Specification Sheet

ManualsBrandsHalo ManualsLighting144" 2 Circuit Power-Trac Track for Lazer-by-Halo and Halo Track System

TD518196EN

9/01/2016

Catalog #

Project

Comments

Prepared by

Type

Date

HALO

SPECIFICATION FEATURES

DESCRIPTION

Halo-2 Power-Trac system provides two separate 20 AMP circuits. Each

circuit can be independently switched. Provides maximum flexibility,

with a miniature profile. Suitable for a wide range of commercial,

merchandising and residential applications. Electrical capacity is 20

AMPS per circuit when properly balanced. Installing lampholders is

simple. An adjustable contact allows selection of the circuit position. Lift

or lower the contact until it touches the plastic stop of the assembly. For

circuit #1 move contact to the down position. For circuit #2 move contact

to the up position. Halo 2-Circuit Track accepts both Halo and Lazer-by-

Halo lampholders.

A. Structural

• Extruded aluminum .060”

[1.5mm] nominal wall thickness.

Halo-2 Power-Trac is 11/16”

(17.5mm) deep by 1-3/8” (35mm)

wide. Same as HaloMiniature

Trac.

B. Line Conductors

• Solid copper bus bars [cross

section equivalent to #12 AWG

wire. Encased in rigid extruded

PVC insulators.

C. Insulating Liner

• Rigid extruded polyvinyl

insulators.

D. Ground Conductor

• Exclusive independent

grounding bus conductor.

Maintains an independent

positive ground #12 AWG path

between lampholder, Trac

channel and building’s ground

system.

E. Neutral Conductor

• Cross section equivalent of #12

AWG wire.

F. Polarity Indicator (Neutral)

• Visual polarity groove indicates

proper electrical installation of

lampholder adapter. All Halo-2

Power-Trac is shipped fromthe

factory with a “LEFT” dead end

installed. The L941 Live End

Connector is designed to attach

to the right hand side of the track.

Locate small polarity indicator on

the connector and align with

polarity groove on track.

Listings

• cULus listed for use with Halo

and Lazer-by-Halo lampholders.

Mounting

• Track system is recommended for

ceiling mount only. For alternate

mounting methods consult

factory.

L641, L642, L643

MINIATURE

TWO CIRCUI T

TRAC SYSTEM

Power -Trac

LWH

L641

4' Nominal

L642

8' Nominal

42-5/8"

[1083mm]

1-3/8"

[35mm]

11/16"

[18mm]

90-5/8"

[2302mm]

1-3/8"

[35mm]

11/16"

[18mm]

L643

12' Nominal

138-5/8"

[3521mm]

1-3/8"

[35mm]

11/16"

[18mm]

ORDERING INFORMATION

SAMPLE NUMBER: L651MB

Track Finishes Connectors (Order Separately) Accessories (Order Separately) Current Limiters (Order Separately)

L641= 4’

L642= 8’

L643= 12’

P=White

MB=Black

L900= Outlet Box Cover

L941= Live End Connector

L942= Flexible Connector

L943= Straight/”L” Connector

L945L= Left “T” Connector

L945R= Right “T” Connector

L946= “X” Connector

L947= Conduit Connector

L949= Mini Joiner

L980= Live End Conduit Adapter

L989= Conduit Continuation Kit

DE641=Dead End

Finishes

P=White

MB=Black

L18= 18” Steel Stem

L36= 36” Steel Stem

L48= 48” Steel Stem

L951= Wire Way Cover for Pendant

Assembly Kit

L983= T-Bar Attachment Clip

L992= Pendant Kit assembly

L994= Pendant Adapter

Finishes

P=White

MB=Black

Current Limiter - End Feed

Circuit 1 Breaker

*CB1= Circuit 1 Breaker

LC941CB120= 120W (1A @ 120V)

Circuit 2 Breaker

*CB2= Circuit 2 Breaker

LC941CB1200= 1200W (10A @ 120V)

LC941CB300= 300W (2.5A @ 120V)

LC941CB600= 600W (5A @ 120V)

LC941CB960= 960W (8A @ 120V)

Current Limiter - Center Feed

LC943= LC943

Circuit 1 Breaker

*CB1= Circuit 1 Breaker

LC943CB1200= 1200W (10A @ 120V)

Circuit 2 Breaker

*CB2= Circuit 2 Breaker

LC943CB120= 120W (1A @ 120V)

LC943CB300= 300W (2.5A @ 120V)

LC943CB600= 600W (5A @ 120V)

LC943CB960= 960W (8A @ 120V)

Finishes

P=White

MB=Black

Summary of content (5 pages)

PAGE 1
HALO DESCRIPTION Type Catalog # Halo-2 Power-Trac system provides two separate 20 AMP circuits. Each circuit can be independently switched. Provides maximum flexibility, with a miniature profile. Suitable for a wide range of commercial, merchandising and residential applications. Electrical capacity is 20 AMPS per circuit when properly balanced. Installing lampholders is simple. An adjustable contact allows selection of the circuit position.
PAGE 2
L641, L642, L643 Polarity Indicators Neutral is indicated on two circuit power track by the groove placed along the flange of the track. The connectors show neutral polarity by the arrow on the end of the connector. The left handed T connector, L945L has an arrow facing left when the crossbar of the T is at the bottom, and “Halo-2” is right-reading. The L945R, a right handed T connector has the arrow facing right when the crossbar of the T is at the bottom, and “Halo-2” is right-reading.
PAGE 3
L641, L642, L643 L941 - Live End Connector 41/2" To start a run. Right hand polarity. (Left hand polarity live end connector available. Consult factory). Color codes: P (White), MB (Black) (115mm) 33/8 " (86mm) 13/8 " (35mm) ORDERING INF O RM ATI O N SAMPLE NUMBER: L941P Connector Finish L941= Live End Connector P=White MB=Black 11/16" (17mm) L941 L942 - Flex Joiner To connect two track sections at any angle up to 90,° in either plane or wall to ceiling or pitched ceiling applications.
PAGE 4
L641, L642, L643 L946 - X Connector To connect four track section into a cross configuration. May be used for feed point. Color codes: P (White), MB (Black) 5-3/8" (137mm) O R DE R I NG INFORMATIO N SAMPLE NUMBER: L946P Connector Finish L946= X Connector P=White MB=Black 7-5/8" (194mm) L946 L947 - Conduit Connector A live end connector for use with surface conduit. Designed to accept standard 1/2” conduit fitting (not included). May be used for feed point.
PAGE 5
L641, L642, L643 L989 - Conduit Continuation Kit Includes one left and one right feed. To continue a run around obstructions with 1/2” trade size surface conduit. Color codes: P (White), MB (Black) 1-3/8" (35mm) 1-3/8" (35mm) 1-1/2" (38mm) ORDERING INF O RM ATI O N SAMPLE NUMBER: L989P Connector Finish L989= Conduit Continuation Kit P=White MB=Black 4-7/8" (124mm) L989 L929 - Floating Canopy and Connector 1/4" (6.4mm) Can be connected anywhere along length of Trac.