time and money.
LED Direct Mount HLA4 & HLA4S Series 1.34” [34.15mm] 1.94” [49.39mm] .5” [12.7mm] .1” [2.54mm] 3.1” [78.74mm] 4.19” [106.36mm] 4.73” [120.09mm] 30Ā 4.188” [106.36mm] 4.728” [120.09mm] 10” [254mm] wire length 3.16” [80.29mm] 1.66” [42.15mm] 6.
LED Direct Mount RL4-DM Series RL4-DM 4" LED Direct Mount Retrofit Module with SeleCCTable switch The Halo RL4 Direct Mount is a SeleCCTable complete LED Baffle-Trim Module for 4-inch aperture applications, all without the need for a recessed housing; suitable for new construction, remodel and retrofit installation. Using the CCT selectable switch users can chose between five different color temperatures. The RL family offers a regressed lens that provides uniform illumination and wet location listing.
LED Direct Mount RL4-DM Series 2.86” [72.74mm] 1.66” [42.15mm] 4.04” [102.5mm] wire length 4.18” [106.17mm] cutout 3.87” [98.2mm] wire length 6.42” [163mm] 4.92” [125mm] Ø.20” [5mm] 1.95” [49.56mm] Ø.47” [12mm] 5.7” [144.5mm] 5.12” [130.
LED Direct Mount RL6-DM Series RL6-DM 6” LED Direct Mount Retrofit Module with SeleCCTable switch The Halo RL6 Direct Mount is a SeleCCTable complete LED Baffle-Trim Module for 6 inch aperture applications, all without the need for a recessed housing; suitable for new construction, remodel and retrofit installation. Using the CCT selectable switch users can chose between five different color temperatures. The RL family offers a regressed lens that provides uniform illumination and wet location listing.
LED Direct Mount RL6-DM Series 2.86” [72.74mm] 3.87” [98.2mm] wire length 1.66” [42.15mm] 4.04” [102.5mm] wire length 5.75” [146.05mm] cutout 6.42” [163mm] 4.92” [125mm] Ø.20” [5mm] 1.94” [49.34mm] 7.25” [184.15mm] Ø.47” [12mm] 5.7” [144.
LED Direct Mount SMD4-DM Series SMD4RXXXWHDM SMD4RXXXWHDM 6-1/4" SMD4RXXXWHDM [158.75mm] 1/4" [6.8mm] 2" [51mm] 2" [51mm] 2" [51mm] 1/4" [6.8mm] 6-1/4" [158.75mm] 6-1/4" 1/4" [158.75mm] [6.8mm] 1/4" [6.8mm] 5-15/16" [151mm]SMD4SXXXWHDM 5-15/16" [151mm] 2" [51mm] 2" [51mm] [51mm] 7" [177mm] 7" [177mm] 1/4" [6.8mm] 5-15/16" 1/4" [151mm] [6.8mm] 2" [51mm]2" 7" [177mm] 7" [177mm] 7" [177mm] 4” LED Round and Square Direct Mount SMD4SXXXWHDM 1/4" [6.
LED Direct Mount SMD6-DM Series SMD6RXXXWHDM SMD6RXXXWHDM 7-3/8" SMD6RXXXWHDM 1/4" [6.8mm] [188.1mm] 1/4" [6.8mm] 2" [51mm] SMD6SXXXWHDM 7-3/8" [188.1mm] 1/4" SMD6RXXXWHDM [6.8mm] 7-3/8" 1/4" [188.1mm] [6.8mm] 7-3/8" [188.1mm] 1/4" SMD6SXXXWHDM [6.8mm] 1/4" [6.
LED Surface Mount BLD4 Series FIXED CCT - BLD406930WH 1-1/8” [29mm] 6-3/16” [156mm] 13/16” [21mm] SELECTABLE CCT - BLD4089SWH 7/8” [22.2mm] BLD4 4" Backlit LED Downlight The Halo Backlit LED Downlight (BLD) incorporates state of the art lighting technology to create an ultra-low profile surface mounting luminaire with the performance and look of a traditional downlight. BLD4 is designed for installation in many 3-1/2” and 4” round or octagon junction boxes including pancake boxes.
LED Surface Mount BLD4 Series BLD4 Series Ordering Information Models Lumens Color Rendering Index (CRI) Finish Voltage BLD4 = 4” Surface LED downlight, 120V (Includes hardware kits for junction box and recessed housing mounting) 06 = 600 lumen series 930 = 90CRI, 3000K WH = Matte white Blank = 120V 06 = 900 lumen series 9S = 90 CRI, SeleCCTable 2700K, 3000K, 3500K, 4000K & 5000K WH = Matte white Blank = 120V Housing Compatibility Recessed Can Size Catalog Number HALO LED Compatible Halo L
LED Surface Mount BLD6 Series FIXED CCT - BLD606930WH 1-5/16” [34mm] 13/16” [21mm] 7-3/4” [196mm] SELECTABLE CCT - BLD6089SWH 7/8” [22.5mm] BLD6 6" Backlit LED Downlight The Halo Backlit LED Downlight (BLD) incorporates state of the art lighting technology to create an ultra-low profile surface mounting luminaire with the performance and look of a traditional downlight. BLD6 is designed for installation in many 3-1/2” and 4” round or octagon junction boxes including pancake boxes.
LED Surface Mount BLD6 Series BLD4 Series Ordering Information Models Lumens Color Rendering Index (CRI) Finish Voltage BLD6 = 6” Backlit LED downlight 06 = 600 lumen series 930 = 90CRI, 3000K WH = Matte white Blank = 120V 08 = 800 lumen series 9S = 90 CRI, SeleCCTable 2700K, 3000K, 3500K, 4000K & 5000K WH = Matte white Blank = 120V Housing Compatibility Recessed Can Size Catalog Number Compatible Halo LED Housings with LED luminaire connector (high-efficacy compliant) 5” H550ICAT, H550RI
LED Surface Mount 7.3” [185.31mm] CLD7 Series 1.24” [31.62mm] 7.3” [185.31mm] CLD7 7" Low-Profile LED Downlight 1.24” [31.62mm] The Halo CLD is a low profile, high performance surface mount luminaire that offers the added flexibility of 3 selectable color temperatures at time of installation. CLD7 (7”) is designed for installation in many 3-1/2” and 4” square, octagon, or round junction boxes. Supply wire adapter with LED quick wiring connector included.
LED Surface Mount CLD7 Series CLD7 Series Ordering Information Models Lumens Color Rendering Index (CRI) Finish Accessories CLD7 = 7” LED surface light 08 = 800 lumen series 9S = 90 CRI, SeleCCTable 2700K, 3000K, 3500K, 4000K & 5000K WH = Matte white R = recyclable unit carton suitable for merchandising display Compatible with Eaton’s Crouse-Hinds Junction Box (Order Separately) • • • • TP316 For non-metallic (NM) cable 4" x 4" x 2-1/8" [102mm x 102mm x 54mm] TP316 - for non-metallic (NM) cable
LED Surface Mount SMD4 Series SMD4RXXXWH SMD4SXXXWH 15/16" [23.9mm] 9/16" [14mm] 15/16" [23.9mm] 17/32" [13.5mm] 6-5/32" [156.4mm] 5-15/16" [151mm] 5-15/16" [151mm] SMD4 4” LED Round and Square Surface Mount The Halo Surface Mount LED Downlight (SMD) is an low profile surface mounting luminaire with a modern look and high performance. SMD4 (4”) is designed for installation in many 3-1/2” and 4” square, octagon, or round junction boxes. Supply wire adapter with LED quick wiring connector included.
LED Surface Mount SMD6 - 600 & 1200 Series SMD6RXXXWH SMD6SXXXWH 15/16" [23.9mm] 15/16" 17/32" [23.9mm] [13.5mm] 9/16" [14mm] 7-9/16" [192.4mm] 7-5/8" [193mm] 7-9/16" [192.4mm] SMD6 SMD12SXXXWH SMD12SXXXWHE SMD12RXXXWH SMD12RXXXWHE 6” LED Round and Square Surface Mount The Halo Surface Mount LED Downlight (SMD) is a low profile surface mounting luminaire with a modern look and high performance. SMD6 (6”) is designed for installation in many 3-1/2” and 4” square, octagon, or round junction boxes.
LED Surface Mount SMD4 & SMD6 - 600 & 1200 Series SMD 4” & 5/6” Series Ordering Information Models Lumens CRI / CCT SMD4R = 4” Round Surface Mount Downlight, 120V SMD4S = 4” Square Surface Mount Downlight, 120V 6 = 600 lumen series 927 = 90CRI, 2700K 930 = 90CRI, 3000K 935 = 90CRI, 3500K 940 = 90CRI, 4000K 950 = 90CRI, 5000K Finish WH = Matte white Voltage SMD6R = 6” Round Surface Mount Downlight SMD6S = 6” Square Surface Mount Downlight 6 = 600 lumen series 12 = 1200 lumen series 927 = 90CRI, 2
LED Surface Mount SMD4 & SMD6 - 600 & 1200 Series Housing Compatibility Models HALO LED Compatible Halo LED Housings with LED luminaire connector (high-efficacy compliant) Recessed Can Size Catalog Number 4” H995ICAT, H995RICAT, H245ICAT, H245RICAT 5” H550ICAT, H550RICAT, E550ICAT, E550RICAT 6” H750ICAT, H750RICAT, H750T, H750RINTD010, H750TCP, H2750ICAT, H2750RICAT, E750ICAT, E750RICAT HALO Halo LED Retrofit Enclosures 6” ML7BXRFK, ML7E26RFK HALO Compatible Halo Incandescent E26 Screwbase H
LED Surface Mount SLD4 Series 6” [152mm] .8” [20.20mm] 6” [152.65mm] .7” [17.42mm] SLD4 4" LED Retrofit Module, SLD4 Model The Halo Surface LED Downlight (SLD) incorporates WaveStream™ technology to create an ultra-low profile surface mounting luminaire with the performance and look of a traditional downlight. SLD4 is designed for installation in many 3-1/2" and 4" round or octagon junction boxes. May also retrofit in 4" aperture IC and Non-IC recessed housings*.
LED Surface Mount SLD4 Series SLD4 Series Ordering Information Models Color Rendering Index (CRI) Color Temperature (CCT) Finish Standard SLD405 = 4" Surface LED downlight, 120V (Includes hardware kits for junction box and recessed housing mounting) 9 = 90 CRI 27 = 2700K 30 = 3000K 35 = 3500K 40 = 4000K WH = Matte white JB (Optional) “JB” Models SLD405 = 4" Surface LED downlight, 120V (Includes hardware kit for junction box mounting ONLY) 9 = 90 CRI 27 = 2700K 30 = 3000K 35 = 3500K 40 = 4000K
LED Surface Mount SLD6 - 600 & 1200 Series 7.79” [197.87mm] .8” [21.46mm] 7.79” [197.87mm] .7” [17.28mm] SLD606 - 600 Series, 120V SLD612 - 1200 Series, 120V 5"/6" Surface LED Retrofit Module – 6 Inch Application The Halo Surface LED Downlight (SLD) incorporates WaveStream™ technology to create an ultra-low profile surface mounting luminaire with the performance and look of a traditional downlight. SLD6 is designed for installation in many 3-1/2" and 4" square, octagon or round junction boxes.
LED Surface Mount SLD6 - Universal Voltage Series 7.79” [197.87mm] .8” [21.46mm] 7.79” [197.87mm] .7” [17.28mm] SLD612 - 1200 Series UNV, 120V-277V 5"/6" Surface LED Retrofit Module The Halo Surface LED Downlight (SLD) incorporates WaveStream™ technology to create an ultra-low profile surface mounting luminaire with the performance and look of a traditional downlight. SLD6-1200 UNV series is designed for installation in many 4" x 2-1/8" deep square junction boxes.
LED Surface Mount SLD6 - Universal Voltage Series SLD6 600 & 1200 Series Ordering Information Models Color Rendering Index (CRI) Color Temperature (CCT) Finish Voltage Standard (Includes hardware kits for junction box and recessed housing mounting) SLD606 = 6" Surface LED downlight, 120V, 600 series SLD612 = 6" Surface LED downlight, 120V, 1200 series 9 = 90 CRI 27 = 2700K 30 = 3000K 35 = 3500K 40 = 4000K WH = White 120V JB Only "JB" Models (Includes hardware kit for junction box mounting ONLY
LED Surface Mount HLC4 Series 6.16” [156.5mm] 1.05” [27.7mm] HLC4 4" Low-Profile LED Surface Mount The Halo HLC4 is a low profile, surface mount luminaire that offers easy below the ceiling installation to save time and money. The HLC4 (4”) is designed for installation in most 3-1/2” and 4” square, octagon, or round junction boxes. Supply wire adapter with LED quick wiring connector included.
LED Surface Mount HLC6 Series 7.17” [195.8mm] 1.05” [27.7mm] HLC6 6" Low-Profile LED Surface Mount The Halo HLC6 is a low profile, surface mount luminaire that offers easy below the ceiling installation to save time and money. The HLC6 (6”) is designed for installation in most 3-1/2” and 4” square, octagon, or round junction boxes. Supply wire adapter with LED quick wiring connector included.
3 INCH 3 INCH H3 Series IC Housings ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ IC Trims ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ Non-IC Housings ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ Non-IC Trims ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ IC = Insulated Ceiling 144 148 152 159 Non-IC = Non-Insulated Ceiling **Key: A: Luminous Aperture, RD/BD: Reflector/B
5-1/4" [133mm] 3 H3 Series – GU10 IC Housing INCH 1/2" [13mm] 3-3/4" [95mm] Ceiling opening H36ICAT 5-1/4" [133mm] 1/2" [13mm] 3-3/4" [95mm] Ceiling opening 13" [330mm] 13-1/2" [343mm] H36ICAT 13" [330mm] 3" IC, Air-Tite, Shallow New Construction, 120V Special Features H36ICAT is a shallow IC, Air-Tite™ housing for use with H3 3" series trims. Housing is Air-Tite to restrict airflow between conditioned spaces and unconditioned areas. For use with 120V GU10 lamps.
7-1/2" [190mm] 3 H3 Series – GU10 IC Housing H38ICAT 1/2" [13mm] INCH 3-3/4" [95mm] Ceiling opening 7-1/2" [190mm] 12-3/4" 1/2" [13mm] 3-3/4" [95mm] Ceiling opening H38ICAT 9-1/8" [231mm] [324mm] 9-1/8" [231mm] 3" IC, Air-Tite, New Construction, 120V Special Features Compatible Trims H38ICAT is an IC, Air-Tite™ housing for use with H3 3" series trims. Housing is Air-Tite to restrict airflow between conditioned spaces and unconditioned areas. For use with 120V GU10 lamps.
5-1/4" [133mm] 3 H3 Series – Low Voltage MR16 IC Housing INCH 3-3/4" [95mm] Ceiling opening H36LVICAT 5-1/4" [133mm] 3-3/4" [95mm] Ceiling opening H36LVICAT 1/2" [13mm] 13" [330mm] 1/2" [13mm] 13-1/2" [343mm] 13" [330mm] 3" IC, Air-Tite, Shallow New Construction, 120V – 12V Low Voltage, MR16 H36LVICAT is a shallow IC, Air-Tite™ housing for use with H3 3" series trims. Housing is Air-Tite to restrict airflow between conditioned spaces and unconditioned areas. For use with 12V MR16 lamps.
7-1/2" [190mm] H3 Series – Low Voltage MR16 IC Housing H38LVICAT 3 INCH 9-1/8" [231mm] 7-1/2" [190mm] 12-3/4" [324mm] 1/2" [13mm] 3-3/4" [95mm] Ceiling opening 1/2" [13mm] 3-3/4" [95mm] Ceiling opening H38LVICAT 9-1/8" [231mm] 3" IC, Air-Tite, New Construction, 120V – 12V Low Voltage, MR16 H38LVICAT is an IC, Air-Tite™ housing for use with H3 3" series trims. Housing is Air-Tite to restrict airflow between conditioned spaces and unconditioned areas. For use with 12V MR16 lamps.
