Recessed Lighting ML Collection
Introduction The ML Concept The HALO™ Modular LED recessed lighting system provides a broad range of lighting solutions ideal for residential and commercial use including single and multi-family dwellings, hospitality, retail, office and institutional spaces. The ML family delivers the energy savings, long life and sustainability of LED with excellent optical control providing cost effective and visually comfortable lighting.
The US Environmental Protection Agency’s ENERGY STAR® program is designed to identify and promote energy efficient products and buildings. Eaton’s lighting business is proud to be an industry leader of certified products including many of our Halo recessed downlights. www.energystar.gov International Energy Conservation Code (IECC) establishes energy-related heating, cooling, water heating, electrical and lighting system standards for residential, multi-family, and commercial buildings. www.iccsafe.
D2W™ Select ML combinations are available in the D2W dim-to-warm option mimicking the black body dimming response of tungsten halogen lamps warming the output from approximately 3000 to 1850K CCT. Dimming Profile 2,600 2,200 100% 75% 50% 1,800 0% 25% % of Lumen Output Typical Incandescent 4 EATON Typical Halogen Recessed downlighting: ML collection ML56 D2W CCT (°K) 3,000 - Dims smoothly from 3000K to 1850K creating a rich, warm glow within the space.
Lighting Control Solution Set the mood Eaton dimmers offer versatile options to set the mood and reduce energy consumption. These compatible LED dimmers are ideal for both residential and light commercial applications and are compatible with decorator (screwless) style devices and wallplates. The Halo D2W technology works with any dimmer that is compatible with Halo LED ML products. Refer to www.eaton.com for additional information. Smart (AAL06) Decorator (DAL06P) Slide (SAL06P) Simple. Smart. Secure.
ML4 4-inch LED downlighting system The ML4 system is comprised of a housing, LED module, and round or square 2-inch aperture pinhole trims. This compact assembly installs from below the ceiling in standard 4-inch line voltage housings suitable for 2x6 residential framing or shallow plenum commercial construction. For even tighter spacing an ultra-shallow install from below housing is available and is suitable for 2x4 framing.
Housing + Module + Trim = Complete luminaire Simple, compact, accurate 7
ML4 Module / Optic Balance efficiency with optical control The ML4 module combines a chip on board LED array, driver and heat sink into an integrated light engine providing a highly efficient and reliable source of light. The precision molded optic organized the source flux producing tightly controlled and useful beams of light. The ML4 module can be ordered with either the 25° narrow flood or 40° flood optics preinstalled and are suitable for a wide range of applications.
ML4 optics TIR45SP15 15 degree spot TIR45NFL25 25 degree narrow flood TIR45FL40 40 degree flood TIR45WFL55 55 degree wide flood TIR50AWW25 25 degree narrow flood asymmetric / wall wash TIR45MH12PK media holder with lens replacement media holder installed on optic ML4 Ordering Information A complete luminaire consists of a housing, LED module and trim. Order separately.
ML4 Trims The finishing touch TL4 series trims are offered in four luxurious electroplated finishes; brushed nickel, oil rubbed bronze, brushed copper and German bronze. Use to complement your thoughtfully selected interior finishes. white The TL4 trims are available in three trim types; open, lens, and lens wall wash. The trims are attached by four powerful rare earth Neodymium magnets; they float on a bubble of magnetic flux keeping the trims held securely in place.
german bronze brushed nickel brushed copper oil rubbed bronze
Open pinhole The round and square open pinhole apertures are optimized for use with beam forming optics delivering full output with visual cutoff and brightness control. Magnetic attachment makes installation a snap and allows for minor adjustment accommodating real-world construction tolerances. Available in painted and electro-plated finishes. Damp location listed.
Lens pinhole The round and square lens pinhole apertures soften the light with an integral diffuse lens. Magnetic attachment makes installation a snap and allows for minor adjustment accommodating real-world construction tolerances. Available in painted and electro-plated finishes; the lens frame is available in white or black and color coordinated with the flange finish. Wet location listed.
