Product Brochure

Specifications, compliances and dimensions subject to change without notice
6
INCH
HALO Halo Recessed Catalog - 6" Recessed Downlighting
272
Compatible Trims
30
70
71
73
74
76
78
79
170
171
172
173
300
310
328
353
376
378
404
419
420
424
425
426
429
430
4041
4261
6100
6101
6102
6103
6106
6107
6108
6109
6120
6121
6125
6126
6130
6145
6146
6150
6160
6162
6215
6222
6230
6255
30SBAT
Trims for use in Halo listed housings
Select trims are classified for use in other
housings, see www.cooperlighting.com/legal
H7UICAT
E26 Screw Base Housing
6" IC, Air-Tite, New Construction Universal Housing, 120V
The H7UICAT universal housing is designed to support the use of
higher wattage lamps than single wall housings (depending upon
the trim). The H7 recessed housing is the standard in the industry
for both light commercial and residential applications. H7 series
features full-frame design, robust construction, feed-through
listing, and Got Nail! bar hangers. A wide variety of trims allows
a number of different lighting effects to be created with one basic
housing. H7UICAT is for installations where the housing will be
in direct contact with insulation,* and its Air-Tite design will also
meet restricted air flow code requirements. May be retrofit with
compatible Halo LED lighting systems.
Special Features
Got Nail!
™
bar hangers
Pass-N-Thru
™
bars
Slide-N-Side
™
junction box
Quick Connect
™
push wire nuts
Air-Tite
™
code compliant
Features
Housing
•
Double wall aluminum construction for greater heat
dissipation, and support of higher wattage lamps
•
The inner housing can be removed from plaster frame
for junction box access
•
Pre-installed Air-Tite ready ceiling contact gasket
•
Designed for insulated ceilings in direct contact with
insulation* (May also be installed in non-insulated ceilings)
•
Sealed and gasketed for Air-Tite ready installation
Socket Plate
•
Fixed socket position maintains consistent lamp position
•
The socket can be detached from the inner housing for
use with socket supporting trims
Plaster Frame
Housing adjusts in plaster frame 1-3/8" to accommodate
different ceiling thicknesses. Galvanized steel construction.
Plaster frame features include:
•
Regressed locking screw for securing hanger bars
•
Cutouts for easily crimping hanger bars in position
•
Halo name embossed on plaster frame
Includes:
•
Got Nail!
™
bar hangers (Details Pg. 13)
•
Pass-N-Thru
™
bars (Details Pg. 7)
•
Slide-N-Side
™
junction box wire traps (Details Pg. 13)
•
Quick Connect
™
push wire nuts (Details Pg. 13)
•
Air-Tite
™
code compliant (Details Pg. 13)
Socket
•
Porcelain socket with nickel plated brass screw shell
•
Snap-in springs secure socket to socket plate, and may
be detached when using socket supporting trims
•
Overspray protector included
Thermal Protector
Self resetting thermal protector deactivates fixture
if overheating occurs due to improper lamping or
misapplied insulation
Trims
Halo Fit-All concept offers multiple trim options in a variety
of design styles, and functional beam distributions to control
beam angle and lumen delivery in accommodating various
lamp types including Halogen, CFL and LED
Compliance
•
cULus Listed 1598 luminaire
•
cULus Listed damp location
•
cULus Listed for wet location,
covered ceiling, with select trims
•
cULus Listed for feed through
•
cULus Listed for direct contact with
insulation and combustible material*
•
Air-Tite code compliant. Certified under ASTM E283;
not exceeding 2.0 cfm (0.944 L/s) air leakage rate
tested at a 1.57 psf (75 Pa) pressure differential.
•
RoHS compliant
*Not to be used in direct contact with spray foam insulation
(Consult NEMA LSD57-2013)
H7UICAT
7-1/2"
[191mm]
6-3/4"
[171mm]
1/2"
[13mm]
6-1/2" [165mm]
Ceiling opening
9-1/2"
[241mm]
13"
[330mm]
7-1/2"
[191mm]
6-3/4"
[171mm]
1/2"
[13mm]
6-1/2" [165mm]
Ceiling opening
9-1/2"
[241mm]
13"
[330mm]