3 H3 Series Trims INCH IC Housings: H36ICAT • H38ICAT • H36LVICAT • H38LVICAT Reflectors 3004 Adjustable Reflector • • • Die cast trim ring with reflector For general illumination 35° tilt, 360° orientation within housing Lamp 120V GU10 50W 12V MR16 50W Housing H36ICAT H38ICAT H36LVICAT H38LVICAT CO 3004WHW White Reflector, White Trim 3004WHC Clear Reflector, White Trim 3004WHH OD Haze Reflector, White Trim 3004SN Satin Nickel Reflector, Satin Nickel Trim Dimensions** RD CO A 3004TBZ Tu
3 H3 Series Trims INCH IC Housings: H36ICAT • H38ICAT • H36LVICAT • H38LVICAT Adjustable – Eyeballs & Gimbals 3009 Adjustable Gimbal - 35° Tilt • • • Die cast trim ring with die cast gimbal For directional accent lighting 35° tilt, 15° negative tilt, 360° gimbal orientation and trim within housing Lamp 120V GU10 50W 12V MR16 50W Housing H36ICAT H38ICAT H36LVICAT H38LVICAT CO 3009WHWB White Baffle, White Gimbal 3009WHBB Black Baffle, White Gimbal 3009BKBB Black Baffle, Black GimbalOD 3009SNBB
3 H3 Series Trims INCH IC Housings: H36ICAT • H38ICAT • H36LVICAT • H38LVICAT Lenses & Wet Location Showerlights 3007 Regressed Lens Adjustable Reflector • • • • • • Die cast trim ring: TBZ models Non-conductive & non-corrosive polymer trim ring: WHC, PCC, SN models Regressed clear lens For general illumination Wet location listed for showers 15° tilt, 360° orientation within housing Lamp 120V GU10 50W 12V MR16 50W Housing H36ICAT H38ICAT H36LVICAT CO 3007WHC Specular Clear Reflector, White Tri
3 H3 Series Trims INCH IC Housings: H36ICAT • H38ICAT • H36LVICAT • H38LVICAT Pinhole, Slot & Wall Wash 3001 Adjustable Pinhole Baffle • • • Die cast trim ring with black oculus and machined metal baffle For concentrated accent lighting 15° tilt, 360° orientation within housing Lamp 120V GU10 50W 12V MR16 50W Housing H36ICAT H38ICAT H36LVICAT Lamp 12V MR16 37W Housing H38LVICAT CO 3001WHWB White Baffle, White Trim 3001WHBB Black Baffle, White Trim 3001SNBB 3001BKBB OD Black Baffle, Satin
5" [127mm] 3 3-3/4" [95mm] Ceiling opening H3 Series – GU10 Non-IC Housing INCH 1/2" [13mm] H36TAT 5" [127mm] 3-3/4" [95mm] Ceiling opening 5-1/4" [133mm] 1/2" [13mm] 8" [203mm] H36TAT 5-1/4" [133mm] 3" Non-IC, Air-Tite, Shallow New Construction, 120V Special Features H36TAT is a Non-IC, Air-Tite™ housing for use with H3 3" series trims. Housing is Air-Tite to restrict airflow between conditioned spaces and unconditioned areas. For use with 120V GU10 lamps.
5" [127mm] H3 Series – GU10 Non-IC Housing 1/2" [13mm] 3-3/4" [95mm] Ceiling opening to match template supplied H36RTAT 3 INCH 3-5/8" [92mm] 5" [127mm] 7-1/2" [190mm] 1/2" [13mm] 3-3/4" [95mm] Ceiling opening to match template supplied H36RTAT 3" Non-IC, Air-Tite, Shallow Remodel, 120V 3-5/8"Features Special [92mm] Compatible Trims H36RTAT is a Non-IC, Air-Tite™ remodel housing for use with H3 3" series trims. For installation from below the ceiling.
5" [127mm] 3 H3 Series – Low Voltage MR16 Non-IC Housing 3-3/4" [95mm] Ceiling opening INCH 1/2" [13mm] H36LVTAT 5" [127mm] 5-1/4" [133mm] 1/2" [13mm] 3-3/4" [95mm] Ceiling opening 10" [254mm] H36LVTAT 3" Non-IC, Air-Tite, Shallow New Construction, 120V – 12V Low Voltage, MR16 H36LVTAT is a Non-IC, Air-Tite™ housing for use with H3 3" series trims. Housing is Air-Tite to restrict airflow between conditioned spaces and unconditioned areas. For use with 12V MR16 lamps.
5" [127mm] 3 H3 Series – Low Voltage MR16 Non-IC Housing 1/2" [13mm] 3-3/4" [95mm] Ceiling opening H36LVTATCP 5" [127mm] H36LVTATCP 5-1/4" [133mm] 1/2" [13mm] 3-3/4" [95mm] Ceiling opening INCH 10" [254mm] 5-1/4" [133mm] 3" Non-IC, Air-Tite, Shallow New Construction, Chicago Plenum, 120V – 12V Low Voltage, MR16 H36LVTATCP is a Non-IC, Air-Tite, housing designed for non-insulated Chicago Plenum ceilings. For use with 12V MR16 lamps.
5" [127mm] 3 H3 Series – Low Voltage MR16 Non-IC Housing INCH 1/2" [13mm] 3-3/4" [95mm] Ceiling opening to match template supplied H36LVRTAT Top View 5" [127mm] 3-5/8" [92mm] 9-7/8" [251mm] 1/2" [13mm] 3-3/4" [95mm] Ceiling opening to match template supplied Top View H36LVRTAT 3-5/8" [92mm] 3" Non-IC, Air-Tite, Shallow Remodel, 120V – 12V Low Voltage, MR16 Special Features H36LVRTAT is a Non-IC, Air-Tite™ remodel housing for use with H3 3" series trims.
5" [127mm] 3 3-3/4" [95mm] Ceiling opening 1/2" [13mm] H3 Series – Low Voltage MR16 Non-IC Housing INCH H36LVTAT277 5" [127mm] 3-3/4" [95mm] Ceiling opening 5-1/4" [133mm] 1/2" [13mm] 10-3/4" [273mm] H36LVTAT277 3" Non-IC, Air-Tite, Shallow New Construction, 120/277V – 12V Low Voltage, MR16 H36LVTAT277 is a Non-IC, Air-Tite housing for use with H3 3" series trims. Housing is Air-Tite to restrict airflow between conditioned spaces and unconditioned areas. For use with 12V MR16 lamps.
[127mm] 3 H3 Series – Low Voltage MR16 Non-IC Housing INCH 3-3/4" [95mm] Ceiling opening to match template supplied H36LVRTAT277 5" [127mm] 1/2" [13mm] 3-5/8" [92mm] 10-1/2" [267mm] 1/2" [13mm] 3-3/4" [95mm] Ceiling opening to match template supplied H36LVRTAT277 3" Non-IC, Air-Tite, Shallow Remodel, 120/277V – 12V Low Voltage, MR16 H36LVRTAT277 is a Non-IC, Air-Tite housing for use with H3 3" series trims. For installation from below the ceiling.
3 H3 Series Trims INCH Non-IC Housings: H36TAT • H36RTAT • H36LVTAT • H36LVTATCP • H36LVRTAT • H36LVTAT277 • H36LVRTAT277 Reflectors 3004 Adjustable Reflector • • • Die cast trim ring with reflector For general illumination 35° tilt, 360° orientation within housing Lamp 120V GU10 50W 12V MR16 50W Housing H36RTAT H36TAT H36LVRTAT H36LVRTAT277 H36LVTAT H36LVTAT277 H36LVTATCP CO 3004WHW White Reflector, White Trim 3004WHC Clear Reflector, White Trim OD 3004WHH Haze Reflector, White Trim 3004SN
3 H3 Series Trims INCH Non IC Housings: H36TAT • H36RTAT • H36LVTAT • H36LVTATCP • H36LVRTAT • H36LVTAT277 • H36LVRTAT277 Adjustable – Eyeballs & Gimbals 3009 Adjustable Gimbal - 35° Tilt • • • Die cast trim ring with die cast gimbal For directional accent lighting 35° tilt, 15° negative tilt, 360° gimbal orientation and trim within housing Lamp 120V GU10 50W 12V MR16 50W Housing H36RTAT H36TAT H36LVRTAT H36LVRTAT277 H36LVTAT H36LVTAT277 H36LVTATCP CO 3009WHWB White Baffle, White Gimbal 3009WH
3 H3 Series Trims INCH Non-IC Housings: H36TAT • H36RTAT • H36LVTAT • H36LVTATCP • H36LVRTAT • H36LVTAT277 • H36LVRTAT277 Lenses & Wet Location Showerlights 3007 Regressed Lens Adjustable Reflector • • • • • • Die cast trim ring: TBZ models Non-conductive & non-corrosive polymer trim ring: WHC, PCC, SN models Regressed clear lens For general illumination Wet location listed for showers 15° tilt, 360° orientation within housing Lamp 120V GU10 50W 12V MR16 50W Housing H36RTAT H36TAT H36LVRTAT H36LV
3 H3 Series Trims INCH Non-IC Housings: H36TAT • H36RTAT • H36LVTAT • H36LVTATCP • H36LVRTAT • H36LVTAT277 • H36LVRTAT277 Pinhole, Slot & Wall Wash 3001 Adjustable Pinhole Baffle • • • Die cast trim ring with black oculus and machined metal baffle For concentrated accent lighting 15° tilt, 360° orientation within housing Lamp 120V GU10 50W 12V MR16 50W Housing H36RTAT H36TAT H36LVRTAT H36LVRTAT277 H36LVTAT H36LVTAT277 H36LVTATCP CO 3001WHWB White Baffle, White Trim 3001WHBB Black Baffle, White
4 4” E44 LED Lamp INCH Low Voltage Housings ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ Line Voltage Housings ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ Wafer Thin Trims ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ Full Overlap Trims ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 166 168 170 174 4" E26 Screw Base IC Housings & Trims ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 180 Non-IC Housings & Trims ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
E44 Series 4-inch Pin Base Housings & Trims A family of 4-inch housings and trims optimized for use with LED lamps delivering longer life and energy savings. The ultrashallow housings are available in new construction and remodel types suitable for 2x4 framing or shallow plenum installation. The compact plaster frame with repositionable junction box fits in tight spacing. The line voltage housings with GU10 base are available in 10 or 20 watt ratings and can be used with LED or halogen lamp types.
Trim Features Wafer thin trims Full overlap trims The E44 wafer thin trims are used with the new construction housings. The 1.0 mm thin profile provides minimal ceiling presence. The E44 full overlap trims are used with both new construction and remodeler housings. The full overlap flange style trims match the ML4 trim series. The full overlap flange style trims are supplied with E26 to GU10 adapters for use with Halo H99 or compatible housings. 1.0 mm 3.0 mm Lamp Installation and adjustment 1.
4 3-13/32” [86.5mm] E44 Series - Pin Base Housing INCH E44MR16ICAT 4-1/4” [108mm] 9-9/32” [235.7mm] 3-13/32” [86.5mm] 6-5/8” [168.4mm] 4-1/4” [108mm] 9-9/32” [235.7mm] E44MR16ICAT Gx5.3 4" Ultra-Shallow Recessed Low Voltage New Construction Housing 6-5/8” [168.4mm] Recessed 4” aperture ultra-shallow new construction housing with integral step down transformer optimized for low voltage LED MR16 lamps.
4 4-13/16” [122.24mm] E44 Series - Pin Base Housing INCH E44MR16RICAT 8-3/4” [222.25mm] 4-13/16” [122.24mm] 3-7/8” [98.43mm] 8-3/4” [222.25mm] E44MR16RICAT Gx5.3 4” Ultra-Shallow Recessed Low Voltage Remodeler Housing 3-7/8” [98.43mm] Recessed 4” aperture ultra-shallow install from below remodeler type housing with integral step down transformer optimized for low voltage LED MR16 lamps.
4 3-13/32” [86.5mm] E44 Series - Pin Base Housing INCH E44PAR16ICAT 4-1/4” [108mm] 9-9/32” [235.7mm] 3-13/32” [86.5mm] 6-5/8” [168.4mm] 4-1/4” [108mm] 9-9/32” [235.7mm] E44PAR16ICAT GU10 4” Ultra-Shallow Recessed Line Voltage New Construction Housing Recessed 4” aperture ultra-shallow new construction housing optimized for line voltage LED or halogen PAR16 lamps.
4 4-13/16” [122.24mm] E44 Series - Pin Base Housing INCH E44PAR16RICAT 8-3/4” [222.25mm] 4-13/16” [122.24mm] 3-7/8” [98.43mm] 8-3/4” [222.25mm] E44PAR16RICAT GU10 4” Ultra-Shallow Recessed Line Voltage Remodeler Housing 3-7/8” [98.43mm] Special Features Recessed 4” aperture ultra-shallow install from below remodeler Quick Connect™ push wire nuts type housing for line voltage LED or halogen PAR16 lamps.
4 E44 Series - Wafer Thin Trims INCH Directional Open: 1430 • 1431 • 1434 Directional Open 1430 Conical Reflector • • • • Use in new construction housings For general illumination 1.0 mm thin profile provides minimal ceiling presence 35° tilt, 360° orientation within housing Lamp Gx5.
4 E44 Series - Wafer Thin Trims INCH Directional Open: 1435 • 1464 • 1465 Directional Open 1435 Round Pinhole with Oculus • • • • Use in new construction housings For general illumination 1.0 mm thin profile provides minimal ceiling presence 35° tilt, 360° orientation within housing Lamp Gx5.
4 E44 Series - Wafer Thin Trims INCH Directional Lens: 1433 • 1437 • 1467 Directional Lens 1433 Conical Refector, Diffuse Lens • • • • Use in new construction housings For general illumination 1.0 mm thin profile provides minimal ceiling presence 35° tilt, 360° orientation within housing Lamp Gx5.
4 E44 Series - Wafer Thin Trims INCH Lens Wall Wash: 1432 • 1436 • 1466 Lens Wall Wash 1432 Angle Cut Conical Reflector, Lens Wall Wash • • • • Use in new construction housings For general illumination 1.0 mm thin profile provides minimal ceiling presence 35° tilt, 360° orientation within housing Lamp Gx5.3 12V MR16 120V GU10 PAR16 Housing E44MR16ICAT E44PAR16ICAT H A OD 1432MWWF Matte White, White Flange 1432H Haze 1432HWF Haze, White Flange Dimensions** A: 3.63” [92mm] H: 2.
4 E44 Series - Full Overlap Trims INCH Directional Open: 1440 • 1441 • 1444 Directional Open 1440 Conical Reflector • • • • Use in new construction and remodeler housings For general illumination Full overlap flange style trims match the ML4 trim series 35° tilt, 360° orientation within housing Lamp Gx5.
4 E44 Series - Full Overlap Trims INCH Directional Open: 1445 • 1484 • 1485 Directional Open 1445 Round Pinhole with Oculus • • • • Use in new construction and remodeler housings For general illumination Full overlap flange style trims match the ML4 trim series 35° tilt, 360° orientation within housing Lamp Gx5.
4 E44 Series - Full Overlap Trims INCH Directional Lens: 1443 • 1447 • 1449 Directional Lens 1443 Conical Reflector, Diffuse Lens • • • • Use in new construction and remodeler housings For general illumination Full overlap flange style trims match the ML4 trim series 35° tilt, 360° orientation within housing Lamp Gx5.
4 E44 Series - Full Overlap Trims INCH Directional Lens: 1487 • 1489 Directional Lens 1487 Square Pinhole, Diffuse Lens • • • • Use in new construction and remodeler housings For general illumination Full overlap flange style trims match the ML4 trim series 35° tilt, 360° orientation within housing Lamp Gx5.
4 E44 Series - Full Overlap Trims INCH Lens Wall Wash: 1442 • 1446 • 1486 Lens Wall Wash 1442 Single Cut Conical Reflector, Lens Wall Wash • • • • Use in new construction and remodeler housings For general illumination Full overlap flange style trims match the ML4 trim series 35° tilt, 360° orientation within housing Lamp Gx5.
4 INCH photography: Jeffrey A. Davis Photography, Inc.
4 5-1/2" [140mm] E26 Screw Base IC Housing INCH H99ICAT 4-3/8" [111mm] Ceiling opening 5-1/2" [140mm] 4-3/8" [111mm] Ceiling opening H99ICAT 1/2" [13mm] 8-1/2" [216mm] 1/2" [13mm] 5-1/4" [133mm] 8-1/2" [216mm] 4" IC, Air-Tite, Shallow New Construction Housing, 120V The H99ICAT is an IC Air-Tite™ housing for accent, task, and general lighting. It is designed for use in insulated ceilings where it will be in direct contact with insulation*.
5-1/2" [140mm] E26 Screw Base IC Housing 4 1/2" [13mm] 4-1/2" [114mm] Ceiling opening E4ICATSB INCH 5-1/2" [140mm] 5-1/4" [133mm] 8" [203mm] 1/2" [13mm] 4-1/2" [114mm] Ceiling opening E4ICATSB 5-1/4" [133mm] 4" IC, Air-Tite, Shallow New Construction Housing, 120V The E4ICATSB is an IC Air-TiteTM housing optimized and listed for EISA compliant tungsten-halogen lamps, CFL and LED lamps as well as incandescent.
4 E26 Screw Base Trims INCH IC Housings: H99ICAT • E4ICATSB Reflectors 999 Precision Metal Reflector • • • Precision die cast metal trim ring with metal reflector For general down lighting Friction clip retention Housings Max Lamp Compatibility H99ICAT 40W A19, 50W PAR20, 40W R16, 50W R20 E4ICATSB 40W A19, 50W PAR20, 40W R16, 30 R20 999MB Specular Black Reflector, White Trim 999RG Residential Gold Reflector, White Trim 999P Specular Clear Reflector, White Trim 999W White Reflector, White Trim
4 E26 Screw Base Trims INCH IC Housings: H99ICAT • E4ICATSB 4001 Plastic Baffle • • • Step plastic baffle Formed metal trim ring Friction clip retention Housings Max Lamp Compatibility H99ICAT 35W PAR20, 50W R20, (50W PAR20, 50W R20 with H1999 Socket Extender) E4ICATSB 35W PAR20, 30W R20 Dimensions** H: 1-1/8" [28mm] OD: 5" [129mm] H 4001WB White Baffle, White Trim OD 4001BB Black Baffle, White Trim Accessory - H1999 (H99ICAT Only) Socket Extender Compatible with Halogen, Incandescent, LED*
4 INCH E26 Screw Base Trims IC Housings: H99ICAT • E4ICATSB 4002 White Eyeball – 30° Tilt • • • Adjustable eyeball for R16 and PAR16 lamps only Formed metal trim ring Friction clip retention Housings Max Lamp Compatibility H99ICAT 40W R16 E4ICATSB 40W R16, 45W PAR16 Dimensions** A: 2-1/8" [54mm] OD: 5" [129mm] 4002 White Eyeball, White Trim A OD Compatible with Halogen, Incandescent, LED* or CFL* lamps Lenses & Wet Location Showerlights 951 Prismatic Glass Lens with Full Cone Reflector • • • •
4 5" [127mm] E26 Screw Base Non-IC Housing H99TAT 1/2" INCH [13mm] 4-3/8" [111mm] Ceiling opening 5" [127mm] 5-1/4" [133mm] 8" [203mm] 1/2" [13mm] 4-3/8" [111mm] Ceiling opening H99TAT 5-1/4" [133mm] 4" Non-IC, Air-Tite, Shallow New Construction Housing, 120V The H99TAT is a Non-IC Air-Tite™ housing for providing accent, task, and general lighting. The H99T is designed for use in noninsulated ceiling but if insulation is present it MUST be kept 3" from all sides of the housing.
