Technical Specifications

ManualsBrandsHalo ManualsLighting4 in. White Integrated LED Recessed Trim Downlight 80 CRI 3000K CCT with Junction Box

ADV142257

10/07/2015

Catalog #

Project

Comments

Prepared by

Type

Date

HALO

SPECIFICATION FEATURES

DESCRIPTION

The Halo Surface LED Downlight (SLD) incorporates WaveStream™

technology to create an ultra-low profile surface mounting luminaire with

the performance and look of a traditional downlight. SLD4 is designed

for installation in many 3-1/2” and 4” round or octagon junction boxes.

May also retrofit in 4” aperture IC and Non-IC recessed housings*.

Dedicated LED wiring connector meets high-efficacy code requirement

in recessed downlighting. Suitable for residential or commercial

installations. Ideal for closets, storage areas, attics and basements.

Compliant with NFPA

70, NEC

Section 410.16 (A)(3) and 410.16 (C)(5).

CONSTRUCTION

• Die cast aluminum trim ring and

die formed aluminum frame

OPTICS

• WaveStream™ technology

provides uniform luminance

from a low profile flat lens

• AccuAim™ optics provide

directional control for the

“cone-of-light” beam distribution

of a traditional downlight

• Precision molded lens features

high transmission polymer with

UV stabilized protecting film

DESIGNER TRIMS

Accessories (sold separately)

SLD designer trims are accessory

rings that attach to the SLD for a

permanent finish. Refer to SLD

accessories specification sheet for

details.

•

White (P

aintable)

• Satin Nickel

•

uscan Bronze

ELECTRICAL JUNCTION BOX

MOUNTING

• SLD may be used in compatible

electrical junction boxes in direct

contact with insulation including

spray foam insulation

• Suitable for installation in many

3-1/2” and 4” octagon and round

electrical junction boxes.

Note: Driver consumes 3 cubic

inches of junction box.

• Surface mounting in a fire-rated

ceiling using an appropriate

electrical box offers a cost-effective

alternative to fire-rated recessed

housings

Note: Fire-rating is per the rating

of the ceiling and applicable

junction box, not the SLD.

• Installer must ensure

compatibility of fit, wiring and

proper mounting in the

electrical junction box. This

includes all applicable national and

local electrical and building codes.

• Proprietary Slot-N-Lock quick

installation system for junction

box installation

• T-bracket with Slot-N-Lock

mounting tabs included.

RECESSED HOUSING

MOUNTING

Friction Blade

• Pre-installed precision formed

friction blades included

• Friction blade design allows the

SLD to be installed in any position

within the housing aperture (360

degrees)

* Note: Not for use in recessed

housings in direct contact with

spray foam insulation refer to

NEMA LSD 57-2013

LED

• Trilateral linear LED assembly is

integrated in trim perimeter.

• Color Temperature: 2700K, 3000K,

3500K, 4000K

• CRI options: 80 and 90

90 CRI can be used for

California Title 24 compliance/

cer

tified to Title 20

- 80 CRI can be used to comply

with California

Title 24 Non-

Residential Lighting Controls

as a LED luminaire.

• L70 at 50,000 hours projected

in accordance with TM-21

WARRANTY

Cooper Lighting provides a five

year limited warranty on the SLD

LED

LED CHROMATICITY

• A tight chromaticity specification

ensures LED color uniformity,

sustainable Color Rendering

Index (CRI) and Correlated

Color Temperature (CCT) over

the useful life of the LED

• LED chromaticity of 3 SDCM

exceeds ENERGY STAR

color

standards per ANSI C78.377-2008

• 90 CRI model features high color

performance with R9 greater than

• Every Halo LED is quality tested,

measured, and serialized in a

permanent record to register

lumens, wattage, CRI and CCT.

• Halo LED serialized testing and

measurement ensures color

and lumen consistency on a

per-unit basis, and validates

long-term product consistency

over time

ELECTRICAL CONNECTIONS

Junction Box

• Compatible with many 3-1/2”

x 2” and 4” x 1-1/2” round and

octagon boxes (2-1/8” deep boxes

recommended)

• Supply Wire Adapter with LED

quick connector included

Recessed Housings

• LED connector is compatible with

Halo 4” H995 Series LED Housings.

• LED Connector meets California

Title-24 high-efficacy luminaire

standard as a non-screw base

• The included E26 Edison

screw-base adapter provides

capability for retrofit.