Lens wall wash The round and square lens wall wash apertures use the unique asymmetric optic that redirects light through a linear spread lens providing smooth vertical illumination. Use to light walls, paintings and textured surfaces including stone, masonry and wood. Magnetic attachment makes installation a snap and allows for minor adjustment accommodating real-world construction tolerances. The lens frame is available in white or black and color coordinated with the flange finish. Wet location listed.
Providing Accents The asymmetric / wall wash optic combined with the open and lens pinhole apertures delivers a directional beam of light effective for accenting objects of interest including art and architecture. The aiming angle is pre-set at 22.5 degrees, a useful mid-point adjustment, eliminating the need for individual elevation adjustment. This simple yet effective lighting technique provides contrast ratios creating visual interest and drama in your environments.
Housings ML4 Housing Compatibility Halo LED H995ICAT, H995RICAT Halo Shallow Housings H99ICAT, H99RTAT, H99TAT, H1499ICAT, H1499RTAT, H1499T75, H1499TAT, E4ICATSB, E4TATSB, E4RTATSB Halo Ultra-Shallow Housings H245ICAT, H245RICAT Halo Surface Mount Housings HS4RMW, HS4RMB, HS4SMW, HS4SMB Halo 4” LED housings H995ICAT 16 EATON Recessed downlighting: ML collection H995RICAT
Competitor Housing Compatibility The ML4 comes with a dedicated LED connector for High Efficacy luminaire compliance (California Title 24, International Energy Conservation Code) and is cULus Listed for installation with Halo® recessed LED housings (H245ICAT, H245RICAT, H995ICAT, H995RICAT). The ML4 is also compatible with a E26 Edison screw base adapter to accomodate many industry standard screw base housings. The series is cULus Listed and UL Classified for retrofit in Halo and others housings.
Ultra-shallow housings H245ICAT / H245RICAT H245ICAT - Suitable for 2x4 framing and shallow plenum construction Housing adjusts for 1/2” to 1-1/4” ceiling thickness Suitable for direct contact with air-permeable insulation and air tight Captive, pre-installed Got Nail!™ bar hangers adjust from 6” to 24”, integral nail penetrates standard and engineered lumber - Slide-N-Side™ non-metallic (NM) wire traps allow wiring outside the box, 4-port push wire nuts for quick and reliable mains voltage connections 1
Surface Housing Square and round surface mount - round or square housing mounts to junction box - spider plate allows alignment of square with architecture - exclusively for use with Halo ML4 LED module and trims - finishes: matte white and matte black Surface Mount Housing Finish HS4R= Surface round, 120-277V HS4S= Surface square, 120-277V MW=Matte white MB=Matte black 19
ML56 LED downlighting system The Halo ML56 LED downlight collection is comprised of LED modules with 5” and 6” trims. ML56 LED modules are offered in three lumen packages across the 600, 900, and 1200 series - a versatile collection of energy-efficient LED downlights for general lighting in commercial and residential applications. The Halo ML56 LED 600, 900, 1200 series modules are for either new construction or retrofitting existing 5” and 6” compatible housings (Edison screw base adapter included).
Housing + Module + Trim = Complete luminaire high performance for volumetric spaces *E26 Edison Screw Base Adapter (included for retrofit of non-LED housings).
ML56 Module LED light engine The ML56 light modules are integrated LED engines that include a LED chip package, LED driver, heat sink, and lens in a modular design that allows interchangeable use with designated ML56 5” and 6” LED trims. The ML56 light module design features an inside frost diffusing lens that looks like a traditional lamp for visual comfort and aesthetic familiarity. The diffusing lens provides uniform illumination.
1200 Series module For the 1200 series LED light modules, the diffusing lens is interchangable with an optional 25° Narrow Flood (NFL) beam forming lens.
Trims The finishing touch Multiple 5” and 6” baffle, reflector, and eyeball options allow the Halo ML56 LED downlighting system to be used in a variety of interior spaces. Choose the desired trim size, finish, and style to meet the needs of the application. - Reflector and baffle trims are wet location listed for shower applications. Eyeball trims are damp location listed. - Reflector and baffle trims make the ML56 and any compatible housing Air-Tite.