5" [127mm] 4 E26 Screw Base Non-IC Housing INCH 1/2" [13mm] 4-1/4" [108mm] H99RTAT 5" [127mm] 4-5/8" [116mm] 1/2" [13mm] 4-1/4" [108mm] H99RTAT Ceiling opening to match template supplied 11-7/8" [302mm] Ceiling opening to match template supplied 4-5/8" [116mm] 4" Non-IC, Shallow Remodel Housing, 120V The H99RTAT is a Non-IC Air-Tite™ housing for providing accent, task, and general lighting. The H99RTAT is designed for use in non-insulated existing ceilings.
[127mm] 4 1/2" [13mm] 4-1/2" [114mm] Ceiling opening E26 Screw Base Non-IC Housing INCH E4TATSB 5" [127mm] 5-1/4" [133mm] 8" [203mm] 1/2" [13mm] 4-1/2" [114mm] Ceiling opening E4TATSB 4" Non-IC, Air-Tite, Shallow New Construction Housing, 120V The E4TATSB is a Non-IC Air-Tite housing optimized and listed for EISA compliant tungsten-halogen lamps, CFL and LED lamps, as well as incandescent. Housing features an adjustable socket bracket, and is suitable for residential or commercial applications.
[127mm] 4 E26 Screw Base Non-IC Housing INCH 4-1/4" [108mm] E4RTATSB 5" [127mm] Ceiling opening to match template supplied 4-5/8" [116mm] 11-1/2" [292mm] 4-1/4" [108mm] Ceiling opening to match template supplied E4RTATSB 4" Non-IC, Air-Tite, Shallow Remodel Housing, 120V The E4RTATSB is a remodel Non-IC Air-TiteTM housing optimized and listed for EISA compliant tungsten-halogen lamps, CFL and LED lamps as well as incandescent.
4 E26 Screw Base Trims INCH Non-IC Housings: H99TAT • H99RTAT • E4TATSB • E4RTATSB Reflectors 999 Precision Metal Reflector • • • Precision die cast metal trim ring with metal reflector For general down lighting Friction clip retention Housings H99TAT H99RTAT Max Lamp Compatibility 40W R16, 50W R20, 50W PAR20 E4TATSB 40W R16, 50W R20 E4RTATSB 40W R16, 50W R20, 50W PAR20 999MB Specular Black Reflector, White Trim 999RG Residential Gold Reflector, White Trim 999P Specular Clear Reflector, White
4 E26 Screw Base Trims INCH Non-IC Housings: H99TAT • H99RTAT • E4TATSB • E4RTATSB 992 Wall Wash with Coilex® Baffle • • • • • Eyelid wall wash Coilex® phenolic baffle Precision die metal cast trim ring 360° rotation in housing allows trim to be aimed at wall Friction clip retention Housings Max Lamp Compatibility H99TAT 40W A19, 40W R16, 50W R20 H99RTAT 40W A19, 50W PAR20, 40W R16, 50W R20 E4TATSB 40W A19, 50W PAR20 E4RTATSB 50W PAR20 992W White Eyelid and Baffle, White Trim 992P White Ey
4 E26 Screw Base Trims INCH Non-IC Housings: H99TAT • H99RTAT • E4TATSB • E4RTATSB 4013 Full Cone Metal Baffle, Self-flange • • • Self-flange metal baffle Friction clip retention For use with H99 series housings only Housings Max Lamp Compatibility H99TAT 4013WB: 40W A19, 50W PAR20, 50W R20 4013BB: 50W PAR20, 45W R20 H99RTAT Dimensions** H 4013WB White Baffle, White Trim 4013BB Black Baffle, White Trim H: 4-1/2" [114mm] OD: 5" [129mm] OD Compatible with Halogen, Incandescent, LED* or CFL* lam
4 E26 Screw Base Trims INCH Non-IC Housings: H99TAT • H99RTAT • E4TATSB • E4RTATSB Lenses & Wet Location Showerlights 951 Prismatic Glass Lens with Full Cone Reflector • • • • • • • Wet location listed for use as Showerlight Non-conductive, non-corrosive polymer trim Prismatic glass lens Full reflector for greatest light distribution Friction clip retention For use with H99 series housings only Shower trim front is non-electrically conductive "dead-front" Housings H99TAT H99RTAT H 951PS Full Reflect
7-3/8" [187mm] 7-1/8" [181mm] Low Voltage MR16 IC Housing 4-1/2" [114mm] Ceiling opening H1499ICAT 7-3/8" [187mm] 7-1/8" [181mm] 4-1/2" [114mm] Ceiling opening H1499ICAT 1/2" [13mm] 4 INCH 12-1/2" [318mm] 1/2" [13mm] 9-1/2" [241mm] 12-1/2" [318mm] 4" IC, Air-Tite, New Construction, 120V – 12V Low Voltage, MR16 Special Features Compatible Trims [241mm] Got Nail!™ bar hangers Pass-N-Thru™ bars Slide-N-Side™ junction box Quick Connect™ push wire nuts Air-Tite™ code compliant 1419 1420 9-1/2"
5" [127mm] 4 Low Voltage MR16 Non-IC Housing INCH 4-3/8" [111mm] Ceiling opening H1499TAT 1/2" [13mm] 5" [127mm] 5-1/4" [133mm] 4-3/8" [111mm] Ceiling opening 1/2" [13mm] 8" [203mm] H1499TAT 4" Non-IC, Air-Tite, Shallow New Construction, 120 – 12V Low Voltage, MR16 H1499TAT is a Non-IC Air-Tite™ housing with an integral low voltage magnetic transformer that supplies 12 volts to MR16 lamps. The H1499TAT is designed for use in non-insulated ceilings.
5" [127mm] Low Voltage MR16 Non-IC Housing 4-3/8" [111mm] Ceiling opening H1499TCP 4 1/2" [13mm] INCH 5" [127mm] 5-1/4" [133mm] 1/2" [13mm] 4-3/8" [111mm] Ceiling opening 8" [203mm] H1499TCP 4" Non-IC, New Construction, 120V/277V – 12V Low Voltage, MR16, Chicago Plenum H1499TCP is a Non-IC housing designed for non-insulated Chicago Plenum rated ceilings. H1499TCP features an integral low voltage dual-tap 120V/277V transformer that supplies 12 volts to MR16 lamps.
5-1/2" [140mm] 4 Low Voltage MR16 Non-IC Housing INCH 4-1/4" [108mm] H1499RTAT Ceiling opening to match template supplied 4-7/8" [124mm] 5-1/2" [140mm] 14-1/8" [359mm] 4-1/4" [108mm] Ceiling opening to match template supplied H1499RTAT 4-7/8" [124mm] 4" Non-IC, Shallow Remodel 120V – 12V Low Voltage, MR16 H1499RTAT is a Non-IC Air-Tite™ remodel housing with an integral low voltage magnetic transformer that supplies 12 volts to MR16 lamps.
5-1/2" [150mm] Low Voltage MR16 Non-IC Housing 4-3/8" [111mm] Ceiling opening H1499T75 5-1/2" [150mm] 4" Non-IC, New Construction, 120V/277V – 12V Low Voltage, MR16 H1499T75 is a low voltage housing for providing accent, task, and general lighting with up to 75W 12V MR16 lamps. The H1499T75 features a dual-tap transformer for 120V or 277V input. H1499T75 is for non-insulated ceilings. If installed in insulated ceilings, insulation must be kept 3 inches away from all sides of housing.
4 INCH H4 Low Voltage Trims Low Voltage Housings: H1499ICAT • H1499TAT • H1499TCP • H1499RTAT • H1499T75 Baffles 1493 Coilex® Baffle – 35° Tilt • • • • • • Precision die cast metal trim ring Coilex® phenolic baffle Provides general illumination 35° tilt Friction clip "cat paw" retention Clear cover glass included with each trim, for use with non-cover glass MR16 lamps Housings Max Lamp Compatibility H1499TAT H1499RTAT H1499ICAT H1499TCP H1499T75 1493W White Coilex Baffle, White Trim 1493P Black Coi
4 H4 Low Voltage Trims INCH Low Voltage Housings: H1499ICAT • H1499TAT • H1499TCP • H1499RTAT • H1499T75 Adjustable – Eyeballs & Gimbals 1420 Adjustable Slot Aperture – 35° Tilt • • • • • Precision die cast metal trim ring with slot aperture For directional accent lighting 35° tilt, 360° rotation Friction clip "cat paw" retention Clear cover glass included with each trim, for use with non-cover glass MR16 lamps Housings H1499TAT H1499RTAT H1499ICAT H1499TCP H1499T75 H 1420P Slot Aperture, White Trim
4 INCH H4 Low Voltage Trims Low Voltage Housings: H1499ICAT • H1499TAT • H1499TCP • H1499RTAT • H1499T75 1498 Adjustable Eyeball with Baffle – 30° Tilt • • • • • Precision die cast metal trim ring with matching finish eyeball For directional accent lighting 30° tilt, 360° rotation Friction clip "cat paw" retention Clear cover glass included with each trim, for use with non-cover glass MR16 lamps Housings Max Lamp Compatibility H1499TAT H1499RTAT H1499ICAT H1499TCP H1499T75 1498W White Eyeball, White
5 INCH 5" E26 Screw Base IC Housings ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ IC Trims ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ IC Housings – No Socket Bracket ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ IC Trims – No Socket Bracket ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ Non-IC Housings ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ Non-IC Trims ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ Non-I
5 INCH Trim # 5000 5001 5010 5014 5016 5020 5021 5051 5054 5060 5070 5071 5102 5107 5109 5110 5120 5121 5125 5126 5130 5135 5145 5146 5150 5162 5165 5175 5176 5185 5186 5222 5230 5255 202 E26 Screw Base Insulated Ceiling Housings & Trims Quick Reference – IC Style Splay Baffle Baffle Baffle Baffle Reflector Reflector Showerlight Showerlight Adjustable Adjustable Adjustable Baffle Reflector Baffle Baffle Reflector Reflector Baffle Baffle Adjustable Adjustable Open Showerlight Open Showerlight Showerlight
5 7" [178mm E26 Screw Base IC Housing INCH H5ICAT 5-3/4" [146mm] Ceiling opening 1/2" [13mm] 7-1/4" [184mm] 7" [178mm 10-1/2" [267mm] 5-3/4" [146mm] Ceiling opening H5ICAT 7-1/4" [184mm] 5" IC, Air-Tite, New Construction Housing, 120V The H5ICAT recessed housing is designed for residential and light commercial applications. H5ICAT features full-frame robust construction, feed through listing, Got Nail! bar hangers, and may support the use of higher wattage lamps.
7" [187mm] 5 E26 Screw Base IC Housing INCH 1/2" [13mm] H5RICAT 5-1/2" [140mm] Ceiling opening to match template supplied 6-1/8" [155mm] 7" [187mm] 14" [355mm] 1/2" [13mm] 5-1/2" [140mm] Ceiling opening to match template supplied H5RICAT 6-1/8" [155mm] 5" IC, Air-Tite, Remodel Housing, 120V The H5RICAT recessed housing is designed for residential and light commercial applications. H5RICAT remodel housing features robust construction and may support the use of higher wattage lamps.
6-3/4" [171mm] 5 E26 Screw Base IC Housing E5ICAT INCH 5-3/4" [146mm] Ceiling opening E5ICAT 1/2" [13mm] 6-3/4" [171mm] 5-3/4" [146mm] Ceiling opening E5ICAT 6-3/4" [172mm] 1/2" [13mm] 9-7/8" [250mm] 5" IC, Air-Tite, New Construction Housing, 120V The E5ICAT is a compact and efficient recessed housing optimized and listed for EISA compliant tungsten-halogen, CFL and LED lamps as well as incandescent. E5ICAT housing is suitable for residential or light commercial applications.
5 7" [178mm] E26 Screw Base IC Housing INCH E5RICAT 1/2" [13mm] 5-3/4" [146mm] Ceiling opening to match template supplied E5RICAT 7" [178mm] 6-1/4" [157mm] 1/2" [13mm] 5-3/4" [146mm] Ceiling opening to match template supplied E5RICAT 9-5/8" [246mm] 6-1/4" [157mm] 5" IC, Air-Tite, Remodel Housing, 120V The E5RICAT is a compact and efficient recessed housing optimized and listed for EISA compliant, tungsten-halogen, CFL and LED lamps as well as incandescent.
5-1/4" [133mm] E26 Screw Base IC Housing 5 1/2" 5-3/4" [146mm] Ceiling opening H25ICAT [13mm] INCH Top Veiw 5-1/4" [133mm] 7-1/4" [184mm] 1/2" [13mm] 5-3/4" [146mm] Ceiling opening 10-1/2" [267mm] Top Veiw H25ICAT 7-1/4" [184mm] 5" IC, Air-Tite, Shallow New Construction Housing, 120V The H25ICAT recessed housing is designed for residential and light commercial applications.
5 E26 Screw Base Trims INCH IC Housings: H5ICAT • H5RICAT • E5ICAT • E5RICAT • H25ICAT Reflectors 5020 PAR Reflector • • • • Straight precision sided trim ring (fixed, not removable) Torsion spring retention Dual socket position for BR and PAR lamps Socket supporting Housings Max Lamp Compatibility H5ICAT 75W PAR30S, 60W R30, 60W BR30 H5RICAT 50W PAR30S, 50W PAR30L, 60W BR30 E5ICAT 5020P, 5020H, 5020SC, 5020BL: 60W PAR30S, 60W BR30 5020SN, 5020TBZ: 60W PAR30S, 50W BR30 E5RICAT Compatible with
5 E26 Screw Base Trims INCH IC Housings: H5ICAT • H5RICAT • E5ICAT • E5RICAT • H25ICAT 5121 Shallow Full Cone Reflector, Self-flange • • • • Shallow full cone reflector Torsion spring retention Socket supporting Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H5ICAT H5RICAT 50W PAR30S, 75W PAR30L, E5ICAT E5RICAT 65W BR30 H25ICAT Dimensions** A: 4-3/4" [121mm] H: 5-1/3" [135mm] OD: 6-5/8" [168mm] H A OD 5121WH White Reflector, White Overs
5 INCH E26 Screw Base Trims IC Housings: H5ICAT • H5RICAT • E5ICAT • E5RICAT • H25ICAT 5016 Coilex® Baffle with Reflector • • • • Straight precision sided trim ring (fixed, not removable) Torsion spring retention Dual socket position for BR and PAR lamps Socket supporting Housings H5ICAT H5RICAT E5ICAT E5RICAT Dimensions** H 5016W White Baffle, White Trim 5016P Black Baffle, White Trim H: 6-3/4" [171mm] OD: 6-3/8" [162mm] OD Max Lamp Compatibility 60W PAR30S, 60W PAR30L, 50W BR30 60W PAR30S, 60W
5 E26 Screw Base Trims INCH IC Housings: H5ICAT • H5RICAT • E5ICAT • E5RICAT • H25ICAT 5125 Full Cone Baffle, Self-flange • • • • Full cone baffle trim Torsion springs retention Socket supporting Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H A OD 5125WB 5125BB 5125BKBB White Baffle, White Self-flange White Baffle, Black Self-flange Black Baffle, Black Self-flange H5ICAT H5RICAT 5125WB: 29W A19, 50W PAR30S, 60W PAR30L, 65W BR30 5125BB
5 E26 Screw Base Trims INCH IC Housings: H5ICAT • H5RICAT • E5ICAT • E5RICAT • H25ICAT 5071 Adjustable Eyeball 30° Tilt, Self-flange • • • • • Straight precision sided trim ring (fixed, not removable) For directional accent lighting Torsion springs retention 30° tilt - 360° rotation Socket supporting Housings Max Lamp Compatibility Dimensions** OD: 6-1/2" [165mm] 5071P White Eyeball, White Trim OD H5ICAT H5RICAT 50W PAR20, 50W R20 E5ICAT E5RICAT 50W PAR20 H25ICAT 50W PAR20, 50W R20 Compatibl
5 E26 Screw Base Trims INCH IC Housings: H5ICAT • H5RICAT • E5ICAT • E5RICAT • H25ICAT 5222 Regressed Angle Cut Adjustable Gimbal, 30º Tilt, Self-flange • • • • • • • Fully regressed gimbal Torsion spring retention 30° tilt, 360° rotation Socket supporting Angle cut - cone reflector and baffle options Accommodates tilt of gimbal in a full regressed cut cone Self-flange trim ring sized to hide gaps caused by construction tolerances Housings H5ICAT H5RICAT E5ICAT E5RICAT 5222WB White Baffle & Gimbal, Wh
5 E26 Screw Base Trims INCH IC Housings: H5ICAT • H5RICAT • E5ICAT • E5RICAT • H25ICAT 5150 Low Profile, Frosted Glass Dome Lens, Self-flange • • • • • • Low profile, frosted glass dome lens Wet location Showerlight Torsion spring retention Non-conductive "dead-front" polymer (plastic) trim and glass lens Socket supporting internal reflector Self-flange trim ring sized to hide gaps caused by construction tolerances Housings H 5150WH Frosted Glass Dome Lens with Reflector, White Plastic Self-flange
5 E26 Screw Base Trims INCH IC Housings: H5ICAT • H5RICAT • E5ICAT • E5RICAT • H25ICAT 5145 Open Wet Location, Shallow Reflector, Self-flange • • • • • Open wet location Showerlight for PAR30 outdoor rated lamps ONLY Torsion spring retention Socket supporting Self-flange trim ring sized to hide gaps caused by construction tolerances For use in standard and shallow housings Housings H 5145WH White Self-flange 5145SN Satin Nickel Self-flange 5145TBZ Tuscan Bronze Self-flange Outdoor Rated Lamp Com
5 E26 Screw Base Trims INCH IC Housings: H5ICAT • H5RICAT • E5ICAT • E5RICAT • H25ICAT 5175 Open, Wide Self-flange • • • Open trim for BR & PAR lamps Coil spring retention Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H5ICAT H5RICAT 5175WH: 39W PAR30S, 75W PAR30L, 65W BR30 E5ICAT E5RICAT 5175SN, 5175TBZ: 39W PAR30S, 60W PAR30L, 50W BR30 H 5175WH White Self-flange 5175SN Satin Nickel Self-flange 5175TBZ Tuscan Bronze Self-flange Dimens
7" [178mm 5 E26 Screw Base IC Housing – No Socket Bracket H5ICATNB INCH 1/2" 5-3/4" [146mm] Ceiling opening 7" [178mm [13mm] 7-1/4" [184mm] 10-1/2" [267mm] 5-3/4" [146mm] Ceiling opening 1/2" [13mm] H5ICATNB 5" IC, Air-Tite, New Construction Housing, No Socket Bracket, 120V 7-1/4" [184mm] The H5ICATNB recessed housing is designed for residential and light commercial applications.
