Installation Guide

REWIRING OR UNINSTALLING
THE LED MODULE
1. Twist the module (about 60º) counterclock-
wise to release the grip of the friction clips
to the luminaire.
2. Pull down firmly on the module to remove it
from the recessed luminaire.
3. Disconnect the LED module wiring from the
recessed luminaire (LED connector or screw-
in Edison base).
4. Remove ground wire from luminaire
5-YEAR LIMITED WARRANTY
THE FOLLOWING WARRANTY IS EXCLUSIVE
AND IN LIEU OF ALL OTHER WARRANTIES,
WHETHER EXPRESS, IMPLIED OR STATUTORY
INCLUDING, BUT NOT LIMITED TO, ANY
WARRANTY OF MERCHANTABILITY OR
FITNESS FOR ANY PARTICULAR PURPOSE.
Cooper Lighting, LLC (“Cooper Lighting”) war-
rants to customers that, for a period of five
years from the date of purchase, Halo RL4 LED
series products will be free from defects in
materials and workmanship. The obligation of
Cooper Lighting under this warranty is expressly
limited to the provision of replacement products.
This warranty is extended only to the original
purchaser of the product. A purchaser’s receipt
or other proof of date of original purchase
acceptable to Cooper Lighting. This is required
before warranty performance shall be rendered.
This warranty does not apply to Cooper Lighting
products that have been altered or repaired or
that have been subjected to neglect, abuse, mis-
use or accident (including shipping damages).
This warranty does not apply to products not
manufactured by Cooper Lighting which have
been supplied, installed, and/or used in conjunc-
tion with Cooper Lighting products. Damage to
the product caused by replacement bulbs or cor-
rosion or discoloration of brass components are
not covered by this warranty.
LIMITATION OF LIABILITY:
IN NO EVENT SHALL COOPER LIGHTING
BE LIABLE FOR SPECIAL, INDIRECT,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES
(REGARDLESS OF THE FORM OF ACTION,
WHETHER IN CONTRACT, STRICT LIABILITY,
OR IN TORT INCLUDING NEGLIGENCE),
NOR FOR LOST PROFITS; NOR SHALL THE
LIABILITY OF COOPER LIGHTING FOR ANY
CLAIMS OR DAMAGE ARISING OUT OF OR
CONNECTED WITH THESE TERMS OR THE
MANUFACTURE, SALE, DELIVERY, USE,
MAINTENANCE, REPAIR OR MODIFICATION
OF COOPER LIGHTING PRODUCTS, OR
SUPPLY OF ANY REPLACEMENT PARTS
THEREFORE, EXCEED THE PURCHASE PRICE
OF COOPER LIGHTING PRODUCTS GIVING
RISE TO A CLAIM. NO LABOR CHARGES
WILL BE ACCEPTED TO REMOVE OR INSTALL
FIXTURES.
All returned products must be accompanied by
a Return Goods Authorization Number issued
by the Company and must be returned freight
prepaid. Any product received without a Return
Goods Authorization Number from the Company
will be refused.
Cooper Lighting, LLC is not responsible for
merchandise damaged in transit. Repaired or
replaced products shall be subject to the terms
MONTAGE
emarque:R Un joint d’étanchéité en mousse
est fourni pour une installation conforme au
Code local.
1. Effectuez le câblage adéquat de l’appareil
comme indiqué au chapitre « CÂBLAGE » de
ces instructions.
2. Assurez-vous que les trois colliers de friction
sont complètement ouverts en les tournant,
comme indiqué. (Fig. 7)
3. Alignez le module avec le centre du luminaire
encastré et appuyez fermement sur le mod-
ule pour l’y insérer. Assurez-vous que tout
le câblage demeure à l’écart des colliers de
friction pour éviter de le coincer. Une fois le
module en place, tournez-le légèrement vers
la droite de manière à éliminer tout espace
entre le plafond et la face de la garniture du
module.
RÉNOVATION DE CÂBLAGE OU
DÉSINSTALLATION DU MODULE DEL
1. Tournez le module (environ 60°) vers la
gauche pour déclencher et relâcher les col-
liers de friction du luminaire.
2. Tirez fermement le module vers le bas pour
le retirer du luminaire encastré.
3. Débranchez le câblage du module DEL du
luminaire encastré (connecteur DEL ou culot
à vis Edison).
4. Retirez le fil de mise à la terre du luminaire.
GARANTIE LIMITÉE DE 5 ANS
LA PRÉSENTE GARANTIE CONSTITUE LA
SEULE GARANTIE POUR CE PRODUIT ET
PRÉVAUT SUR TOUTE AUTRE GARANTIE,
QU’ELLE SOIT EXPRESSE OU TACITE Y
COMPRIS, SANS TOUTEFOIS S’Y LIMITER,
TOUTE GARANTIE DE QUALITÉ MARCHANDE
ET POUR UN USAGE PARTICULIER.