Reflectors Baffles Create wide light patterns and maximize the efficiency of the light source. Trap and shape light to minimize aperture glare, reduce ceiling brightness, and narrow the focus of the downlighting beam. Trim Ring Finishes white satin nickel Eyeballs Wall Washer Provide precise, variable directional lighting. Useful for directing to accent wall hangings, mantels, and task areas Provide same vertical surface illumination.
5” Trims 591 592 595 596 5” “dead front” shallow baffle 5” reflector 5” wall wash 5” shallow baffle 591WB white “dead front” shallow baffle (for 600 Series module only) 592W white 595WW specular reflector 596WB white shallow baffle and trim 592SC specular clear 592H haze 593 594 5” baffle 5” eyeball 593WB white baffle and trim 593BB black baffle, white trim 593SN satin nickel baffle and trim 593TBZ tuscan bronze baffle and trim 594WB white 594SN satin nickel 594TBZ tuscan bronze Acc
6” Trims 691 692 695 696 6” “dead front” shallow baffle 6” reflector 6” wall wash 6” shallow baffle 691WB white “dead front” shallow baffle (for 600 Series module only) 692W white 695WW specular reflector 696WB white shallow baffle and trim 692SC specular clear 692H haze 693 694 6” baffle 6” eyeball 693WB white baffle and trim 693BB black baffle, white trim 693SN satin nickel baffle and trim 693TBZ tuscan bronze baffle and trim 694WB white 694SN satin nickel 694TBZ tuscan bronze Acc
Housings ML56 Housing Compatibility Halo LED 6-inch: H750ICAT, H750RICAT, H750T, H750TCP, H2750ICAT, H2750RICAT, E750ICAT, E750RICAT 5-inch: H550ICAT, H550RICAT, E550ICAT, E550RICAT Halo LED retrofit 6-inch: ML7E26RFK, ML7BXFK Halo Standard Housings 6-inch: H7ICAT, H7RICAT, H7ICT, H7RICT, H7ICATNB, H7ICTNB, H7T, H7RT, H7TNB, H7TCP, H7UICAT E7ICAT, E7RICAT, E7ICATNB, E7TAT, E7RTAT, E7TATNB 5-inch: H5ICAT, H5RICAT, H5ICATNB, H5T, H5TNB, H5RT E5ICAT, E5RICAT, E5ICATNB, E5TAT, E5TATNB, E5RTAT Halo Shallow Hous
Halo 5” LED housings H550ICAT Halo 6” LED housings H550RICAT H750ICAT H750RICAT H2750ICAT H2750RICAT Housings Halo LED 6-inch H750ICAT= 6” LED, Insulated Ceiling, Air-Tite, New Construction Housing H750RICAT= 6” LED, Insulated Ceiling, Air-Tite, Remodel Housing H750T= 6” LED, Non-IC, Air-Tite, New Construction Housing H750TCP= 6” LED, Non-IC, New Construction/Remodel Chicago Plenum Housing H2750ICAT= 6” LED, Shallow, Insulated Ceiling, Air-Tite, New Construction (use with 691X, 694X, 696X trims only
Competitor Housing Compatibility 5" Housings The ML56 LED light module - trim combination is cULus Listed or UL Classified for use with any 5” or 6” diameter recessed housing constructed of steel or aluminum with an internal volume that exceeds 115 in3 in addition to those noted. The ML56 system is UL Classified for retrofit in select 5” and 6” incandescent housings by others.
Richard Cadan Photography www.richardcadan.
Lighting Product Lines Ametrix AtLite Corelite Ephesus Fail-Safe Halo Halo Commercial Invue io Iris Lumark Lumière McGraw-Edison Metalux MWS Neo-Ray Portfolio RSA Shaper Streetworks Sure-Lites Controls Product Lines Fifth Light Technology Greengate iLight (International Only) iLumin Zero 88 Connected Lighting Systems Distributed Low-Voltage Power HALO Home iLumin Plus LumaWatt Pro WaveLinx Eaton 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 www.eaton.