5 6-3/4" [171mm] E26 Screw Base IC Housing – No Socket Bracket INCH E5ICATNB 5-3/4" [146mm] Ceiling opening E5ICATNB 6-3/4" [171mm] 5-3/4" [146mm] Ceiling opening 1/2" [13mm] 9-7/8" [250mm] 6-3/4" [172mm] 1/2" [13mm] E5ICATNB 9-7/8" [250mm] 5" IC, Air-Tite, New Construction Housing, No Socket Bracket, 120V The E5ICATNB is a compact and efficient recessed housing optimized and listed for EISA compliant, tungsten-halogen, CFL and LED lamps as well as incandescent.
5-1/4" [133mm] 5 E26 Screw Base IC Housing – No Socket Bracket 5-3/4" [146mm] Ceiling opening H25ICATNB INCH Top Veiw 5-1/4" [133mm] 7-1/4" [184mm] 1/2" [13mm] 5-3/4" [146mm] Ceiling opening 10-1/2" [267mm] Top Veiw H25ICATNB 5" IC, Air-Tite, Shallow New Construction Housing, No Socket Bracket, 120V H25ICATNB recessed housing is designed for residential and light commercial applications.
5 E26 Screw Base Trims INCH IC "NB" Housings: H5ICATNB • E5ICATNB • H25ICATNB Reflectors 5020 PAR Reflector • • • • Straight precision sided trim ring (fixed, not removable) Torsion spring retention Dual socket position for BR and PAR lamps Socket supporting integral bracket Housings Max Lamp Compatibility H5ICATNB 75W PAR30S, 60W BR30 E5ICATNB 5020P, 5020H, 5020SC, 5020BL: 60W PAR30S, 60W BR30 5020SN, 5020TBZ: 60W PAR30S, 50W BR30 Compatible with Halogen, Incandescent, LED* or CFL* lamps 5020P
5 E26 Screw Base Trims INCH IC "NB" Housings: H5ICATNB • E5ICATNB • H25ICATNB 5121 Shallow Full Cone Reflector, Self-flange • • • • Shallow full cone reflector Torsion spring retention Socket supporting Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H5ICATNB 50W PAR30S, 75W PAR30L, 65W BR30 E5ICATNB H25ICATNB Dimensions** A: 4-3/4" [121mm] H: 5-1/3" [135mm] OD: 6-5/8" [168mm] H A OD 5121WH White Reflector, White Oversize Self-flange
5 INCH E26 Screw Base Trims IC "NB" Housings: H5ICATNB • E5ICATNB • H25ICATNB 5016 Coilex® Baffle with Reflector • • • • Straight precision sided trim ring (fixed, not removable) Torsion spring retention Dual socket position for BR and PAR lamps Socket supporting Housings Max Lamp Compatibility H5ICATNB 60W PAR30S, 60W PAR30L, 50W BR30 E5ICATNB Dimensions** H 5016W White Baffle, White Trim 5016P Black Baffle, White Trim H: 6-3/4" [171mm] OD: 6-3/8" [162mm] OD Compatible with Halogen, Incandes
5 E26 Screw Base Trims INCH IC "NB" Housings: H5ICATNB • E5ICATNB • H25ICATNB 5070 Adjustable Eyeball 30° Tilt, Self-flange • • • • • Straight precision sided trim ring (fixed, not removable) For directional accent lighting Torsion spring retention 30° tilt - 360° rotation Socket supporting Housings H 5070P White Eyeball, White Trim Max Lamp Compatibility 5070SN Satin Nickel Eyeball, Satin Nickel Trim 5070TBZ Tuscan Bronze Eyeball, Tuscan Bronze Trim OD Dimensions** H5ICATNB E5ICATNB A A: 3-7
5 INCH E26 Screw Base Trims IC "NB" Housings: H5ICATNB • E5ICATNB • H25ICATNB 5135 Eyeball 35° Tilt, Self-flange • • • • • Conical adjustable eyeball trim for PAR20 lamps Torsion spring retention Socket supporting 35° tilt, 360° rotation Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H Dimensions** A: 2-3/4" [70mm] H: 2-1/4" [58mm] OD: 6-5/8" [168mm] A OD 5135WH White Eyeball, White Trim, Self-flange H5ICATNB E5ICATNB 50W PAR20 H25ICA
5 E26 Screw Base Trims INCH IC "NB" Housings: H5ICATNB • E5ICATNB • H25ICATNB Lenses & Wet Location Showerlights 5051 Frosted Glass Lens • • • • • Frosted glass lens Straight precision sided trim ring "Dead-Front" construction, wet location listed Showerlight Non-conductive, non-corrosive gasketed polymer trim ring Torsion spring retention Housings H5ICATNB E5ICATNB Dimensions** H: 5-916" [141mm] OD: 6-7/16" [164mm] H 5051PS Frosted Glass Lens, White Trim OD Max Lamp Compatibility 35W PAR30L Co
5 INCH E26 Screw Base Trims IC "NB" Housings: H5ICATNB • E5ICATNB • H25ICATNB 5162 Drop Opal Plastic Lens, Self-flange • • • • • • Drop opal plastic lens Wet location Showerlight Non-conductive "dead-front" polymer (plastic) trim Torsion spring retention Socket supporting internal reflector Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility Dimensions** H A OD 5162WH Drop Opal Plastic Lens with Reflector, White Plastic Self-flange A: 4-1/2"
5 E26 Screw Base Trims INCH IC "NB" Housings: H5ICATNB • E5ICATNB • H25ICATNB 5145 Open Wet Location, Shallow Reflector, Self-flange • • • • • Open wet location Showerlight for PAR30S and PAR30L outdoor rated lamps ONLY Torsion spring retention Socket supporting Self-flange trim ring sized to hide gaps caused by construction tolerances For use in standard and shallow housings Housings H5ICATNB E5ICATNB H25ICATNB H 5145WH White Self-flange 5145SN Satin Nickel Self-flange 5145TBZ Tuscan Bronze Self-
5 INCH E26 Screw Base Trims IC "NB" Housings: H5ICATNB • E5ICATNB • H25ICATNB 5176 Open, Wide Self-flange • • • • Open trim for BR30 & PAR30 lamps Torsion spring retention Socket supporting integral bracket Self-flange trim ring sized to hide gaps caused by construction tolerances Housings H5ICATNB E5ICATNB H25ICATNB Max Lamp Compatibility H 5176WH White Self-flange 5176SN Satin Nickel Self-flange A OD 5176TBZ Tuscan Bronze Self-flange Dimensions** 60W PAR30S, 60W PAR30L, 50W BR30 A: 3-7/8" [9
5 E26 Screw Base Non-Insulated Ceiling Housings & Trims INCH Quick Reference – Non-IC Trim # 5000 5001 5010 5012 5016 5020 5021 5030 5051 5054 5060 5070 5071 5102 5107 5109 5110 5120 5125 5130 5135 5145 5146 5150 5162 5165 5175 5176 5185 5186 5222 5230 5255 Style Splay Baffle Baffle Baffle Baffle Reflector Reflector Wall Wash Showerlight Showerlight Adjustable Adjustable Adjustable Baffle Reflector Baffle Baffle Reflector Baffle Adjustable Adjustable Open Showerlight Open Showerlight Showerlight Showerl
5 7" [178mm] E26 Screw Base Non-IC Housing INCH H5T 5-3/4" [140mm] Ceiling opening 7" [178mm] 5-3/4" [140mm] Ceiling opening 1/2" [13mm] 7-1/4" [184mm] 10-1/2" [267mm] 1/2" [13mm] H5T 5" Non-IC, New Construction Housing, 120V The H5T recessed housing is designed for residential and light commercial applications. H5T features full-frame robust construction, feed through listing, Got Nail! bar hangers, and may support the use of higher wattage lamps.
7" [178mm] E26 Screw Base Non-IC Housing 1/2" [13mm] H5RT 5 5-1/2" [140mm] INCH Ceiling opening to match template supplied 6-1/8" [155mm] 7" [178mm] 14" [356mm] 1/2" [13mm] 5-1/2" [140mm] Ceiling opening to match template supplied H5RT 6-1/8" [155mm] 5" Non-IC, Remodel Housing, 120V The H5RT recessed housing is designed for residential and light commercial applications. H5RT remodel housing features robust construction and may support the use of higher wattage lamps.
E5TAT 6-3/4" [171mm] 5 E26 Screw Base Non-IC Housing INCH E5TAT 5-3/4" [146mm] Ceiling opening 1/2" [13mm] E5TAT 6-3/4" [171mm] 5-3/4" [146mm] Ceiling opening E5TAT 6-3/4" [172mm] 1/2" [13mm] 9-7/8" [250mm] 5" Non-IC, Air-Tite, New Construction Housing, 120V The E5TAT is a compact and efficient recessed housing optimized and listed for EISA compliant, tungsten-halogen, CFL and LED lamps as well as incandescent.
5 7" [178mm] E26 Screw Base Non-IC Housing INCH E5RTAT 5-3/4" [146mm] 1/2" [13mm] Ceiling opening to match template supplied 7" [178mm] 5-3/4" [146mm] 6-1/4" [157mm] 1/2" [13mm] 9-5/8" [246mm] Ceiling opening to match template supplied E5RTAT 6-1/4" [157mm] 5" Non-IC, Air-Tite, Remodel Housing, 120V The E5RTAT is a compact and efficient recessed housing optimized and listed for EISA compliant, tungsten-halogen, CFL and LED lamps as well as incandescent.
5 E26 Screw Base Trims INCH Non-IC Housings: H5T • H5RT • E5TAT • E5RTAT Reflectors 5020 PAR Reflector • • • • Straight precision sided trim ring (fixed, not removable) Torsion spring retention Dual socket position for BR and PAR lamps Socket supporting Housings Max Lamp Compatibility H5T 75W PAR30S, 75W PAR30L, 65W BR30, 75W R30 H5RT E5TAT E5RTAT 5020P White Reflector, White Trim 5020H Haze Reflector, White Trim 5020BL Black Specular Reflector, White Trim Dimensions** H: 3-1/4" [82mm] OD: 6
5 E26 Screw Base Trims INCH Non-IC Housings: H5T • H5RT • E5TAT • E5RTAT Baffles 5001 PAR Metal Baffle Splay • • • • Straight precision sided trim ring (fixed, not removable) Torsion spring retention Dual socket position for BR and PAR lamps Socket supporting Housings Max Lamp Compatibility H5T 50W PAR20, 75W PAR30S, 75W PAR30L, 65W BR30, 50W R20, 75W R30 H5RT E5TAT E5RTAT 5001P White Baffle, White Trim 5001MB Black Baffle, White Trim 5001SN Satin Nickel Baffle, Satin Nickel Trim 5001TBZ Tusc
5 E26 Screw Base Trims INCH Non-IC Housings: H5T • H5RT • E5TAT • E5RTAT 5102 Tapered Metal Baffle, Self-flange • • • IC Contoured tapered sides of metal baffle for BR30 and PAR30 lamps Coil spring retention Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H5T 75W PAR30S, 75W PAR30L, 65W BR30 H5RT E5TAT E5RTAT Dimensions** A: 4-3/4" [121mm] H: 2-3/8" [60mm] OD: 6-5/8" [168mm] H A OD 5102WB 5102BB White Baffle, White Self-flange Black
5 E26 Screw Base Trims INCH Non-IC Housings: H5T • H5RT • E5TAT • E5RTAT 5070 Adjustable Eyeball 30° Tilt, Self-flange • • • • • Straight precision sided trim ring (fixed, not removable) For directional accent lighting Torsion spring retention 30° tilt - 360° rotation Socket supporting Housings H5T H5RT E5TAT E5RTAT H 5070P White Eyeball, White Trim Max Lamp Compatibility 5070SN Satin Nickel Eyeball, Satin Nickel Trim 5070TBZ Tuscan Bronze Eyeball, Tuscan Bronze Trim A OD Dimensions** A: 3-7
5 E26 Screw Base Trims INCH Non-IC Housings: H5T • H5RT • E5TAT • E5RTAT 5165 Gimbal 35° Tilt, Self-flange • • • • • Adjustable gimbal trim for PAR30S (short-neck) lamps Torsion spring retention Socket supporting bracket 35° tilt, 360° rotation Self-flange trim ring sized to hide gaps 5165WH caused by construction tolerances Housings H5T Max Lamp Compatibility H5RT E5TAT E5RTAT White Gimbal, White Trim 5165BK Black Gimbal, Black Trim 5165SN Satin Nickel Gimbal, Satin Nickel Trim 5165TBZ Tuscan
5 E26 Screw Base Trims INCH Non-IC Housings: H5T • H5RT • E5TAT • E5RTAT 5145 Open Wet Location, Shallow, Self-flange • • • • • Open wet location Showerlight for PAR30S and PAR30L outdoor rated lamps ONLY Torsion spring retention Socket supporting Self-flange trim ring sized to hide gaps caused by construction tolerances For use only in standard and shallow housings Housings H5T H5RT E5TAT E5RTAT H 5145WH White Self-flange Max Lamp Compatibility 5145SN Satin Nickel Self-flange 5145TBZ Tuscan Br
5 E26 Screw Base Trims INCH Non-IC Housings: H5T • H5RT • E5TAT • E5RTAT 5230 Squircle Frost Glass Lens, Metal Trim, Self-flange • • • • • • Low profile frost glass lens Wet location Showerlight Torsion spring retention Self-flange low profile metal trim ring Socket supporting internal bracket Integral rotation adjustment up to +/– 25˚ for precise alignment with room Housings Max Lamp Compatibility H5T Consult website www.cooperlighting.
5 E26 Screw Base Trims INCH Non-IC Housings: H5T • H5RT • E5TAT • E5RTAT 5176 Open, Wide Self-flange • • • • Open trim for BR & PAR lamps Torsion spring retention Socket supporting integral bracket Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H5T 75W PAR30S, 75W PAR30L, 65W BR30 H5RT E5TAT E5RTAT H 5176WH White Self-flange 5176SN Satin Nickel Self-flange 5176TBZ Tuscan Bronze Self-flange A OD Dimensions** A: 3-7/8" [99mm] H: 4-3/
7" [178mm] 5 E26 Screw Base Non-IC Housing – No Socket Bracket INCH H5TNB 5-3/4" [146mm] Ceiling opening 7" [178mm] 5-3/4" [146mm] Ceiling opening 1/2" [13mm] 7-1/4" [184mm] 10-1/2" [267mm] 1/2" [13mm] H5TNB 7-1/4" [184mm] 5" Non-IC, New Construction Housing, No Socket Bracket, 120V The H5TNB recessed housing is designed for residential and light commercial applications.
E26 Screw Base Non-IC Housing – No Socket Bracket 6-3/4" [171mm] 5 INCH E5TATNB 5-3/4" [146mm] Ceiling opening 1/2" [13mm] 6-3/4" [171mm] 9-7/8" [250mm] 5-3/4" [146mm] Ceiling opening 1/2" [13mm] 6-3/4" [172mm] E5TATNB 9-7/8" [250mm] 5" Non-IC, Air-Tite, New Construction Housing, No Socket Bracket, 120V The E5TATNB is a compact and efficient recessed housing optimized and listed for EISA compliant, tungsten-halogen, CFL and LED lamps as well as incandescent.
