Dimensions Guide

DESCRIPTION
The Halo RL560 is a complete LED Baffle-Trim Module for 5” and
6” aperture recessed downlights; suitable for new construction,
remodel and retrofit installation. The RL560 is cULus Listed for
use with Halo and All-Pro, and is UL Classified for use with other
compatible 5” and 6” housings. The RL560 with integral LED driver
offers 120 volt dimming capability. The RL560 lens provides uniform
illumination and wet location listing. The die-cast construction
makes any housing AIR-TITE for added HVAC savings and code
compliance.
SPECIFICATION FEATURES
RL560WH
†
White
RL560SN
†
Satin Nickel
80CRI
2700K, 3000K and 3500K
90CRI (white only)
3000K and 3500K
5-Inch / 6-Inch LED
Recessed Retrofit
Module-Trim
FOR USE IN
INSULATED CEILING
AND NON- INSULATED
CEILING RATED
HOUSINGS
HIGH EFFICACY LED
WITH INTEGRAL
DRIVER - DIMMABLE
www.cooperlighting.com
ADV131344
August 29, 2013 9:30 AM
MECHANICAL
Module - Trim
• Moduleconstructionincludes
LED, heat sink, reflector, lens,
baffle and trim ring
• Durabledie-castaluminum
construction
• Regressedbaffle
• Heatsinkdesignedtoconduct
heat away from the LED
keeping the junction
temperatures below specified
maximums, even when
installed in insulated ceiling
environments
• Halomattewhitepaintfinish
• Halosatinnickelplatedfinish
Lens
• Regressedlens
• Impact-resistantpolycarbonate
• Convexformforlamp-like
appearance
• Highlumentransmission
•Diffusingforevenillumination
MOUNTING
Torsion Spring Brackets
• Pre-installedprecisionformed
torsion spring brackets secure
torsion springs and adjust
to fit 5” or 6” compatible
housings
5” & 6” Friction Blade Kit
• Precisionformedfriction
blades included
• Providealternativeto
torsion springs for retrofit in
5” and 6” housings without
torsion spring mounting tabs.
• Frictionbladedesignallows
the RL560 to be installed
in any position within the
housing aperture (360
degrees).
• ReplacementKit:model 
RL56CLIP
Housing Compatibility
See Housing Compatibility
LED
• ColorTemperature(CCT)
†
 Options:2700K,3000K,and
  3500K
• ColorRenderingIndex(CRI)
†
Options: 83 and 92
• Lumenmaintenance: 
L70 at 50,000 hours projected
in accordance with
IES TM-21
•LEDisachiponboarddesign
consisting of a multiple LED
package with proximity
phosphor coating to create one
virtual white light source for a
productive “cone of light”
ELECTRICAL
Power Connections
• LEDconnectorisanon-screw
base luminaire disconnect
offering easy installation with
the matching Halo 5” H550
Series and 6” H750 Series
housings.
• LEDConnectormeets 
California Title-24 high-efficacy
luminaire requirement for a
non-screw base socket, and
where required to qualify as a
high-efficacy luminaire.
• TheincludedE26medium
screw-base Edison adapter
provides easy retrofit of
incandescent housings (see
Housing Compatibility).
Ground Connection
• Separategroundingcable
included on the module
for attachment to the housing
during installation.
LED Driver
• Dimmabledriverisa120Volt,
high efficiency, electronic
power supply providing DC
power to the LED.
• DrivermeetsFCCEMI/RFI
Consumer Level limits for use
in residential and commercial
installations.
• Driverfeatureshighpower
factor, low THD, and has
integral thermal protection in
the event of over temperature
or internal failure.
Dimming
• TheHaloRL560LEDmodule
is designed for dimming
capability to 10% in normal
operation with standard 120V
electronic low voltage,
LED-Rated, and many
incandescent dimmers.
The RL560 has dimming
capability to 5% with select
dimmers with low end trim
adjustment. (Consult dimmer
manufacturer for dimmer
compatibility and details.
Note, some dimmers require a
neutral in the wallbox.
Warranty
Cooper Lighting provides a five
year limited warranty on RL56
LED.
Compliance
Labels
• UL/cULListed1598Luminaire
(with listed Halo and All-Pro
housings)
• ULClassified(withother
housings - see Housing
Compatibility)
• UL/cULListedforDamp 
Location
• UL/cULListedforWetLocation
– Shower Applications
• IP56IngressProtectionrated
• Maybeinstalledinhousings
in direct contact with air
permeable insulation** and
combustible material
Qualification
• ENERGYSTAR
®
qualified
residential and commercial*
• CanbeusedforStateof
California Title 24 high efficacy
luminaire compliance*
• CanbeusedforInternational
Energy Conservation Code
(IECC) high efficacy luminaire
compliance
IC and AIR-TITE™
Certified under ASTM-E283
andlistedUL/cUL1598with
compatible housings, may
be used to meet insulated
ceiling** and restricted air-flow
requirements such as:
• WashingtonStateEnergy
Code
• InternationalEnergy
Conservation Code (IECC)
• NewYorkStateEnergy
Conservation Construction
 Code(NY-ECCC)
• StateofCaliforniaTitle24
“Recessed Luminaires in
Insulated Ceilings.”
Catalog #
Project
Comments
Prepared by
Type
Date
HALO
*
Qualied and compliant. Refer to ENERGY STAR
®
Qualied Products List and CEC (T24) Appliance
Database for listings.
** Not for use with housings in direct contact with spray foam insulation.
†
See ordering information table for available models.
2700K nominal
2700K
2725
3000K 3500K 4100K 5000K 6500K
3000K nominal
2700K
3045
3000K 3500K 4100K 5000K 6500
K
3500K nominal
2700K
3465
3000K 3500K 4100K 5000K 6500
K
4000K nominal
2700K
3985
3000K 3500K 4100K 5000K 6500
K
2700K nominal
2700K
2725
3000K 3500K 4100K 5000K 6500
K
3000K nominal
2700K
3045
3000K 3500K 4100K 5000K 6500K
3500K nominal
2700K
3465
3000K 3500K 4100K 5000K 6500
K
4000K nominal
2700K
3985
3000K 3500K 4100K 5000K 6500
K
2700K nominal
2700K
2725
3000K 3500K 4100K 5000K 6500
K
3000K nominal
2700K
3045
3000K 3500K 4100K 5000K 6500
K
3500K nominal
2700K
3465
3000K 3500K 4100K 5000K 6500K
4000K nominal
2700K
3985
3000K 3500K 4100K 5000K 6500
K