Dimensions Guide
SLD 600 Series
SLD6068xxWH
80CRI
2700K, 3000K, 3500K,
and 4000K
SLD6069xxWH
90CRI
2700K, 3000K, 3500K,
and 4000K
6” Surface LED
Downlight
Suitable for
ceiling or wall
electrical junction boxes
Suitable for
5” & 6” recessed
housing retrofit
(IC, Non-IC & AIR-TITE™)
LED DRIVER
• Driver is a 120V input, high
efficiency, dimmable electronic
power supply providing DC
power to the LED array
• Driver features high power
factor, low THD, and has integral
thermal protection in the event
of over temperature or internal
failure
• Driver is replaceable if it should
be required
DIMMING
• Designed for continuous dimming
capability to nominally 5% with
many 120V Leading Edge (LE)
and Trailing Edge (TE) phase
control dimmers. Dimming to 5%
is best assured using dimmers
with low end trim adjustment.
Consult dimmer manufacturer for
compatibility and conditions of
use. (Note some dimmers require
a neutral in the wallbox.)
COMPLIANCE
• cULus Listed ceiling and wall
• cULus Damp Location listed
ceiling and wall
• cULus Wet Location Listed, ceiling
only (shower rated)
• Suitable for use in closets,
compliant with NFPA® 70, NEC®
Section 410.16 (A)(3) and 410.16
(C)(5)
• SLD may be used in compatible
electrical junction boxes in direct
contact with insulation including
spray foam insulation
• May be installed in IC recessed
housings in direct contact with
insulation (Not for use in recessed
housings in direct contact with
spray foam insulation. Refer to
NEMA LSD 57-2013)
• UL Classified when used in
retrofit with listed housings
(See Housing Compatibility)
• EMI/RFI: meets FCC 47CFR Part 15
Class B limits, and is suitable for
use in residential and commercial
installations
• Airtight certified per ASTM E283
(not exceeding 2.0 CFM under 57
Pascals pressure difference)
• 90 CRI: Can be used to comply
with California Title 24 High
Efficacy requirements. Certified
to California Title 20 Appliance
Efficiency Database.
• 80 CRI: Can be used to comply
with California Title 24 Non-
Residential Lighting Controls
requirements as a LED luminaire.
• Can be used for International
Energy Conservation Code (IECC)
and Washington State Energy
Code high efficiency luminaire
compliance
• ENERGY STAR® certified
luminaire - consult ENERGY
STAR® Certified Product List
• Contains no mercury or lead and
RoHS compliant.
• Photometric testing in accordance
with IES LM-79
• Lumen maintenance projections
in accordance with IES LM-80 and
TM-21
DIMENSIONS
ORDERING INFORMATION
SAMPLE NUMBER: SLD606927WH SLD6TRMSN
Junction Box Installation: Order junction box separately, as supplied by others, to complete installation.
Recessed Installation: Order Halo recessed housing separately to complete installation.
Models Color Rendering Index Color Temperature (CCT) Finish Accessories
SLD606= 6” Surface LED Downlight, 120V
600 Series
8=80 CRI
9=90 CRI
27=2700K
30=3000K
35=3500K
40=4000K
WH=White
Designer Trims
Fit over the SLD for a designer nish
SLD6TRMSN=6” SLD Satin Nickel
SLD6TRMTBZ=6” SLD Tuscan Bronze
SLD6TRMWH=6” SLD White (paintable)
J-Box Spacer Extension Ring
Add 15/16” depth when SLD driver cannot t into installed junction
box
SLD6EXT=6” Surface LED J-Box Extender, 9.5” O.D.
RAD Adapters
When junction box is mounted at on a ceiling or beam surface
(not recessed in ceiling)
SLD6RAD=6” SLD Round Surface J-Box Adapter, 7.92” O.D.
(for 4-inch round or octagon junction boxes.)
SLD6SADPLT=6” SLD Square Surface J-Box Adapter Plate
(For 4-inch square junction boxes, use with SLD6RAD.)
Spare Parts
SLD6ACCKIT=6” Accessory Parts Replacement Kit
(Screwbase adapter, torsion springs, friction blades)
SLD6BRKT=6” Junction Box Bracket & Screws
Refer to SLD Accessories specication sheet for further information.
SLD6068xxWH
SLD6069xxWH
7.79”
[197.87mm]
.7”
[17.28mm]
.8”
[21.46mm]
7.79”
[197.87mm]