5 E26 Screw Base Trims INCH Non-IC "NB" Housings: H5TNB • E5TATNB Reflectors 5020 PAR Reflector • • • • Straight precision sided trim ring (fixed, not removable) Torsion spring retention Dual socket position for BR and PAR lamps Socket supporting integral bracket Housings Max Lamp Compatibility H5TNB 75W PAR30S, 75W PAR30L, 65W BR30, 75W R30 E5TATNB 75W PAR30S, 75W PAR30L, 65W BR30 Compatible with Halogen, Incandescent, LED* or CFL* lamps 5020P White Reflector, White Trim 5020H Haze Reflector,
5 E26 Screw Base Trims INCH Non-IC "NB" Housings: H5TNB • E5TATNB Baffles 5001 PAR Metal Baffle Splay • • • • Straight precision sided trim ring (fixed, not removable) Torsion spring retention Dual socket position for BR and PAR lamps Socket supporting Housings Max Lamp Compatibility H5TNB 50W PAR20, 75W PAR30S, 75W PAR30L, 65W BR30, 50W R20, 75W R30 E5TATNB 5001P White Baffle, White Trim 5001MB Black Baffle, White Trim 5001SN Satin Nickel Baffle, Satin Nickel Trim 5001TBZ Tuscan Bronze Baffle
5 INCH E26 Screw Base Trims Non-IC "NB" Housings: H5TNB • E5TATNB 5125 Full Cone Baffle, Self-flange • • • • Full cone baffle trim Torsion spring retention Socket supporting Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H5TNB 60W A19, 75W PAR30S, 75W PAR30L, 65W BR30 E5TATNB H A OD 5125WB 5125BB 5125BKBB White Baffle, White Self-flange White Baffle, Black Self-flange Black Baffle, Black Self-flange Dimensions** A: 4-3/4" [121mm] H: 6
5 E26 Screw Base Trims INCH Non-IC "NB" Housings: H5TNB • E5TATNB 5130 Eyeball 35° Tilt, Self-flange • • • • • Adjustable 35° tilt, 360° rotation Design optimized for PAR30S (short-neck) lamps Torsion spring retention Socket supporting Self-flange trim ring sized to hide gaps caused by construction tolerances Housings H5TNB E5TATNB Max Lamp Compatibility Dimensions** H A: 3-7/8" [98mm] H: 2-1/4" [58mm] OD: 6-5/8" [168mm] A 5130WH White Eyeball, White Trim OD 75W PAR30S Compatible with Halogen,
5 INCH E26 Screw Base Trims Non-IC "NB" Housings: H5TNB • E5TATNB Lenses & Wet Location Showerlights 5051 Frosted Glass Lens - Showerlight • • • • • Straight precision sided trim ring Frosted glass lens "Dead-Front" construction, wet location listed Showerlight Non-conductive, non-corrosive gasketed polymer trim ring Torsion spring retention Housings Max Lamp Compatibility H5TNB 60W A19, 50W PAR30S, 50W PAR30L, 65W BR30 E5TATNB Dimensions** H: 5-9/16" [141mm] OD: 6-7/16" [164mm] H 5051PS Froste
5 E26 Screw Base Trims INCH Non-IC "NB" Housings: H5TNB • E5TATNB 5150 Low Profile, Frosted Glass Dome Lens, Self-flange • • • • • • Low profile, frosted glass dome lens Wet location Showerlight Torsion spring retention Non-conductive "dead-front" polymer (plastic) trim and glass lens Socket supporting internal reflector Self-flange trim ring sized to hide gaps caused by construction tolerances Housings H5TNB E5TATNB H 5150WH Frosted Glass Dome Lens with Reflector, White Plastic Self-flange 5150SN
5 INCH E26 Screw Base Trims Non-IC "NB" Housings: H5TNB • E5TATNB Open, Splay & Wall Wash 5000 PAR Metal Splay, Self-flange • • • • • Straight precision sided trim ring (fixed, not remodeled) Open metal splay trim Dual socket position socket for BR and PAR lamps Torsion spring retention Socket supporting Housings Max Lamp Compatibility H5TNB 75W PAR30S, 75W PAR30L, 65W BR30, 75W R30 E5TATNB 75W PAR30S, 75W PAR30L, 65W BR30 H 5000P White Splay, White Trim 5000SN Satin Nickel Splay, Satin Nickel
6 INCH 6 INCH 6" E26 Screw Base IC Housings ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 254 IC Trims ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 260 H7UICAT Housings & Trims ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 272 IC Housings – No Socket Bracket ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 285 IC Trims – No Socket Bracket ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 288 IC Shallow Housings ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
6 E26 Screw Base Insulated Ceiling Housings & Trims INCH Quick Reference – IC Trim Series # 30 70 71 73 74 76 78 79 170 171 172 173 300 310 327 328 353 376 378 404 419 420 424 425 426 429 430 478 4041 4261 30SBAT 6100 6101 6102 6103 6106 6107 6108 6109 6110 6120 6121 6125 6126 6130 6145 6146 6150 6160 6162 6170 6215 6222 6230 6255 252 Style Reflector & Baffle Showerlight Showerlight Showerlight Adjustable Adjustable Adjustable Pinhole Showerlight Showerlight Showerlight Showerlight Open Baffle Splay S
E26 Screw Base Insulated Ceiling Housings & Trims Quick Reference – IC Trim Series # 30 74 76 78 170 171 172 173 300 310 327 328 353 376 378 404 420 426 429 430 478 4041 4261 30SBAT 6100 6101 6102 6103 6106 6107 6108 6109 6110 6120 6121 6125 6126 6130 6145 6146 6150 6162 6170 6215 6222 6230 6255 Style Reflector & Baffle Adjustable Adjustable Adjustable Showerlight Showerlight Showerlight Showerlight Open Baffle Splay Splay Baffle Adjustable Adjustable Reflector Reflector Reflector Reflector Wall Wash Adjus
7" [178mm] 6 E26 Screw Base IC Housing INCH H7ICT 6-1/2" [165mm] Ceiling opening 1/2" [13mm] 7" [178mm] 6-1/2" [165mm] Ceiling opening 7-1/2" [191mm] 1/2" [13mm] 10-1/2" [267mm] H7ICT 6" IC, New Construction, 120V The H7 recessed housing is the standard in the industry for both light commercial and residential applications. H7 series features full-frame design, robust construction, feed-through listing, Got Nail! bar hangers; and may support use of higher wattage lamps.
7" [178mm] 6 E26 Screw Base IC Housing H7ICAT 1/2" [13mm] INCH 6-1/2" [165mm] Ceiling opening 7" [178mm] 7-1/2" [191mm] 1/2" [13mm] 6-1/2" [165mm] Ceiling opening 10-1/2 [267mm] H7ICAT 6" IC, Air-Tite, New Construction, 120V The H7 recessed housing is the standard in the industry for both light commercial and residential applications. H7 series features full-frame design, robust construction, feed-through listing, Got Nail! bar hangers; and may support use of higher wattage lamps.
7" [178mm] 6 E26 Screw Base IC Housing INCH 6-1/4" [159mm] H7RICT 1/2" Ceiling opening to [13mm] match template supplied 6-7/8" [175mm] 7" [178mm] 6-1/4" [159mm] 1/2" Ceiling opening to [13mm] match template supplied 13-1/4" [337mm] 6-7/8" [175mm] H7RICT 6" IC, Remodel, 120V The H7 recessed remodel housing is the standard in the industry for both light commercial and residential applications.
7" [178mm] E26 Screw Base IC Housing 6 6-1/4" [159mm] H7RICAT INCH Ceiling opening to match template supplied 6-7/8" [175mm] 7" [178mm] 6-1/4" [159mm] 1/2" [13mm] Ceiling opening to match template supplied 13-1/4" [337mm] 6-7/8" [175mm] H7RICAT 6" ICAT, Air-Tite, Remodel, 120V The H7 recessed remodel housing is the standard in the industry for both light commercial and residential applications.
6-3/4" [171mm] 6 E26 Screw Base IC Housing INCH E7ICAT 6-1/2" [165mm] Ceiling opening 1/2" [13mm] 6-3/4" [171mm] 6-1/2" [165mm] Ceiling opening 10-3/8" [263mm] 7-1/4" [185mm] 1/2" [13mm] E7ICAT 6" IC, Air-Tite, New Construction Housing, 120V The E7ICAT is a compact and efficient recessed housing optimized and listed for EISA compliant tungsten-halogen, CFL and LED lamps as well as incandescent. Housing is suitable for residential or light commercial applications.
7" [178mm] 6 E26 Screw Base IC Housing E7RICAT 6-1/4" [159mm] 1/2" INCH [13mm] Ceiling opening to match template supplied 7" [178mm] 6-1/4" [159mm] 7" [178mm] 1/2" [13mm] Ceiling opening to match template supplied E7RICAT 10-1/2" [268mm] 7" [178mm] 6" IC, Air-Tite, Remodel Housing, 120V The E7RICAT is a compact and efficient recessed remodel housing optimized and listed for EISA compliant tungsten-halogen, CFL and LED lamps as well as incandescent.
6 E26 Screw Base Trims INCH IC Housings: H7ICT • H7ICAT • H7RICT • H7RICAT • E7ICAT • E7RICAT Reflectors 30 Reflector, Self-flange • • • • Self-flange reflector with torsion spring retention Accepts a wide range of lamps Makes installation Air-Tite regardless of housing used Socket supporting reflector 30HAT Housings H7ICT H7ICAT E7ICAT Max Lamp Compatibility Haze Reflector, White Trim H7RICT 60W A19, 75W PAR30S, 75W PAR30L, 65W PAR38, H7RICAT 65W BR30, 90W BR40, 75W R30 H 30RGAT Residential Gol
6 E26 Screw Base Trims INCH IC Housings: H7ICT • H7ICAT • H7RICT • H7RICAT • E7ICAT • E7RICAT 429 Dayform White Cone • • • Contoured sides shield interior view of housing Removable trim ring Accessories available: TRM6 designer trim rings, OT403 oversize trim ring Housings Max Lamp Compatibility H7ICT H7RICT H7ICAT H7RICAT E7ICAT E7RICAT Dimensions** H: 3" [76mm] OD: 7-1/4" [184mm] H 429P White Reflector, White Self-flange OD 50W PAR30S, 75W PAR30L, 65W BR30, 75W R30 50W PAR30S, 75W PAR30L
6 E26 Screw Base Trims INCH IC Housings: H7ICT • H7ICAT • H7RICT • H7RICAT • E7ICAT • E7RICAT 6120 Full Cone Reflector, Self-flange • • • • • Full cone reflector Torsion spring retention Socket supporting reflector Self-flange trim ring sized to hide gaps caused by construction tolerances Makes installation Air-Tite regardless of housing used Housings H 6120WH White Reflector, White Self-flange 6120SN Satin Nickel Reflector, Satin Nickel Self-flange 6120TBZ Tuscan Bonze Reflector, Tuscan Bronze Se
6 E26 Screw Base Trims INCH IC Housings: H7ICT • H7ICAT • H7RICT • H7RICAT • E7ICAT • E7RICAT 310 Coilex® Baffle • • • • Black or white phenolic Coilex baffle with white metal trim ring Removable trim ring Accessories available: TRM6 designer trim rings, OT403 oversize trim ring Coil spring retention Housings Max Lamp Compatibility H7ICT H7RICT H7ICAT H7RICAT 50W PAR30S, 75W PAR30L, 45W PAR38, 65W BR30, 75W R30, 85W BR40 E7ICAT E7RICAT 310W 310P 310SN White Coilex Baffle, White Trim Black Coil
6 E26 Screw Base Trims INCH IC Housings: H7ICT • H7ICAT • H7RICT • H7RICAT • E7ICAT • E7RICAT 6101 Straight Metal Baffle with (2) Trim Rings • • • IC Straight sides of metal baffle for large diameter lamps Two plastic removable trim rings included narrow 7.25" OD and wide 8.
6 E26 Screw Base Trims INCH IC Housings: H7ICT • H7ICAT • H7RICT • H7RICAT • E7ICAT • E7RICAT 6110 PerftexTM Baffle, Self-flange • • • Perforated pattern baffle contoured for BR30 and PAR30 lamps Coil spring retention Self-flange trim ring sized to hide gaps caused by construction tolerances Housings H7ICT H7RICT H7ICAT H7RICAT E7ICAT E7RICAT Max Lamp Compatibility H 6110WB White Perftex Baffle, White Self-flange 6110BB Black Perftex Baffle, White Self-flange A OD 6110BKBB Black Perftex Baff
6 E26 Screw Base Trims INCH IC Housings: H7ICT • H7ICAT • H7RICT • H7RICAT • E7ICAT • E7RICAT 76 Gimbal 30º Tilt, Self-flange • • • For use with PAR38 lamps 30° tilt Torsion spring retention Housings Max Lamp Compatibility H7ICT H7RICT H7ICAT H7RICAT E7ICAT E7RICAT Dimensions** OD: 8" [203mm] 76P White Gimbal, White Trim OD 45W PAR38 Compatible with Halogen, Incandescent, LED* or CFL* lamps 78 Eyeball 30º Tilt, Self-flange • • • • • 30° tilt, 360° rotation Torsion spring retention Wide ch
6 E26 Screw Base Trims INCH IC Housings: H7ICT • H7ICAT • H7RICT • H7RICAT • E7ICAT • E7RICAT 478 Adjustable Regressed Gimbal with Splay 25º Tilt, Self-flange • • • • • • 25° tilt Adjustable gimbal with splay trim for PAR38 lamps Removable trim ring Accessories available: TRM6 designer trim rings, OT403 oversize trim ring Friction clips on trim Socket supporting gimbal Housings H7ICT H7RICT H7ICAT H7RICAT E7ICAT E7RICAT Dimensions** OD: 7-1/4" [184mm] Friction Clips on Trim 478P White Splay, W
6 E26 Screw Base Trims INCH IC Housings: H7ICT • H7ICAT • H7RICT • H7RICAT • E7ICAT • E7RICAT 6222 Regressed Angle Cut Adjustable Gimbal, 45º Tilt, Self-flange • • • • • • • 45° tilt, 360° rotation Fully regressed gimbal – self-flange ring Torsion spring retention Socket supporting gimbal Reflector and baffle options Accommodates tilt of gimbal in a full regressed cut cone Self-flange trim ring sized to hide gaps caused by construction tolerances Housings 6222WB White Baffle, White Trim 6222BB Black
6 E26 Screw Base Trims INCH IC Housings: H7ICT • H7ICAT • H7RICT • H7RICAT • E7ICAT • E7RICAT 172 Dome Glass Lens with Reflector • • • • • Frosted glass dome Features "dead-front" construction and is wet location listed for use in showers Non-conductive, non-corrosive gasketed polymer (plastic) trim ring Torsion spring retention Air-Tite trim makes any installation Air-Tite Housings H7ICT H7ICAT H7RICT H7RICAT E7ICAT E7RICAT Dimensions** H: 2-1/8" [54mm] OD: 7-3/4" [197mm] H 172PS Frosted Gla
6 E26 Screw Base Trims INCH IC Housings: H7ICT • H7ICAT • H7RICT • H7RICAT • E7ICAT • E7RICAT 6150 Low Profile, Frosted Glass Dome Lens, Self-flange • • • • • • Low profile, frosted glass dome lens Wet location Showerlight Torsion spring retention Non-conductive "dead-front" polymer (plastic) trim ring and glass lens Socket supporting internal reflector Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H7ICT H7ICAT H7RICT H7RICAT E7ICAT E
6 E26 Screw Base Trims INCH IC Housings: H7ICT • H7ICAT • H7RICT • H7RICAT • E7ICAT • E7RICAT Open, Splay & Wall Wash 300 Open Trim with Fixed Socket Bracket • • • Open trim for BR30 and PAR30 lamps Torsion spring retention Socket supporting internal bracket Housings Max Lamp Compatibility H7ICT H7ICAT H7RICT H7RICAT 75W PAR30S, 75W PAR30L 65W BR30 E7ICAT E7RICAT H 300P Socket Bracket with White Open Trim 300SN Socket Bracket with Satin Nickel Open Trim 300TBZ Socket Bracket with Tuscan Br
6 7-1/2" [191mm] 6-3/4" [171mm] E26 Screw Base Housing INCH H7UICAT 6-1/2" [165mm] Ceiling opening 7-1/2" [191mm] 6-3/4" [171mm] 6-1/2" [165mm] Ceiling opening 1/2" [13mm] 9-1/2" [241mm] 13" [330mm] 1/2" [13mm] H7UICAT 9-1/2" [241mm] 6" IC, Air-Tite, New Construction Universal Housing, 120V The H7UICAT universal housing is designed to support the use of higher wattage lamps than single wall housings (depending upon the trim).
