Product Brochure

Specifications, compliances and dimensions subject to change without notice
HALO Halo Recessed Catalog - LED Recessed Downlighting
79
LED Recessed
ML56 – 600 & 900 Series
5"/6" LED Retrofit Module – 6 Inch Application
The ML56 LED downlighting system is a series of LED light modules for use
with designated 6" ML56 LED trims in new construction, remodel and retrofit
housings. Compatible with Halo 6" housings. ML56 light modules are offered
in 600 series, 900 series, and 1200 series, 90 CRI, and four color temperatures
2700K, 3000K, 3500K, 4000K. ML56 light modules are universal voltage
120V – 277V and dimmable at 120V. The ML56 lens provides uniform
diffuse illumination.
Features
Mechanical – Module
Module includes LED driver, heat sink, and lens
Durable die-cast aluminum construction
Heat sink designed to conduct heat away from the LED
keeping the junction temperatures below specified
maximums, including insulated ceiling environments
Lens
Impact-resistant polycarbonate
Convex form for lamp-like appearance
High lumen transmission
Diffusing for even illumination
Mounting
Light modules attach to reflector and baffle trims
via locking tabs, and attach to eyeballs via keyed
twist-to-lock mating bosses
The complete light module and trim assembly installs
into housings with precision formed torsion springs
located on the trim
LED
Correlated Color Temperature (CCT):
2700K, 3000K, 3500K, and 4000K
Color Rendering Index (CRI): 90
600 nominal lumens, range dependent
on CCT, CRI and trim
900 nominal lumens, range dependent
on CCT, CRI and trim
Lumen maintenance L70 at 50,000 hours
Electrical Power Connections
LED connector is a non-screw base luminaire disconnect
offering easy installation with the matching Halo 6" H750
and H2750 series housings (Use with ML56 6" LED trims)
LED connector is a non-screw base, and where required
to qualify as a high efficacy luminaire
E26 medium screw base retrofit adapter included
LED Driver
Driver is universal voltage 120V-277V, and may be
controlled from a switch (Switchable at 120V, 220V,
230V, 240V, and 277V)
Driver is dimmable at 120V operation when connected
to a compatible dimmer
Driver is a high efficiency, electronic power supply
providing DC power to the LED
Driver meets FCC EMI/RFI consumer level limits on
120V main inputs, and is compliant for use in residential
and commercial installations
Driver features high power factor, low THD, and
has integral thermal protection in the event of over
temperature or internal failure
Compliance
cULus Listed 1598 luminaire, with listed Halo housings
UL Classified, with other housings (See specifications
online for housing compatibility)
cULus Listed for damp locations
cULus Listed wet location, covered ceiling (shower rated)
with ML56 baffle and reflector trims only
Air-Tite code compliant. Certified under ASTM E283;
not exceeding 2.0 cfm (0.944 L/s) air leakage rate
tested at a 1.57 psf (75 Pa) pressure differential
IP66 Ingress Protection rated with baffle
and reflector trims only
RoHS compliant
May be used in IC (insulated ceiling) housings in direct
contact with insulation* and combustible material
90 CRI (R9 > 50) can be used for California Title 24
compliance, Title 20 Certified for residential compliance
Can be used for International Energy Conservation Code
(IECC) high efficacy luminaire compliance
ENERGY STAR
®
certified downlight recessed system
EMI/RFI per FCC 47CFR Part 15 Class B consumer limits
(commercial and residential compliant)
Photometric testing in accordance with IES LM-79
Lumen maintenance projections in accordance with
IES LM-80 and TM-21
CE Mark - "Conformité Européene" conformity with the
Council of European Communities Directives, meeting
internationally recognized compliance when used with
Halo H750, and H2750 series LED housings only
*Not to be used in direct contact with spray foam insulation
(Consult NEMA LSD57-2013)
ML5606xxx – 600 Series
ML5609xxx – 900 Series
4-1/2"
[114mm]
3"
[76mm]
4-1/2"
[114mm]
3"
[76mm]
ML56 LED System
Tri mModule
+
90 CRI