• LED connector is a non-screwbase

luminaire disconnect for tool-less

installation

2700K

nominal

CRI

2700K

3500K

4000K

3000K

CRI

2700K

3500K

4000K

3000K

3500K

nominal

CRI

2700K

3500K

4000K

3000K

4000K

nominal

CRI

2700K

3500K

4000K

3000K

2700K

nominal

CRI

2700K

3500K

4000K

3000K

3500K

nominal

CRI

2700K

3500K

4000K

3000K

4000K

nominal

CRI

2700K

3500K

4000K

3000K

nominal CCT

CRI

2700K

3500K

4000K

3000K

nominal CCT

2700K

nominal

CRI

2700K

3500K

4000K

3000K

CRI

2700K

3500K

4000K

3000K

3500K

nominal

CRI

2700K

3500K

4000K

3000K

4000K

nominal

CRI

2700K

3500K

4000K

3000K

2700K

nominal

CRI

2700K

3500K

4000K

3000K

3500K

nominal

CRI

2700K

3500K

4000K

3000K

4000K

nominal

CRI

2700K

3500K

4000K

3000K

nominal CCT

CRI

2700K

3500K

4000K

3000K

nominal CCT

Refer to ENERGY STAR

Certified Products List.

Can be used to comply with California Title 24 High Efficacy requirements.

Certified to California Title 20 Appliance Efficiency Database.

Refer to ENERGY STAR

Certified Products List.

Can be used to comply with California Title 24 Non-Residential

Lighting Controls requirements as a LED Luminaire.

90CRI

LED

80CRI

LED

Refer to ENERGY STAR

Certified Products List.

Can be used to comply with California Title 24 High Efficacy requirements.

Certified to California Title 20 Appliance Efficiency Database.

Refer to ENERGY STAR

Certified Products List.

Can be used to comply with California Title 24 Non-Residential

Lighting Controls requirements as a LED Luminaire.

90CRI

LED

80CRI

LED

SLD4058xxWH

80CRI

2700K, 3000K, 3500K,

and 4000K

SLD4059xxWH

90CRI

2700K, 3000K, 3500K,

and 4000K

4” Surface LED

Downlight

Suitable for

ceiling or wall

electrical junction boxes

Suitable for

4” recessed

housing retrofit

(IC, Non-IC & AIR-TITE™)

ENERGY DATA

80 CRI 90 CRI

Lumens

(4000K models)

800 710

Input Voltage 120V 120V

Frequency 50/60 Hz 50/60 Hz

Input Current 0.10 A 0.10 A

Input Power 12.2 W 12 W

Efficiency

(4000K models)

66 lm/W 59 lm/W

THD ≤ 20%

Power Factor ≥ 0.90

T Ambient -30 - +40°C

Sound Rating Class A

NOMENCLATURE

SLD405830 WH

405

= 4” SLD

8 = >80 CRI

= 30

00K

WH = Matte White

Summary of content (4 pages)

PAGE 1
HALO DESCRIPTION Type Catalog # The Halo Surface LED Downlight (SLD) incorporates WaveStream™ technology to create an ultra-low profile surface mounting luminaire with the performance and look of a traditional downlight. SLD4 is designed for installation in many 3-1/2” and 4” round or octagon junction boxes. May also retrofit in 4” aperture IC and Non-IC recessed housings*. Dedicated LED wiring connector meets high-efficacy code requirement in recessed downlighting.
PAGE 2
HALO SLD4058xxWH SLD4059xxWH COMPLIANCE • cULus Listed ceiling and wall • cULus Damp Location listed ceiling and wall • cULus Wet Location Listed, ceiling only (shower rated) • Suitable for use in closets, compliant with NFPA® 70, NEC® Section 410.16 (A)(3) and 410.
PAGE 3
HALO SLD4058xxWH SLD4059xxWH HOUSING COMPATIBILITY The SLD4 is UL Listed in Halo and All-Pro recessed housings, and is UL Classified for use with any 4 inch diameter recessed housing constructed of steel or aluminum with an internal volume that exceeds 62.
PAGE 4
HALO SLD4058xxWH SLD4059xxWH PRODUCT DATA Cat No. CRI CCT Lumens Power (W) LPW SLD405827WH 81 2700 720 12.2 59 SLD405830WH 81 3000 750 12.2 61 SLD405835WH 81 3500 780 12.2 64 SLD405840WH 81 4000 800 12.2 66 SLD405927WH 92 2700 650 12 54 SLD405930WH 92 3000 670 12 56 SLD405935WH 92 3500 690 12 58 SLD405940WH 92 4000 710 12 59 Performance values are presented as typical for the model(s) indicated. Field results may vary.