6 E26 Screw Base Trims INCH IC Housing: H7UICAT Reflectors 30 Reflector, Self-flange • • • • Self-flange reflector with torsion spring retention Accepts a wide range of lamps Makes installation Air-Tite regardless of housing used Socket supporting reflector 30HAT Housing Max Lamp Compatibility H7UICAT 100W A19, 75W PAR30S, 75W PAR30L, 100W PAR38, 85W BR30, 100W R30 H 30RGAT Residential Gold Reflector, White Trim Haze Reflector, White Trim 30CAT Clear Specular Reflector, White Trim OD Dimensi
6 INCH E26 Screw Base Trims IC Housing: H7UICAT 429 Dayform White Cone, Self-flange • • • Contoured sides shield interior view of housing Removable trim ring Accessories available: TRM6 designer trim rings, OT403 oversize trim ring Housing Max Lamp Compatibility H7UICAT 75W PAR30S, 75W PAR30L, 90W PAR38, 65W BR30, 90W BR40, 75W R30, 100W R40 Dimensions** H: 3" [76mm] OD: 7-1/4" [184mm] H 429P White Reflector, White Self-flange OD Compatible with Halogen, Incandescent, LED* or CFL* lamps 4041
6 E26 Screw Base Trims INCH IC Housing: H7UICAT 6120 Full Cone Reflector, Self-flange • • • • • Full cone reflector Torsion spring retention Socket supporting reflector Self-flange trim ring sized to hide gaps caused by construction tolerances Makes installation Air-Tite regardless of housing used Housing Max Lamp Compatibility H7UICAT 72W A19, 75W PAR30S, 75W PAR30L, 85W BR30, 90W PAR38, 90W BR40 H 6120WH White Reflector, White Self-flange 6120SN Satin Nickel Reflector, Satin Nickel Self-flange
6 INCH E26 Screw Base Trims IC Housing: H7UICAT 353 Metal Baffle Metallic finish trim rings and baffles Coil spring retention Removable trim ring • • • Housing Max Lamp Compatibility H7UICAT 75W PAR30S, 75W PAR30L, 90W PAR38, 65W BR30, 90W BR40, 75W R30, 100W R40 Dimensions** H: 3" [76mm] OD: 7-1/4" [184mm] 353SN Satin Nickel Baffle, Satin Nickel Trim H 353TBZ Tuscan Bronze Baffle, Tuscan Bronze Trim OD Compatible with Halogen, Incandescent, LED* or CFL* lamps 6100 Tapered Metal Baffle with (
6 E26 Screw Base Trims INCH IC Housing: H7UICAT 6103 Straight Metal Baffle, Self-flange • • • IC Straight sides of metal baffle for large diameter lamps Coil spring retention Self-flange trim ring sized to hide gaps caused by construction tolerances Housing Max Lamp Compatibility H7UICAT 75W PAR30S, 75W PAR30L, 90W PAR38, 65W BR30, 90W BR40 Dimensions** H A OD 6103WB 6103BB White Baffle, White Self-flange Black Baffle, White Self-flange A: 5-3/8" [137mm] H: 2-5/8" [68mm] OD: 7-3/4" [197mm] Com
6 INCH E26 Screw Base Trims IC Housing: H7UICAT 6126 Shallow Full Cone Baffle, Self-flange • • • • Shallow full cone baffle for A19 and PAR30 lamps Torsion spring retention Socket supporting baffle Self-flange trim ring sized to hide gaps caused by construction tolerances Housing Max Lamp Compatibility H7UICAT 72W A19, 75W PAR30S, 75W PAR30L, 85W BR30 Dimensions** H A OD 6126WB 6126BB White Baffle, White Self-flange Black Baffle, White Self-flange A: 5-3/8" [137mm] H: 4-3/8" [110mm] OD: 7-3/4" [1
6 E26 Screw Base Trims INCH IC Housing: H7UICAT 378 Regressed Gimbal with Splay 25º Tilt, Self-flange • • • • • • 25° tilt Regressed gimbal with splay trim Removable trim ring Accessories available: TRM6 designer trim rings, OT403 oversize trim ring Friction clips on trim Socket supporting gimbal Housing Max Lamp Compatibility H7UICAT 75W PAR30 Compatible with Halogen, Incandescent, LED* or CFL* lamps Dimensions** OD: 7-1/4" [184mm] 378P White Splay, White Trim 378 Specular Clear Splay, White Tr
6 INCH E26 Screw Base Trims IC Housing: H7UICAT 6222 Regressed Angle Cut Adjustable Gimbal, 45º Tilt, Self-flange • • • • • • • 45° tilt, 360° rotation Fully regressed gimbal – self-flange ring Torsion spring retention Socket supporting gimbal Reflector and baffle options Accommodates tilt of gimbal in a full regressed cut cone Self-flange trim ring sized to hide gaps caused by construction tolerances Housing Max Lamp Compatibility H7UICAT 60W PAR30S, 75W PAR30L 6222WB White Baffle, White Trim 622
6 E26 Screw Base Trims INCH IC Housing: H7UICAT 170 Albalite Lens with Reflector • • • • • White trim with Albalite glass lens PS version features non-conductive, non-corrosive gasketed polymer (plastic) trim ring PS version is "dead-front" construction and is wet location listed for use in showers Torsion spring retention PS version is Air-Tite; making any installation Air-Tite Housing Max Lamp Compatibility H7UICAT 40W A19 Dimensions** H 170P Albalite Lens, White Trim 170PS Albalite Lens, Poly
6 INCH E26 Screw Base Trims IC Housing: H7UICAT 6145 Open Wet Location, Shallow Reflector, Self-flange • • • • Open wet location shallow Showerlight for PAR30 and PAR38 outdoor rated lamps ONLY Torsion spring retention Socket supporting cone Self-flange trim ring sized to hide gaps caused by construction tolerances Housing Max Lamp Compatibility H7UICAT 75W PAR30S, 75W PAR30L, 90W PAR38 H D A OD 6145WH White Shallow Reflector, White Self-flange Compatible with Halogen, Incandescent, LED* or CFL*
6 E26 Screw Base Trims INCH IC Housing: H7UICAT 6162 Drop Opal Plastic Lens, Self-flange • • • • • Wet location Showerlight Non-conductive "dead-front" polymer (plastic) trim and lens Torsion spring retention Socket supporting internal reflector Self-flange trim ring sized to hide gaps caused by construction tolerances Housing Max Lamp Compatibility H7UICAT 29W A19 Dimensions** H A OD 6162WH Drop Opal Plastic Lens with Reflector, Frosted Plastic Self-flange A: 5-1/8" [130mm] H: 4-3/4" [122mm] OD
6 INCH E26 Screw Base Trims IC Housing: H7UICAT 300 Open Trim with Fixed Socket Bracket • • • Open trim for BR30 and PAR30 lamps Torsion spring retention Socket supporting internal bracket Housing Max Lamp Compatibility H7UICAT 75W PAR30S, 75W PAR30L, 85W BR30, 100W R30 H 300P Socket Bracket with White Open Trim 300SN Socket Bracket with Satin Nickel Open Trim 300TBZ Socket Bracket with Tuscan Bronze Open Trim A OD Dimensions** A: 4-3/4" [122mm] H: 4-3/4" [122mm] OD: 7-1/4" [184mm] Compatibl
6 7" [178mm] E26 Screw Base IC Housing - No Socket Bracket H7ICTNB INCH 6-1/2" [165mm] Ceiling opening 1/2" [13mm] 7" [178mm] 6-1/2" [165mm] Ceiling opening 7-1/2" [191mm] 1/2" [13mm] H7ICTNB 10-1/2" [267mm] 7-1/2" [191mm] 6" IC, New Construction Housing, No Socket Bracket, 120V The H7 recessed housing is the standard in the industry for both light commercial and residential applications.
7" [178mm] 6 E26 Screw Base IC Housing - No Socket Bracket INCH H7ICATNB 6-1/2" [165mm] Ceiling opening 1/2" [13mm] 7" [178mm] 6-1/2" [165mm] Ceiling opening 7-1/2" [191mm] 1/2" [13mm] 10-1/2" [267mm] H7ICATNB 7-1/2" [191mm] 6" IC, Air-Tite, New Construction Housing, No Socket Bracket, 120V The H7 recessed housing is the standard in the industry for both light commercial and residential applications.
6-3/4" [171mm] 6 E26 Screw Base IC Housing - No Socket Bracket E7ICATNB INCH 6-1/2" [165mm] Ceiling opening 6-3/4" [171mm] 6-1/2" [165mm] Ceiling opening 1/2" [13mm] 10-3/8" [263mm] 7-1/4" [185mm] 1/2" [13mm] E7ICATNB 10-3/8" [263mm] 6" IC, Air-Tite, New Construction Housing, No Socket Bracket, 120V The E7ICATNB is a compact and efficient recessed housing optimized and listed for EISA compliant tungsten-halogen lamps, CFL and LED lamps as well as incandescent.
6 E26 Screw Base Trims INCH IC "NB" Housings: H7ICTNB • H7ICATNB • E7ICATNB Reflectors 30 Reflector, Self-flange • • • • Self-flange reflector with torsion spring retention Accepts a wide range of lamps Makes installation Air-Tite regardless of housing used Socket supporting reflector 30HAT Housings Max Lamp Compatibility H7ICTNB 60W A19, 75W PAR30S, 75W PAR30L, 65W PAR38, 65W BR30, 90W BR40, 75W R30 H7ICATNB E7ICATNB Haze Reflector, White Trim H 30RGAT Residential Gold Reflector, White Trim 3
6 E26 Screw Base Trims INCH IC "NB" Housings: H7ICTNB • H7ICATNB • E7ICATNB 6120 Full Cone Reflector, Self-flange • • • • • Full cone reflector for BR30, BR40, A19 and PAR30 and PAR38 lamps Torsion spring retention Socket supporting reflector Self-flange trim ring sized to hide gaps 6120WH caused by construction tolerances White Reflector, Makes installation Air-Tite regardless of housing used White Self-flange Housings Max Lamp Compatibility H7ICTNB 6120WH: 43W A19, 75W PAR30S, 75W PAR30L, 65W PAR3
6 INCH E26 Screw Base Trims IC "NB" Housings: H7ICTNB • H7ICATNB • E7ICATNB 6126 Shallow Full Cone Baffle, Self-flange • • • • • Shallow full cone baffle for A19 and PAR30 lamps Torsion spring retention Socket supporting baffle Self-flange trim ring sized to hide gaps caused by construction tolerances 6126WB 6126BB Makes installation Air-Tite regardless of housing used White Baffle, White Self-flange Black Baffle, White Self-flange Housings H7ICTNB H7ICATNB E7ICATNB Dimensions** H A OD A: 5-3/8" [137
6 E26 Screw Base Trims INCH IC "NB" Housings: H7ICTNB • H7ICATNB • E7ICATNB 378 Regressed Gimbal with Splay 25º Tilt, Self-flange • • • • • • 25° tilt Regressed gimbal with splay trim Removable trim ring Accessories available: TRM6 designer trim rings, OT403 oversize trim ring Friction clips on trim Socket supporting gimbal Housings OD: 7-1/4" [184mm] 378P White Splay, White Trim 378 Clear Specular Splay, White Trim OD Max Lamp Compatibility H7ICTNB H7ICATNB Dimensions** 35W PAR30L Friction Cli
6 INCH E26 Screw Base Trims IC "NB" Housings: H7ICTNB • H7ICATNB • E7ICATNB 6170 Gimbal 25º Tilt, Self-flange • • • • • 25° tilt, 360° rotation Adjustable gimbal for PAR38 lamps Torsion spring retention Socket supporting gimbal Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility 6170WH White Gimbal, White Self-flange 6170BK Black Gimbal, Black Self-flange 6170SN Satin Nickel Gimbal, Satin Nickel Self-flange H7ICTNB H7ICATNB Dimensions** H A
6 E26 Screw Base Trims INCH IC "NB" Housings: H7ICTNB • H7ICATNB • E7ICATNB 171 Drop Opal Glass Lens with Reflector • • • • • White trim with drop opal glass lens PS version features non-conductive, non-corrosive gasketed polymer (plastic) trim ring PS version is "dead-front" construction and is wet location listed for use in showers Torsion spring retention PS version is Air-Tite; making any installation Air-Tite Housings H7ICTNB H7ICATNB E7ICATNB Dimensions** H: 4" [102mm] OD: 8" [203mm] H 171P Dr
6 INCH E26 Screw Base Trims IC "NB" Housings: H7ICTNB • H7ICATNB • E7ICATNB 6146 Open Wet Location, Full Reflector Self-flange • • • • Open wet location Showerlight for PAR30 and PAR38 outdoor rated lamps ONLY Torsion spring retention Socket supporting cone Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H7ICTNB 6146WH: 75W PAR30S, 75W PAR30L, 65W PAR38 6146SN, 6146TBZ: 60W PAR30S, 75W PAR30L, 65W PAR38 H7ICATNB E7ICATNB H 6146WH White Re
6 E26 Screw Base Trims INCH IC "NB" Housings: H7ICTNB • H7ICATNB • E7ICATNB 6255 Soft Square, Frost Curved Glass Lens, Self-flange • • • • • • Low profile curved frost glass lens Wet location Showerlight Torsion spring retention Non-conductive "dead-front" polymer (plastic) trim ring and glass lens Integral rotation adjustment up to +/– 25° for precise alignment with room Integrated socket supporting reflector for even illumination across lens corner-to-corner Housings D H 6255WH Frost Curved Glass
5" [127mm] 6 E26 Screw Base IC Shallow Housing INCH 6-1/2" [165mm] Ceiling opening H27ICAT 1/2" [13mm] 5" [127mm] 7-1/2" [191mm] 6-1/2" [165mm] Ceiling opening 1/2" [13mm] 10-1/2" [267mm] H27ICAT 6" IC, Air-Tite, Shallow New Construction Housing, 120V 7-1/2" [191mm] The H27ICAT recessed housing is designed for shallow ceilings and is a standard in the industry for both light commercial and residential applications.
5" [127mm] E26 Screw Base IC Shallow Housing 6 6-1/4" [159mm] 1/2" [13mm] H27RICAT INCH Ceiling opening to match template supplied 6-7/8" [175mm] 5" [127mm] 6-1/4" [159mm] 1/2" [13mm] Ceiling opening to match template supplied 13-1/4" [337mm] 6-7/8" [175mm] H27RICAT 6" IC, Air-Tite, Shallow Remodel Housing, 120V The H27RICAT recessed remodel housing is designed for shallow ceilings and is a standard in the industry for both light commercial and residential applications.
6 5" [127mm] E26 Screw Base IC Shallow Housing INCH 6-1/2" [165mm] Ceiling opening E27ICAT 1/2" [13mm] E27ICAT 5" [127mm] 6-1/2" [165mm] Ceiling opening 10-3/8" [263mm] 1/2" [13mm] 7-1/4" [185mm] E27ICAT 10-3/8" [263mm] 6" IC, Air-Tite, Shallow New Construction Housing, 120V The E27ICAT is a compact and efficient shallow recessed remodel housing optimized and listed for EISA compliant tungsten-halogen, CFL and LED lamps as well as incandescent.
6 5-1/8" [130mm] E26 Screw Base IC Shallow Housing E27RICAT 6-1/4" [159mm] 1/2" [13mm] INCH Ceiling opening to match template supplied 5-1/8" [130mm] 6-1/4" [159mm] 1/2" [13mm] Ceiling opening to match template supplied E27RICAT 10-1/2" [268mm] 7" [178mm] 6" IC, Air-Tite, Shallow Remodel Housing, 120V The E27RICAT is a compact and efficient shallow recessed remodel housing optimized and listed for EISA compliant tungsten-halogen, CFL and LED lamps as well as incandescent.
6 E26 Screw Base Trims INCH IC Shallow Housings: H27ICAT • H27RICAT • E27ICAT • E27RICAT Reflectors 426 Reflector Cone • • • • Accepts a wide variety of lamps Coil spring retention Removable trim ring Accessories available: TRM6 designer trim rings, OT403 oversize trim ring Housings Max Lamp Compatibility H27ICAT 50W PAR30S, 75W PAR30L, 65W BR30, 75W R30 H27RICAT E27ICAT E27RICAT 50W PAR30S, 75W PAR30L, 65W BR30 Compatible with Halogen, Incandescent, LED* or CFL* lamps 426 Clear Specular Reflec
6 E26 Screw Base Trims INCH IC Shallow Housings: H27ICAT • H27RICAT • E27ICAT • E27RICAT 6121 Shallow Full Cone Reflector, Self-flange • • • Shallow full cone reflector for A19, PAR30S and BR30 lamps Torsion spring retention Self-flange trim ring sized to hide gaps caused by construction tolerances Housings H27ICAT Max Lamp Compatibility E27ICAT H27RICAT E27RICAT Dimensions** H A OD 6121WH White Reflector, White Self-flange A: 5-3/8" [137mm] H: 4-3/8" [110mm] OD: 7-3/4" [197mm] 40W A19, 60W PAR30
6 E26 Screw Base Trims INCH IC Shallow Housings: H27ICAT • H27RICAT • E27ICAT • E27RICAT 6100 Tapered Metal Baffle with (2) Trim Rings • • • IC Contoured tapered sides of metal baffle for BR30 and PAR30 lamps Two plastic removable trim rings included narrow 7.25" OD and wide oversized 8.