Cooper Lighting, LLC (« Cooper Lighting »)
garantit aux acheteurs que, pendant une période
de cinq ans à compter de la date d’achat, les
produits RL4 de Halo seront exempts de défauts
de matériaux et de fabrication. L’obligation de
Cooper Lighting, au titre de la présente garan-
tie, est exclusivement limitée à la fourniture de
produits de remplacement. Cette garantie n’est
valide que pour le premier acheteur du produit.
Tout reçu d’achat ou toute autre preuve d’achat
originale et datée est accepté par Cooper
Lighting. Cette preuve est requise avant toute
mise en œuvre de la garantie.
La garantie ne s’applique pas aux produits
Cooper Lighting qui ont été modifiés ou réparés,
ou qui ont fait l’objet d’une négligence ou d’un
usage abusif ou inapproprié, ou qui ont été
endommagés en raison d’un accident (y compris
durant le transport). Cette garantie ne s’applique
pas aux produits qui ne sont pas fabriqués par
Cooper Lighting et qui ont été fournis, instal-
lés et/ou utilisés avec des produits Cooper
Lighting. Les dommages au produit causés par
une ampoule de rechange ou la corrosion, et la
décoloration des pièces de laiton ne sont pas
couverts par cette garantie.
LIMITATION DES RESPONSABILITÉS :
COOPER LIGHTING NE SERA EN AUCUN
CAS TENU RESPONSABLE DES DOMMAGES
SPÉCIAUX, INDIRECTS, ACCESSOIRES
ET CONSÉCUTIFS (QUELLE QUE SOIT LA
MONTAJE
ota:N Se ha suministrado una junta de goma
espuma redonda para la instalación en caso
de que el código local lo exija.
1. Haga el cableado de la unidad correctamente
como se lo indica en la sección CABLEADO
de estas instrucciones.
2. Asegúrese de que los tres ganchos de fricción
estén completamente extendidos girando los
ganchos como se muestra. (Figura 7)
3. Alinee el módulo en el centro de la luminaria
empotrada y presione dicho módulo con fir-
meza hacia dentro de la luminaria. Corrobore
que todos los cables estén lejos de los
ganchos de fricción, a fin de evitar pellizcar-
los. Luego de presionarlo en su lugar, gire
levemente el módulo en sentido horario para
eliminar cualquier espacio entre el techo y la
parte frontal de la moldura del módulo.
RECABLEADO O DESINSTALACIÓN DEL
MÓDULO LED
1. Gire el módulo en sentido antihorario (a
aproximadamente 60°) para liberar la sujeción
de la luminaria por los ganchos de fricción.
2. Tire con firmeza hacia abajo del módulo para
extraerlo de la luminaria empotrada.
3. Desconecte el cableado del módulo LED de
la luminaria empotrada (el conector LED o la
base Edison enroscable).
4. Retire el cable a tierra de la luminaria.
GARANTIA LIMITADA DE 5 AÑOS
LA SIGUIENTE GARANTÍA ES EXCLUSIVA
Y REEMPLAZA A TODAS LAS DEMÁS
GARANTÍAS, YA SEAN IMPLÍCITAS, EXPLÍCITAS
O ESTATUTARIAS, INCLUIDAS, ENTRE OTRAS,
LAS GARANTÍAS DE COMERCIABILIDAD E
IDONEIDAD PARA UN FIN PARTICULAR.
Cooper Lighting, LLC (“Cooper Lighting”) garan-
tiza a los clientes que, durante un período de
cinco años a partir de la fecha de compra, los
productos Halo RL4 estarán libres de defectos
de materiales y mano de obra. La obligación
de Cooper Lighting bajo esta garantía queda
expresamente limitada a la provisión de los pro-
ductos de repuesto. Esta garantía se extiende
solo al comprador original del producto. Un
recibo del comprador u otra prueba de la fecha
de la compra original aceptable para Cooper
Lighting. Esto es necesario antes de dar cuenta
de un mal rendimiento bajo garantía.
Esta garantía no se aplica a los productos de
Cooper Lighting que hayan sido alterados o
reparados o que estuvieron sujetos a negli-
gencia, abuso, mal uso o accidente (incluso
los daños durante el envío). Esta garantía no
se aplica a los productos Cooper Lighting no
fabricados por Cooper Lighting que hayan sido
suministrados, instalados o utilizados junto con
los productos Cooper Lighting. Los daños del
producto causados por bombillas de reemplazo,
corrosión o decoloración de los componentes de
latón no están cubiertos por esta garantía.
LIMITACIÓN DE RESPONSABILIDAD:
COOPER LIGHTING NO SERÁ RESPONSABLE
LEGAL EN NINGÚN CASO DE DAÑOS
INDIRECTOS, ACCIDENTALES O RESULTANTES
(SIN IMPORTAR LA ACCIÓN LEGAL, YA
SEA POR CONTRATO, RESPONSABILIDAD
ESTRICTA O DE FORMA EXTRACONTRACTUAL
5
RL460 Series
EATON IB518008EN installation instructions