Installation Guide

ManualsBrandsHalo ManualsLightingRL 4 in. 2700K Warm White Color Temperature Remodel Recessed Integrated LED Kit (6-Pack) with All Load Dimmer

A. LED module

Module DEL

Módulo LED

E. #8-32 Hex nut

Écrou hexagonal #8-32

Tuerca hexagonal #8-32

F. Gasket (Use as applicable,

per local code)

Joint d’étanchéité (le cas échéant,

selon le Code local)

Junta (utilícela según corresponda,

de acuerdo con el código local)

C. #8 Self-drilling sheet metal screw

Vis à métal autotaraudeuse no 8

Tornillo para plancha de metal

autoperforante n.°8

B. E26 Edison screw base adapter

(For retrofit only - see included

retrofit instructions)

Adaptateur pour culot vissé Edison E26

(pour une installation dans le cadre de

travaux de modernisation seulement -

reportez-vous aux instructions relatives

à ce type d’installation)

Adaptador Edison E26 con base

enroscable (solamente para adaptación;

consulte las instrucciones incluidas

para adaptación)

D. #8-32 Self tapping screw

Vis autotaraudeuse no 8-32

Tornillo autorroscante N.° 8-32

INS #

IB518008EN

ITEMS REQUIRED

(Purchase separately)

•

Screwdriver

•

Gloves

ARTICLES NÉCESSAIRES

(à acheter séparément)

•

Tournevis

•

Gants

ARTÍCULOS NECESARIOS

(se compran por separado)

•

Destornillador

•

Guantes

RL460 Series Instructions

RL460 Directives Serie

RL460 Instrucciónes Serie

Packaging Contents

Contenidos del embalaje

Contenu de l’emballage

Summary of content (6 pages)

PAGE 1
INS # IB518008EN RL460 Series Instructions RL460 Directives Serie RL460 Instrucciónes Serie Packaging Contents Contenidos del embalaje Contenu de l’emballage C. #8 Self-drilling sheet metal screw Vis à métal autotaraudeuse no 8 Tornillo para plancha de metal autoperforante n.° 8 A. LED module Module DEL Módulo LED D. #8-32 Self tapping screw Vis autotaraudeuse no 8-32 Tornillo autorroscante N.° 8-32 E. #8-32 Hex nut Écrou hexagonal #8-32 Tuerca hexagonal #8-32 B.
PAGE 2
RL460 Series IMPORTANT SAFETY INSTRUCTIONS When using product, basic precautions should always be followed, including the following: • Heed all warnings, including below warnings AND those included on product. • HALO® recessed luminaires (fixtures) are designed to meet the latest NEC requirements and are UL/cUL listed in full compliance with UL 1598. Before attempting installation of any recessed lighting luminaire check your local electrical code.
PAGE 3
RL460 Series The RL4 is UL Listed or Classified for use with any 4” diameter recessed luminaire constructed of steel or aluminum with an internal volume that exceeds 62.3” in3 addition to those noted below: HALO®: H99ICAT, H99RTAT, H99TAT, H995ICAT, H995RICAT, H99T, H99RT, H99ICT • ALL-PRO™: EI400ATSB, ET400ATSB, ET400RATSB For additional information, please refer to the latest Halo LED Specification sheet found at www. haloltg.com.
PAGE 4
RL460 Series Figure 2. Figure 3.
PAGE 5
RL460 Series REWIRING OR UNINSTALLING THE LED MODULE 1. Twist the module (about 60º) counterclockwise to release the grip of the friction clips to the luminaire. 2. Pull down firmly on the module to remove it from the recessed luminaire. 3. Disconnect the LED module wiring from the recessed luminaire (LED connector or screwin Edison base). 4.
PAGE 6
of this warranty and are inspected when packed. Evident or concealed damage that is made in transit should be reported at once to the carrier making the delivery and a claim filed with them. Reproductions of this document without prior written approval of Cooper Lighting, LLC are strictly prohibited.