6 E26 Screw Base Trims INCH IC Shallow Housings: H27ICAT • H27RICAT • E27ICAT • E27RICAT 6108 Coilex® Straight Plastic Baffle, Self-flange • • • Straight sides of Coilex baffle for large diameter BR30 and PAR30 lamps Coil spring retention Self-flange trim ring sized to hide gaps caused by construction tolerances Housings H27ICAT Max Lamp Compatibility E27ICAT 39W PAR30S, 60W PAR30L, 50W BR30 IC H 6108WB White Plastic Straight Coilex Baffle, White Self-flange 6108BB Black Plastic Straight Coilex B
6 E26 Screw Base Trims INCH IC Shallow Housings: H27ICAT • H27RICAT • E27ICAT • E27RICAT Adjustable – Eyeballs & Gimbals 74 Eyeball 30º Tilt, Self-flange • • • Provides optimum position for PAR30S lamps Torsion spring retention Socket supporting eyeball Housings H27ICAT Dimensions** Max Lamp Compatibility E27ICAT H27RICAT E27RICAT 75W PAR30S A: 3-7/8" [98mm] OD: 8" [203mm] A OD 74P White Eyeball & Trim Compatible with Halogen, Incandescent, LED* or CFL* lamps 78 Eyeball 30º Tilt, Self-flange
6 E26 Screw Base Trims INCH IC Shallow Housings: H27ICAT • H27RICAT • E27ICAT • E27RICAT 6215 Double Gimbal 30º-50º Tilt, Self-flange • • • • • • • 30°-50° tilt, 360° rotation 50° tilt with double gimbal design using compound angles Double gimbal for PAR30S lamps Torsion spring retention Shallow housings are compatible with PAR30S (short-neck) lamps Socket supporting gimbal Self-flange trim ring sized to hide gaps caused by construction tolerances Housings H27ICAT 6215WH White Gimbal, White Self-flang
6 E26 Screw Base Trims INCH IC Shallow Housings: H27ICAT • H27RICAT • E27ICAT • E27RICAT 173 Fresnel Lens with Reflector • • • • • White trim with glass Fresnel lens PS version features non-conductive, non-corrosive gasketed polymer (plastic) trim ring PS version is "dead-front" construction and is wet location listed for use in showers Torsion spring retention PS version is Air-Tite; making any installation Air-Tite Housings Max Lamp Compatibility H27ICAT 40W A19, 35W PAR30L E27ICAT 35W PAR30L
6 E26 Screw Base Trims INCH IC Shallow Housings: H27ICAT • H27RICAT • E27ICAT • E27RICAT 6230 Squircle Frost Glass Lens, Metal Trim, Self-flange • • • • • • Low profile frost glass lens Wet location Showerlight Torsion spring retention Self-flange low profile metal trim ring Socket supporting internal bracket Integral rotation adjustment up to +/– 25° for precise alignment with room Housings H27ICAT 6230AH Frost Glass Lens, Aluminum Haze Squircle Trim 6230PN Frost Glass Lens, Polished Nickel Squircl
6 E26 Screw Base Non-Insulated Ceiling Housings & Trims INCH Quick Reference – Non-IC Trim Series # 30 70 71 73 74 76 78 79 170 171 172 173 300 301 303 310 328 353 376 378 401 405 410 419 420 424 425 426 428 429 430 478 1412 1416 1417 1450 1475 1479 4051 4261 30SBAT 308 Style Reflector & Baffle Showerlight Showerlight Showerlight Adjustable Adjustable Adjustable Pinhole Showerlight Showerlight Showerlight Showerlight Open Open Wall Wash Baffle Splay Baffle Adjustable Adjustable Open Reflector Baffle A
E26 Screw Base Non-Insulated Ceiling Housings & Trims Quick Reference – Non-IC Trim Series # 6100 6101 6102 6103 6106 6107 6108 6109 6110 6120 6121 6125 6126 6130 6145 6146 6150 6160 6170 6215 6222 6230 6255 Style Baffle Baffle Baffle Baffle Reflector Reflector Baffle Baffle Baffle Reflector Reflector Baffle Baffle Adjustable Open Showerlight Open Showerlight Showerlight Showerlight Adjustable Adjustable Adjustable Showerlight Showerlight H7T • • • • • • • • • • • • • • • • • • • • • • • H7TCP • • • • •
7" [178mm] 6 E26 Screw Base Non-IC Housing INCH H7T 6-1/2" [165mm] Ceiling opening 7" [178mm] 6-1/2" [165mm] Ceiling opening 1/2" [13mm] 7-1/2" [191mm] 10-1/2" [267mm] 1/2" [13mm] H7T 6" Non-IC, New Construction, 120V The H7 recessed housing is the standard in the industry for both light commercial and residential applications. H7 series features full-frame design, robust construction, feed-through listing, Got Nail! bar hangers; and may support use of higher wattage lamps.
7" [178mm] 6 E26 Screw Base Non-IC Housing H7TCP INCH 6-1/2" [165mm] Ceiling opening 1/2" [13mm] 7" [178mm] 6-1/2" [165mm] Ceiling opening 7-1/2" [191mm] 10-1/2" [267mm] 1/2" [13mm] H7TCP 6" Non-IC, New Construction or Remodel, Chicago Plenum, 120V 7-1/2" [191mm] The H7TCP recessed housing is designed for City of Chicago applications. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing.
6 7" [178mm] E26 Screw Base Non-IC Housing INCH 6-1/4" [159mm] H7RT Ceiling opening to match template supplied 1/2" [13mm] 6-7/8" [175mm] 7" [178mm] 6-1/4" [159mm] 1/2" [13mm] Ceiling opening to match template supplied 13-1/4" [337mm] 6-7/8" [175mm] H7RT 6" Non-IC, Remodel, 120V The H7 recessed remodel housing is the standard in the industry for both light commercial and residential applications.
6-3/4" [171mm] 6 E26 Screw Base Non-IC Housing E7TAT INCH 6-1/2" [165mm] Ceiling opening 6-3/4" [171mm] 6-1/2" [165mm] Ceiling opening 1/2" [13mm] 10-3/8" [263mm] 7-1/4" [185mm] 1/2" [13mm] E7TAT 10-3/8" [263mm] 6" Non-IC, Air-Tite, New Construction Housing, 120V The E7TAT is a compact and efficient recessed Non-IC housing optimized and listed for EISA compliant tungsten-halogen, CFL and LED lamps as well as incandescent. Housing is suitable for residential or light commercial applications.
7-1/4" [184mm] 6 E26 Screw Base Non-IC Housing INCH E7RTAT 6-1/4" [159mm] 1/2" [13mm] Ceiling opening to match template supplied 7-1/4" [184mm] 6-1/4" [159mm] 7" [178mm] 1/2" [13mm] Ceiling opening to match template supplied E7RTAT 10-1/2" [268mm] 7" [178mm] 6" Non-IC, Air-Tite, Remodel Housing, 120V The E7RTAT is a compact and efficient recessed remodel Non-IC housing optimized and listed for EISA compliant, tungsten-halogen, CFL and LED lamps as well as incandescent.
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT Reflectors 30 Reflector, Self-flange • • • • Self-flange reflector with torsion spring retention Accepts a wide range of lamps Makes installation Air-Tite regardless of housing used Socket supporting reflector 30HAT Housings Max Lamp Compatibility H7T 100W A19, 75W PAR30S, 75W PAR30L, 85W BR30, 100W R30, 150W PAR38 H7TCP H7RT 150W A21, 50W PAR30S, 75W PAR30L, 65W BR30, 75W R30, 150W PAR38 E7TAT 100W A19, 150W A21,
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT 426 Reflector Cone • • • • Accepts a wide variety of lamps Coil spring retention Removable trim ring Accessories available: TRM6 designer trim rings, OT403 oversize trim ring Housings Max Lamp Compatibility H7T 75W PAR30S, 150W PAR38, 65W BR30, 120W BR40, 75W R30, 150W R40 H7TCP H7RT 75W PAR30S, 75W PAR30L, 65W BR30, 120W BR40, 75W R30, 150W R40 E7TAT 75W PAR30S, 150W PAR38, 65W BR30, 120W BR40 E7RTAT 75W PAR30S,
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT 6106 Straight Reflector Cone, Self-flange • • • • Straight sides of cone reflector Self-flange reflector cone Coil spring retention Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H7T E7TAT H7RT E7RTAT H7TCP Non-IC Dimensions** A: 5-3/8" [137mm] H: 2-5/8" [68mm] OD: 7-3/4" [197mm] H 6106SC Specular Clear Reflector, White Self-flange A OD 75W PAR30S, 75
6 INCH E26 Screw Base Trims Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT Baffles 30 Baffle, Self-flange • • • • • Self-flange metal baffle with upper reflector Socket supporting baffle Torsion spring retention Accepts a wide range of lamps Makes installation Air-Tite regardless of housing used Housings Max Lamp Compatibility H7T 100W A19, 150W A21, 75W PAR30S, 75W PAR30L, 150W PAR38, 85W BR30, 100W R30 H7TCP 75W A19, 75W PAR30S, 75W PAR30L, 150W PAR38, 85W BR30, 100W R30 H7RT 100W A19, 1
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT 410 Coilex® Straight Plastic Baffle • • • • Straight sides of baffle for large diameter lamps Black or white phenolic Coilex baffle with separate trim ring For PAR38 and R40 lamps Removable metal trim ring Housings Max Lamp Compatibility H7T H7TCP 75W PAR30S, 150W PAR38, 120W BR40, 150W R40 H7RT 120W BR40, 150W R40 E7TAT 75W PAR30S, 75W PAR30L, 150W PAR38, 65W BR30, 120W BR40 E7RTAT 120W BR40 Dimensions** H: 2-1
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT 6102 Tapered Metal Baffle, Self-flange • • • Non-IC Contoured tapered sides of metal baffle Coil spring retention Self-flange trim ring sized to hide gaps caused by construction tolerances Housings H7T H7TCP H7RT Max Lamp Compatibility E7TAT E7RTAT Dimensions** A: 5-3/8" [137mm] H: 2-5/8" [65mm] OD: 7-3/4" [197mm] H 6102WB 6102BB White Baffle, White Self-flange Black Baffle, White Self-flange A OD 75W PAR30S, 75W
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT 6110 PerftexTM Baffle, Self-flange • • • Perforated pattern baffle contoured for BR30 and PAR30 lamps Coil spring retention Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H7T E7TAT H7RT E7RTAT H7TCP H 6110WB White Perftex Baffle, White Self-flange 6110BB Black Perftex Baffle, White Self-flange A OD 6110BKBB Black Perftex Baffle, Black Self-flange Dimen
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT 76 Gimbal 30º Tilt, Self-flange • • • For use with PAR38 lamps 30° tilt Torsion spring retention Housings Max Lamp Compatibility H7T E7TAT H7RT E7RTAT 150W PAR38 (Side prong lamp recommended) H7TCP Dimensions** OD: 8" [203mm] 76P White Gimbal, White Trim OD Compatible with Halogen, Incandescent, LED* or CFL* lamps 78 Eyeball 30º Tilt, Self-flange • • • • • 30° tilt, 360° rotation Torsion spring retention Wide
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT 419 Regressed Eyeball with Splay 25º Tilt • • • • • Regressed eyeball with splay 25° tilt, 358° rotation Accessories available: TRM6 designer trim rings, OT403 oversize trim ring Removable trim ring Socket supporting trim Housings Dimensions** OD: 7-1/4" [184mm] 419P White Eyeball & Splay, White Trim OD Max Lamp Compatibility H7T E7TAT H7RT E7RTAT 75W PAR30S H7TCP Compatible with Halogen, Incandescent, LED* or CF
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT 6170 Gimbal 25º Tilt, Self-flange • • • • • 25° tilt, 360° rotation Adjustable gimbal for PAR38 lamps Torsion spring retention Socket supporting gimbal Self-flange trim ring sized to hide gaps caused by construction tolerances Housings H7T H7TCP H7RT Max Lamp Compatibility E7TAT 6170WH White Gimbal, White Self-flange 6170BK Black Gimbal, Black Self-flange 6170SN Satin Nickel Gimbal, Satin Nickel Self-flange Dimension
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT 71 Drop Opal Glass Lens • • • • White trim, drop opal glass lens PS version features "dead-front" construction and is wet location listed for use in showers Non-conductive, non-corrosive polymer (plastic) trim ring Torsion spring retention Housings H7T Max Lamp Compatibility E7TAT H7TCP H7RT Dimensions** OD: 8" [203mm] 71P Drop Opal Glass Lens, White Trim 71PS Drop Opal Glass Lens, White Polymer Trim, Wet Location OD
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT 172 Dome Glass Lens with Reflector • • • • • Frosted glass dome Features "dead-front" construction and is wet location listed for use in showers Non-conductive, non-corrosive gasketed polymer (plastic) trim ring Torsion spring retention Air-Tite trim makes any installation Air-Tite Housings Max Lamp Compatibility H7T E7TAT 100W A19, 75W PAR30S H7RT E7RTAT 60W A19, 50W PAR30S Dimensions** H: 2-1/8" [54mm] OD: 7-3/
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT 6150 Low Profile, Frosted Glass Dome Lens, Self-flange • • • • • • Low profile, frosted glass dome lens Wet location Showerlight Torsion spring retention Non-conductive "dead-front" polymer (plastic) trim ring and glass lens Socket supporting internal reflector Self-flange trim ring sized to hide gaps caused by construction tolerances Housings H7T H7TCP H7RT E7TAT Max Lamp Compatibility H A OD 6150WH Frosted Glass Dom
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT Open, Splay & Wall Wash 79 Pinhole Trim • • 1-7/8" open pinhole for R20 lamp Torsion spring retention Housings Max Lamp Compatibility H7T 50W PAR20, 50W PAR30S, 50W R20 H7TCP 60W A19 E7TAT 50W PAR20, 50W PAR30S Dimensions** OD: 8" [203mm] 79 Pinhole Trim OD Compatible with Halogen, Incandescent, LED* or CFL* lamps 300 Open Trim with Fixed Socket Bracket • • • Open trim for BR30 and PAR30 lamps Torsion spring r
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT 401 Open Trim • • Open trim for BR40 and R40 lamps Coil spring retention Housings H7T OD: 8" [203mm] Max Lamp Compatibility H7RT H7TCP E7TAT Dimensions** E7RTAT 120W BR40, 150W R40 401P White Open Trim 401AL Satin Aluminum Open Trim 120W BR40 OD Compatible with Halogen, Incandescent, LED* or CFL* lamps 428 White Splay Trim • • Splay trim for BR40 and R40 lamps Coil spring retention Housings H7T OD: 7-3/4" [1
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT 430 Wall Wash with Baffle & Full Reflector • • • • Black or white step baffle with full reflector Designed to spread light close to the ceiling to eliminate the "cave effect" Torsion spring retention Makes installation Air-Tite regardless of housing used 430W Housings Max Lamp Compatibility H7T 90W TB19, 100W A19, 100W BT15, 100W MB19 E7TAT 100W A19 White Baffle, White Trim Dimensions** H: 5" [127mm] OD: 7-1/4" [1
6 E26 Screw Base Trims INCH Non-IC Housings: H7T • H7TCP • H7RT • E7TAT • E7RTAT 1416 Low Voltage Baffle 30º Tilt • • • Low voltage trim Includes 120V transformer for retrofit to H7T and H7RT housings Torsion spring retention Housings H7T Max Lamp Compatibility E7TAT H7RT Dimensions** OD: 7-1/4" [184mm] 1416W White Baffle, White Trim 1416BA Black Baffle, White Trim OD 50W 12V MR16 Compatible with Halogen, Incandescent, LED* or CFL* lamps 1450 Low Voltage Slot Aperture 30º Tilt • • • Low voltag
7" [178mm] 6 E26 Screw Base Non-IC Housing - No Socket Bracket INCH H7TNB 6-1/2" [165mm] Ceiling opening 1/2" [13mm] 7" [178mm] 6-1/2" [165mm] Ceiling opening 7-1/2" [191mm] 1/2" [13mm] 10-1/2" [267mm] H7TNB 6" Non-IC, New Construction Housing, No Socket Bracket, 120V The H7 recessed housing is the standard in the industry for both light commercial and residential applications.
E7TATNB 6-3/4" [171mm] 6 E26 Screw Base Non-IC Housing - No Socket Bracket INCH E7TATNB 6-1/2" [165mm] Ceiling opening E7TATNB 6-3/4" [171mm] 6-1/2" [165mm] Ceiling opening 7-1/4" [185mm] 10-3/8" [263mm] 6" Non-IC, Air-Tite, New Construction Housing, No Socket Bracket, 120V The E7TATNB is a compact and efficient recessed Non-IC housing optimized and listed for EISA compliant tungsten-halogen, CFL and LED lamps as well as incandescent.
