Instructions / Assembly

ENGLISH

Congratulations. You have purchased a Cooper Lighting, LLC 300 watt

halogen floodlight. The PWT250 is constructed of durable plastic and should

provide years of trouble free weatherproof service.

What you need

• Screwdriver

• Weatherproof silicone caulking

• (2) 150 watt (max) PAR 38 floodlight bulbs

Note: This fixture was designed to work with

up to 150 watt maximum PAR flood bulbs.

For improved energy efficiency, lower wattage

PAR or CFL Flood Bulbs can be used.

What’s included

• Light fixture (A)

• Gasket (B)

• (2) Screws (C)

• (2) Wire nuts (D)

What to know

PLEASE READ THESE IMPORTANT SAFETY INSTRUCTIONS.

• For outdoor use only.

• UL and cUL LISTED for use in wet locations.

• Fixture must be connected to a 120 Volt, 60 Hz power source (any other

connection voids warranty).

• Fixture should be mounted to a grounded junction box marked for use

in wet locations.

• Keep away from flammable objects. Do not position fixture

within one inch of any combustible materials.

• The bulb and fixture get extremely hot during use. Allow fixture

to cool completely before attempting to reposition fixture.

• Always replace bulb with the same wattage or lower wattage bulb. Installing

a bulb of a higher wattage could create a fire hazard. Use of a higher

wattage bulb will void the warranty.

• Disassembly of your fixture will void the warranty.

• Fixture should be installed by persons with experience in household wiring or

by a qualified electrician. The electrical system, and the method of electrically

connecting the fixture to it, must be in accordance with the National Electrical

Code and building codes.

PWT250BR (Bronze)

PWT250WH (White)

Call for customer service and/or missing or damaged parts (800-334-6871)

PWT250BR_WH 825-0156.qxd:PWT250PCW_PC I.S. 325-.qxd 5/19/08 5:45 PM Page 2