Instructions / Assembly

Instruction Manual/Instrucciones
Questions?/¿Preguntas? 1-800-334-6871 [e-mail]
1
•Disassemblyofyourxturewillvoidthewarranty.
SAVE THESE INSTRUCTIONS.
FOR BEST RESULTS
•Installthemotionsensor/transmitter8-12feet
 abovetheground.(Motionsensorislesssensitive
 above12feet.)
•Locatemotionsensorsomotionmovesacross
 detectionzone(Fig.1).
•Locatesensorawayfromheatproducingsourcesto
 preventfalsetriggering.Alsobeverycarefulnotto
 includeobjectssuchaswindows,whitewallsand
 waterinthedetectionzone.
•Locatesensorawayfrommovingobjectssuchas
 trees,largeshrubsandstreettrafc.
•Donotinstallmorethanonemotionactivated
 oodlightononewallswitchorthesamecircuitsince
 thismaycauseinterferencebetweenxtures.
MOUNTING AND WIRING YOUR FIXTURE
WARNING: Risk of electric shock. Disconnect
power at fuse or circuit breaker before installing
or servicing.
NOTE:Fixturecanbewalloreavemounted.
NOTE:Coverplatemountstorecessedmounted
standardjunctionboxes(Fig.2).Junctionboxmustbe
atleast1-1/2inchindepthforproperinstallationfor
recessedmountapplication.
1. Turnoffpoweratmainfuse/breakerbox.
2. Matchupscrewholesontheoodlightcoverplate
withthejunctionboxscrewholes.
3. Threadxturewiresthroughcoverplate
 gasket(B)(Fig.3).
4. Connectxtureblackwiretohouseblackwire
andconnectxturewhitewiretohousewhitewire
usingwirenuts(E)provided(Fig.3).(Noground
wireisrequired.Attachanygroundwirefromyour
housetojunctionbox.)
5. Attachxture(A)tothejunctionboxwithtwo
mountingscrews(D)provided.
6. Applysiliconecaulkaroundtheedgesofthe
coverplatetoprovideawatertightsealfromrain
andmoisture.
7. Insertlampholdergaskets(C)intolampholder
assembly,tightlyagainstlampholder,andscrew
bulbsintoeachlampholder(Fig.3).(Donot
overtightenbulbs.)
PACKAGING CONTENTS/CONTENIDO DEL PAQUETE
ITEMS REQUIRED
(Purchase separately)
•Phillipsscrewdriver
•Hammer
•Outdoorweatherproofsiliconecaulking
•(2)150watt(MAX)PAR38oodlightbulbs
NOTE:Thisxturewasdesignedtoworkwithupto150wattmaximumPARhalogenood
bulbs.Forimprovedenergyefciency,lowerwattagePARhalogenoodbulbsmaybeused.
CompactFluorescent(CFL)bulbscontainelectronicswhichmayinterferewiththemotion
sensingfunctionofyourxtureandarenotrecommended.
HOW IT WORKS
Yourmotionactivatedoodlightsensesheatimagesfrom
objectssuchaspeople,largeanimalsandautomobileengines.
Whenmotionisdetected,thelightswillautomaticallyturn
on.Oncemotionhasstopped,thelightswillturnoffaftera
preselectedtimedelay.Yourmotionactivatedoodlightmay
alsobeusedasastandardoodlight.
WARNINGS AND CAUTIONS
•Readtheseinstructions.
•Keeptheseinstructions.
•Heedallwarnings.
•Followallinstructions.
•Foroutdooruseonly.
•cULusLISTEDforwetlocations.
•Connectxturetoa120volt,60Hzpowersource.Anyotherconnectionvoidsthewarranty.
•Fixtureshouldbeinstalledbypersonswithexperienceinhouseholdwiringorbyaqualied
 electrician.Theelectricalsystem,andthemethodofelectricallyconnectingthexturetoit,
 mustbeinaccordancewiththeNationalElectricalCodeandlocalbuildingcodes.
•Fixtureshouldbemountedtoagroundedrecessedmountedstandardjunctionboxmarked
 foruseinwetlocations.
•NOTsuitableforgroundmountinstallation.
•Keepawayfromammableobjects.Donotpositionxturewithin
 twoinchesofanycombustiblematerials.
•Alwaysreplacebulbwiththesamewattageorlowerwattagethanincluded.Installinga
 bulbofahigherwattagecouldcreatearehazard.Useofahigherwattagebulbwillvoid
 thewarranty.
•Donotallowsensorheadtotouchlighthousing–maintainatleast1inchspacebetween
 xtureandsensor.
•Forproperoperationandprotectionagainstdamage,themotionsensorheadadjustment
 knobsmustbefacingtheground.
•MINIMUM90°CSUPPLYCONDUCTORS.
MS34 (Black)
MS34W (White)
ENGLISH
Upto
60feet
110degrees
D. (2) #6 and (2) #8 mounting screws
(use the size that fits your junction box)
(2) Tornillos #6 y (2) tornillos #8 de montaje
(utilice el tamaño que mejor se adecue a
su caja de conexión)
Fig.1
A. Motion detector and light fixture
Detector de movimiento y
artefacto de luz
B. Coverplate gasket
Junta de la placa de cubierta
C. (2) Lampholder gaskets
(2) Juntas obturadoras
del receptáculo
E. (2) Wire nuts
(2) Tuercas para alambre
Fig.2
OctagonalRound
1-1/2inch 1-1/2inch
Fig.3
Wallmount
Eavemount
A
D
A
B
E
E
C
D
C