6 E26 Screw Base Trims INCH Non-IC "NB" Housings: H7TNB • E7TATNB Reflectors 30 Reflector, Self-flange • • • • Self-flange reflector with torsion spring retention Accepts a wide range of lamps Makes installation Air-Tite regardless of housing used Socket supporting reflector 30HAT Housings Max Lamp Compatibility H7TNB 100W A19, 150W A21, 75W PAR30S, 75W PAR30L, 85W BR30, 100W R30 E7TATNB 100W A19, 150W A21, 75W PAR30S, 75W PAR30L, 150W PAR38, 65W BR30 Haze Reflector, White Trim H 30RGAT Reside
6 E26 Screw Base Trims INCH Non-IC "NB" Housings: H7TNB • E7TATNB 6120 Full Cone Reflector, Self-flange • • • • • Full cone reflector Torsion spring retention Socket supporting reflector Self-flange trim ring sized to hide gaps caused by construction tolerances Makes installation Air-Tite regardless of housing used • Housings Max Lamp Compatibility H7TNB 100W A19, 150W A21, 75W PAR30S, 75W PAR30L, 150W PAR38, 85W BR30, 120W BR40 E7TATNB H 6120WH White Reflector, White Self-flange 6120SN Satin N
6 E26 Screw Base Trims INCH Non-IC "NB" Housings: H7TNB • E7TATNB 6126 Shallow Full Cone Baffle, Self-flange • • • • Shallow full cone baffle Torsion spring retention Socket supporting baffle Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H7TNB 40W A19, 75W PAR30S, 75W PAR30L, 65W BR30 E7TATNB Dimensions** H A OD 6126WB 6126BB White Baffle, White Self-flange Black Baffle, White Self-flange A: 5-3/8" [137mm] H: 4-3/8" [110mm] OD: 7-3/4"
6 E26 Screw Base Trims INCH Non-IC "NB" Housings: H7TNB • E7TATNB 378 Regressed Gimbal with Splay 25º Tilt, Self-flange • • • • • • 25° tilt Regressed gimbal with splay trim Removable trim ring Accessories available: TRM6 designer trim rings, OT403 oversize trim ring Friction clips on trim Socket supporting gimbal Housings H7TNB E7TATNB Dimensions** OD: 7-1/4" [184mm] 378P White Splay, White Trim 378 Clear Specular Splay, White Trim OD Max Lamp Compatibility 75W PAR30S Friction Clips on Trim Com
6 E26 Screw Base Trims INCH Non-IC "NB" Housings: H7TNB • E7TATNB 6130 Eyeball 35º Tilt, Self-flange • • • • • 35° tilt, 360° rotation Adjustable eyeball trim for BR30 and PAR30 lamps Torsion spring retention Socket supporting eyeball Self-flange trim ring sized to hide gaps caused by construction tolerances Housings H7TNB Dimensions** H A: 3-7/8" [100mm] H: 3-7/8" [100mm] OD: 7-3/4" [197mm] A 6130WH White Eyeball, White Self-flange OD Max Lamp Compatibility E7TATNB 75W PAR30S, 75W PAR30L, 65W
6 E26 Screw Base Trims INCH Non-IC "NB" Housings: H7TNB • E7TATNB Lenses & Wet Location Showerlights 170 Albalite Lens with Reflector • • • • • White trim with Albalite glass lens PS version features non-conductive, non-corrosive gasketed polymer (plastic) trim ring PS version is "dead-front" construction and is wet location listed for use in showers Torsion spring retention PS version is Air-Tite; making any installation Air-Tite Housings H7TNB E7TATNB Dimensions** H 170P Albalite Lens, White Trim
6 E26 Screw Base Trims INCH Non-IC "NB" Housings: H7TNB • E7TATNB 6145 Open Wet Location, Shallow Reflector, Self-flange • • • • Open wet location shallow Showerlight for PAR30S and PAR38 outdoor rated lamps ONLY Torsion spring retention Socket supporting cone Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H7TNB 75W PAR30S, 75W PAR30L, 150W PAR38 E7TATNB Compatible with Halogen, Incandescent, LED* or CFL* lamps H 6145WH White Shallow R
6 E26 Screw Base Trims INCH Non-IC "NB" Housings: H7TNB • E7TATNB 6230 Squircle Frost Glass Lens, Metal Trim, Self-flange • • • • • • Low profile frost glass lens Wet location Showerlight Torsion spring retention Self-flange low profile metal trim ring Socket supporting internal bracket Integral rotation adjustment up to +/– 25° for precise alignment with room Housings H7TNB Max Lamp Compatibility E7TATNB D H 6230AH Frost Glass Lens, Aluminum Haze Squircle Trim 6230PN Frost Glass Lens, Polished N
6 5" [127mm] E26 Screw Base Non-IC Shallow Housing INCH H27T 6-1/2" [165mm] Ceiling opening 1/2" [13mm] 5" [127mm] 7-1/2" [191mm] 6-1/2" [165mm] Ceiling opening 1/2" [13mm] 10-1/2" [267mm] H27T 7-1/2" [191mm] 6" Non-IC, Shallow New Construction Housing, 120V The H27T recessed housing is designed for shallow ceilings and is a standard in the industry for both light commercial and residential applications.
5" [127mm] E26 Screw Base Non-IC Shallow Housing H27RT 6 6-1/4" [159mm] 1/2" [13mm] INCH Ceiling opening to match template supplied 6-7/8" [175mm] 5" [127mm] 6-1/4" [159mm] 1/2" [13mm] Ceiling opening to match template supplied 13-1/4" [337mm] 6-7/8" [175mm] H27RT 6" Non-IC, Shallow Remodel Housing, 120V The H27RT recessed remodel housing is designed for shallow ceilings and is a standard in the industry for both light commercial and residential applications.
6 5" [127mm] E26 Screw Base Non-IC Shallow Housing INCH 6-1/2" [165mm] Ceiling opening E27TAT 1/2" [13mm] E27TAT 5" [127mm] 6-1/2" [165mm] Ceiling opening 10-3/8" [263mm] 1/2" [13mm] 7-1/4" [185mm] E27TAT 10-3/8" [263mm] 6" Non-IC, Air-Tite, Shallow New Construction Housing, 120V The E27TAT is a compact and efficient shallow recessed Non-IC housing optimized and listed for EISA compliant tungsten-halogen, CFL and LED lamps as well as incandescent.
6 5-1/8" [130mm] E26 Screw Base Non-IC Shallow Housing 6-1/4" [159mm] E27RTAT 1/2" [13mm] INCH Ceiling opening to match template supplied 5-1/8" [130mm] 6-1/4" [159mm] Ceiling opening to match template supplied E27RTAT 10-1/2" [268mm] 7" [178mm] 6" Non-IC, Air-Tite, Shallow Remodel Housing, 120V The E27RTAT is a compact and efficient shallow recessed remodel Non-IC shallow housing optimized and listed for EISA compliant tungsten-halogen, CFL and LED lamps as well as incandescent.
6 E26 Screw Base Trims INCH Non-IC Shallow Housings: H27T • H27RT • E27TAT • E27RTAT Reflectors 426 Reflector Cone • • • • Accepts a wide variety of lamps Coil spring retention Removable trim ring Accessories available: TRM6 designer trim rings, OT403 oversize trim ring Housings Max Lamp Compatibility H27T 75W PAR30S, 75W PAR30L, 85W BR30, 100W R30 H27RT 75W PAR30S, 75W PAR30L, 65W BR30, 75W R30 E27TAT E27RTAT 75W PAR30S, 75W PAR30L, 65W BR30 Compatible with Halogen, Incandescent, LED* or CFL*
6 E26 Screw Base Trims INCH Non-IC Shallow Housings: H27T • H27RT • E27TAT • E27RTAT 6121 Shallow Full Cone Reflector, Self-flange • • • Shallow full cone reflector for A19, PAR30S and BR30 lamps Torsion spring retention Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H27T E27TAT H27RT E27RTAT Dimensions** H A OD 6121WH White Reflector, White Self-flange A: 5-3/8" [137mm] H: 4-3/8" [110mm] OD: 7-3/4" [197mm] 40W A19, 75W PAR30S, 75W P
6 E26 Screw Base Trims INCH Non-IC Shallow Housings: H27T • H27RT • E27TAT • E27RTAT 6100 Tapered Metal Baffle with (2) Trim Rings • • • Non-IC Contoured tapered sides of metal baffle for BR30 and PAR30 lamps Two plastic removable trim rings included narrow 7.25"OD and wide oversized 8.
6 E26 Screw Base Trims INCH Non-IC Shallow Housings: H27T • H27RT • E27TAT • E27RTAT 6109 Coilex® Tapered Baffle, Self-flange • • • Contoured tapered sides of Coilex baffle for BR30 and PAR30 lamps Coil spring retention Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H27T E27TAT H27RT E27RTAT 75W PAR30S, 75W PAR30L, 65W BR30 Non-IC H 6109WB White Plastic Tapered Coilex Baffle, White Self-flange 6109BB Black Plastic Tapered Coilex Baff
6 E26 Screw Base Trims INCH Non-IC Shallow Housings: H27T • H27RT • E27TAT • E27RTAT 376 Regressed Gimbal 30º Tilt, Self-flange • • • • 30° tilt Regressed gimbal with baffle Torsion spring retention Socket supporting gimbal Housings Max Lamp Compatibility H27T E27TAT H27RT E27RTAT Dimensions** OD: 7-1/4" [184mm] 376W White Baffle, White Trim 376P Black Baffle, White Trim OD 75W PAR30S Compatible with Halogen, Incandescent, LED* or CFL* lamps 378 Regressed Gimbal with Splay 25º Tilt, Self-f
6 E26 Screw Base Trims INCH Non-IC Shallow Housings: H27T • H27RT • E27TAT • E27RTAT 6215 Double Gimbal 30º-50º Tilt, Self-flange • • • • • • • 30°-50° tilt, 360° rotation 50° tilt with double gimbal design using compound angles Double gimbal for PAR30S lamps Torsion spring retention Shallow housings are compatible with PAR30S (short-neck) lamps Socket supporting gimbal Self-flange trim ring sized to hide gaps caused by construction tolerances Housings 6215WH White Gimbal, White Self-flange 6215BK Bl
6 E26 Screw Base Trims INCH Non-IC Shallow Housings: H27T • H27RT • E27TAT • E27RTAT 170 Albalite Lens with Reflector • • • • • White trim with Albalite glass lens PS version features non-conductive, non-corrosive gasketed polymer (plastic) trim ring PS version is "dead-front" construction and is wet location listed for use in showers Torsion spring retention PS version is Air-Tite; making any installation Air-Tite Housings Dimensions** H 170P Albalite Lens, White Trim 170PS Albalite Lens, Polymer
6 E26 Screw Base Trims INCH Non-IC Shallow Housings: H27T • H27RT • E27TAT • E27RTAT 6145 Open Wet Location, Shallow Reflector, Self-flange • • • • Open wet location shallow Showerlight for PAR30S and PAR38 outdoor rated lamps ONLY Torsion spring retention Socket supporting cone Self-flange trim ring sized to hide gaps caused by construction tolerances Housings Max Lamp Compatibility H27T E27TAT 75W PAR30S, 75W PAR30L, 150W PAR38 H27RT E27RTAT 75W PAR30S, 75W PAR30L, 90W PAR38 H 6145WH White
6 E26 Screw Base Trims INCH Non-IC Shallow Housings: H27T • H27RT • E27TAT • E27RTAT 6255 Soft Square, Frost Curved Glass Lens, Self-flange • • • • • • Low profile curved frost glass lens Wet location Showerlight Torsion spring retention Non-conductive "dead-front" polymer (plastic) trim ring and glass lens Integral rotation adjustment up to +/– 25° for precise alignment with room Integrated socket supporting reflector for even illumination across lens corner-to-corner Housings 6255WH Frost Curved Gl
6 INCH E26 Screw Base Slope Ceiling Solutions Specifications, compliances and dimensions subject to change without notice HALO Halo Recessed Catalog - 6" Recessed Downlighting 355
7-1/8" [181mm] 6 1/2" [13mm] E26 Screw Base H47 Series IC Slope Housing 5-1/4" [133mm] INCH H47ICT 6-3/4" [171mm] Ceiling opening 7-1/8" [181mm] 10-1/2" [267mm] 1/2" [13mm] 10" [254mm] 14-3/4" [375mm] 5-1/4" [133mm] 6-3/4" [171mm] Ceiling opening H47ICT 2/12 10-1/2" [267mm] 6" IC, New Construction Slope Housing, 120V Designed for sloped ceiling installations for ceilings from 2/12 to 6/12 pitch.
7-1/8" [181mm] 6 1/2" [13mm] E26 Screw Base H47 Series IC Slope Housing 5-1/4" [133mm] 6-3/4" [171mm] Ceiling opening H47ICAT INCH 7-1/8" [181mm] 10-1/2" [267mm] 1/2" [13mm] 5-1/4" [133mm] 6-3/4" [171mm] Ceiling opening 14-3/4" [375mm] H47ICAT 2/12 10-1/2" [267mm] 6" IC, Air-Tite, New Construction Slope Housing, 120V Designed for sloped ceiling installations for ceilings from 2/12 to 6/12 pitch.
6-1/2” to 8-3/4” [165mm to 222mm] 6 E26 Screw Base H47 Series Non-IC Slope Housing INCH H47T 5-1/4" [133mm] 6-3/4" [171mm] Ceiling opening 6-1/2” to 8-3/4” [165mm to 222mm] 10-1/2" [267mm] 14-3/4" [375mm] 5-1/4" [133mm] 6-3/4" [171mm] Ceiling opening H47T 2/12 10-1/2" [267mm] 6" Non-IC, New Construction Slope Housing, 120V Designed for sloped ceiling installations for ceilings from 2/12 to 6/12 pitch.
6 E26 Screw Base H47 Series Slope Trims INCH H47 Series Housings: H47ICT • H47ICAT • H47T 78 Eyeball 30º Tilt, Self-flange • • • • • 30° tilt, 360° rotation Torsion spring retention Wide choice of finishes for any decor Socket supporting eyeball 78PAT makes installation Air-Tite regardless of housing used Housings 78P White Eyeball, White Trim 78PAT White Eyeball, White Trim Max Lamp Compatibility 78SN Satin Nickel Eyeball, Satin Nickel Trim 78TBZ Tuscan Bronze Eyeball, Tuscan Bronze Trim H47ICT
7-3/8" [187mm] 6 1/2" [13mm] E26 Screw Base H645IC Slope Housing INCH H645IC 6-1/2" [165mm] Ceiling opening 7-3/8" [187mm] 9-1/2" [241mm] 1/2" [13mm] 13" [330mm] 6-1/2" [165mm] Ceiling opening H645IC 2/12 9-1/2" [241mm] 6" IC, Air-Tite, New Construction Slope Housing, 120V Designed for sloped ceiling installations for ceilings from 2/12 to 12/12 pitch. The socket aiming mechanism allows the lamp to be aimed straight down in accordance with of ceiling pitch (2/12 to 12/12).
6 E26 Screw Base H645IC Slope Trims INCH IC Slope Housings: H645IC 455 Specular Reflector • • • Clear, gold or haze reflector Removable trim ring Accessories available: TRM6 designer trim rings, OT403 oversize trim ring Housing Max Lamp Compatibility H645IC 65W BR30, 75W R30, 75W PAR30L 455SC Specular Clear Reflector, White Trim 455H Haze Reflector, White Trim 455CG Champagne Gold Reflector, White Trim OD Dimensions** OD: 7-1/4" [184mm] 456 Seamless Coilex® Baffle Trims • • One piece seamles
Specialty Products H37T - 401AL Heat Light, Non-IC H2932ICTW Lensed Wall / Step Light 250W infra-red. For non-insulated ceilings. If insulation is present it must be kept 3" from the fixture on all sides. Finish: White (P) Housing: 8" OD x 5-1/2" Height Trim: Brushed aluminum Rating: Improper Lamp (IP) Rated cULus Listed for wall mounting in insulation. IC rated for direct contact with insulation* and combustible material, cULus listed for damp location; and feed through.
Specialty Products & Accessories GA-ATHx-6PK Dichroic Color Filters For low voltage MR16 units Optional accessory gasket covers the ceiling cut-out opening on a finished ceiling, for use with H5 & H7 Air-Tite IC housings.
Accessories Mounting Clips H930 R/PAR Lamp Aiming Accessory For H7T, H7RT, H7ICT, H7ICAT, H7RICT, H7RICAT housings with 310 and 426 trims. Allows lamp to be aimed up to 30° from vertical and rotated 358°. See housing-trim selection for lamp listings. TB7 Details T-Bar attachment clips. Can also be used with HB424 and HB224 hanger bars. Can be used with H7TCP and H750TCP housings hanger bars. Set of four. Order one set per fixture.
Index 79....................................................................................283, 328, 354 378..........................................................266, 279, 291, 322, 337, 350 426..................................................................260, 273, 300, 316, 346 945..........................................................................................184, 192 1495................................................................................................199 1945.............
Index 456W..............................................................................................361 477P................................................................................................362 477W..............................................................................................362 478P........................................................................267, 291, 323, 337 5000P......................................................................215, 227, 240, 250 5000SN...
Index H2932T...........................................................................................362 H347................................................................................................363 H347200..........................................................................................363 H36ICAT.........................................................................................144 H36LVICAT.....................................................................................
Index TL402SBKS................................................87, 88, 89, 92, 93, 94, 102 TL402SCS...................................................87, 88, 89, 92, 93, 94, 102 TL402SNS..................................................87, 88, 89, 92, 93, 94, 102 TL402TBZS............................................................87, 88, 92, 93, 102 TL402WHS.................................................87, 88, 89, 92, 93, 94, 102 TL403BBS..................................................................
SMART LIGHTING | RECESSED | TRACK | SURFACE For over 60 years, HALO® has been the industry leader in recessed and track lighting providing innovative and contractor-friendly lighting products. HALO has been chosen as the Brand Leader by Builder magazine subscribers for the last twenty-three consecutive years, further reinforcing HALO’s longstanding industry leadership, brand equity and user preferences.
Photography: Jeffrey A. Davis Photography, Inc. © 2018 Lighting Product Lines Ametrix AtLite Corelite Ephesus Fail-Safe HALO HALO Commercial Invue io IRiS Lumark Lumière McGraw-Edison Metalux MWS Neo-Ray Portfolio RSA Shaper Streetworks Sure-Lites Controls Product Lines Greengate Connected Lighting Systems Fifth Light (Canada Only) HALO Home WaveLinx IoT Platform Trellix Cooper Lighting Solutions 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 www.cooperlighting.