Product Brochure

Specifications, compliances and dimensions subject to change without notice
HALO Halo Recessed Catalog - LED Recessed Downlighting
47
LED Recessed Housing
H550RICAT
1/2"
[13mm]
5-1/2"
[140mm]
Ceiling opening to
match template supplied
7"
[1
78mm]
14"
[356mm]
6-1/8"
[155mm]
1/2"
[13mm]
5-1/2"
[140mm]
Ceiling opening to
match template supplied
7"
[178mm]
14"
[356mm]
6-1/8"
[155mm]
5" IC, Air-Tite, Remodel, LED Housing
The H550RICAT is a dedicated LED remodel housing to be used
with compatible Halo LED modules and trims. The H550RICAT
is designed for remodel applications in insulated ceilings and
can be in direct contact with ceiling insulation*. This Air-Tite
housing design restricts airflow between conditioned spaces
and unconditioned areas. The H550RICAT LED connector system
provides high efficacy code compliance when used with compatible
Halo LED lighting systems.
H550RICAT
Features
Housing
•
Single wall aluminum housing
•
Designed for insulated ceilings in direct
contact with insulation* (May also be installed
in non-insulated ceilings)
•
For installation from below the finished ceiling
Integral flange secures fixture against ceiling
•
Halo identity embossed on can top
Junction Box
•
Seven 1/2" trade size conduit knockouts
with true pry-out slots
•
Four type non-metallic (NM) cable pry-outs
simplify installation
Includes:
•
Quick Connect
™
push wire nuts (Details Pg. 13)
•
Air-Tite
™
code compliant (Details Pg. 13)
Remodel Springs
Four remodel clips secure housing and accommodate
1/2" and 5/8" ceiling material
LED Module Connection
•
Halo LED modules install with a plug-in 120V-277V
rated line voltage wiring connector (UL and CSA
Listed luminaire disconnect)
•
This non-screw base connection preserves the high
efficacy rating and prevents use of low efficacy sources
(See LED module specifications)
•
LED connection is rated for 120V and 277V input.
Installer must verify LED module voltage is compatible
with the applicable voltage input. If uncertain, consult
a qualified electrician.
Compliance
•
cULus Listed 1598 luminaire
•
cULus Listed for feed through
•
cULus Listed for damp location
•
cULus Listed for wet location with select trims
•
cULus Listed for direct contact with insulation and
combustible material*
•
Air-Tite code compliant. Certified under ASTM E283;
not exceeding 2.0 cfm (0.944 L/s) air leakage rate
tested at a 1.57 psf (75 Pa) pressure differential.
•
Rated for 20W maximum
•
Use with designated HALO LED systems
for ENERGY STAR
®
certification
•
Can be used for State of California Title 24 high efficacy
compliance with Title 20 Certified Halo LED
•
Can be used for International Energy Conservation Code
(IECC) high efficacy compliance with designated Halo
LED modules and trims
•
Refer to specification sheets online for additional
compliance information
•
RoHS compliant
*Not to be used in direct contact with spray foam insulation
(Consult NEMA LSD57-2013)
Special Features
Quick Connect
™
push wire nuts
Air-Tite
™
code compliant
Compatible LED Lighting Systems
ML56 with 59x Series Trims
SLD6
RL56
RA56
LT56
LA56
RSq5
BLD6
SMD6