Installation Guide

ManualsBrandsHalo ManualsLightingML 4 in. Black Integrated LED Recessed Ceiling Light Fixture Retrofit Module at 90 CRI, 900 Lumens, 3000K Soft White

A. LED module

Module DEL

Módulo LED

C. #8 Self-drilling sheet metal screw

Vis à métal autotaraudeuse no 8

Tornillo para plancha de metal

autoperforante n.°8

B. E26 Edison screw base adapter

(For retrofit only - see included

retrofit instructions)

B. Adaptateur pour culot vissé Edison E26

(pour une installation dans le cadre de

travaux de modernisation seulement -

reportez-vous aux instructions relatives

à ce type d’installation)

B. Adaptador Edison E26 con base

enroscable (solamente para adaptación;

consulte las instrucciones incluidas

para adaptación)

E. #8-32 Hex nut

Écrou hexagonal #8-32

Tuerca hexagonal #8-32

D. #8-32 Self tapping screw

Vis autotaraudeuse no 8-32

Tornillo autorroscante N.° 8-32

F. Trim Sold Separtely

Garniture acheté séparément

Comprar por separado recortar

INS #

IB518190ML

ITEMS REQUIRED

(Purchase separately)

•

Screwdriver

•

Gloves

ARTICLES NÉCESSAIRES

(à acheter séparément)

•

Tournevis

•

Gants

ARTÍCULOS NECESARIOS

(se compran por separado)

•

Destornillador

•

Guantes

ML4 Series Instructions

ML4 Directives Serie

ML4 Instrucciónes Serie

Packaging Contents

Contenidos del embalaje

Contenu de l’emballage

Summary of content (8 pages)

PAGE 1
INS # IB518190ML ML4 Series Instructions ML4 Directives Serie ML4 Instrucciónes Serie Packaging Contents Contenidos del embalaje Contenu de l’emballage C. #8 Self-drilling sheet metal screw Vis à métal autotaraudeuse no 8 Tornillo para plancha de metal autoperforante n.° 8 A. LED module Module DEL Módulo LED D. #8-32 Self tapping screw Vis autotaraudeuse no 8-32 Tornillo autorroscante N.° 8-32 B. E26 Edison screw base adapter (For retrofit only - see included retrofit instructions) B.
PAGE 2
ML4 Series IMPORTANT SAFETY INSTRUCTIONS When using product, basic precautions should always be followed, including the following: • Heed all warnings, including below warnings AND those included on product. • HALO® recessed luminaires (fixtures) are designed to meet the latest NEC requirements and are UL/cUL listed in full compliance with UL 1598. Before attempting installation of any recessed lighting luminaire check your local electrical code.
PAGE 3
ML4 Series NON-SCREWBASE LED LUMINAIRES LUMINAIRES À DEL À CULOT NON VISSÉ Risk of Fire/Electric Shock • LED connector is compatible with Halo 4” H995 and Halo H245 Series LED luminaires. • LED connector meets California Title-24 and Washington State high-efficacy luminaire standard as a non-screw base socket. • LED connector is a non-screwbase luminaire disconnect for tool-less installation.
PAGE 4
ML4 Series Figure 2. Figure 3.
PAGE 5
ML4 Series Installation Into Halo H995x and H245 Series LED (Non-Screw Base) Luminaires Risk of Fire/Electric Shock • LED connector meets California Title-24 and Washington State high-efficacy luminaire standard as a non-screw base socket. 1. Plug the orange connector on ML4 LED module (A) into the orange connector included with the luminaire. (Figure 6) 2. Bundle any excess length of wire inside the luminaire in preparation for insertion. 3.
PAGE 6
ML4 Series REWIRING OR UNINSTALLING THE LED MODULE Garnitures Carrées Du Plafonnier Intensif - (Série TL42S et TL44S) 1. Remove magnetically attached trim from ML4 module by pulling downward. 2. Pull down firmly on the module to remove it from the recessed luminaire. 3. Disconnect the LED module wiring from the recessed luminaire (LED connector or screw-in Edison base). 4. Disconnect the dimming wiring from the recessed luminaire (if installed 0-10V ONLY). 5. Remove ground wire from luminaire 1.
PAGE 7
ML4 Series OPTICS 1. The optic can be removed and replaced to provide a different beam angle. To remove optic, twist counter-clockwise. To install, insert optic and twist clockwise. (Figure 11) 2. Also available, is a single/double media holder. To install, place the media onto the media holder. Engage snaps at bottom of snap staircase. Twist clockwise until tight.
PAGE 8
ML4 Series MODIFICATION DE PRODUITS EATON, OU À LA FOURNITURE DE TOUTE PIÈCE DE RECHANGE CONNEXE, LE COÛT DES DOMMAGES NE PEUT DÉPASSER LE COÛT D’ACHAT DU PRODUIT EATON FAISANT L’OBJET DE LA RÉCLAMATION AU TITRE DE LA PRÉSENTE GARANTIE. AUCUN FRAIS DE MAIN-D’OEUVRE NE SERA REMBOURSÉ POUR ENLEVER OU INSTALLER UN BOÎTIER. Tout produit retourné doit comporter un numéro d’autorisation de retour de produit fourni par l’entreprise et être expédié port payé.