Specification Sheet

SMD6 Series
HALO
HOUSING COMPATIBILITY
The SMD6 is UL Certified in Halo recessed housings and for use with any 5 or 6 inch diameter recessed housing constructed of steel or aluminum with an internal volume that
exceeds 107.9 in3 in addition to those noted below. Note: Some other’s housings require installation with included friction clips.
Compatible Halo LED Housings with LED luminaire connector
(high-efficacy compliant)
HALO
LED
Recessed
Can Size
Catalog Number
5"
H550ICAT, H550RICAT, E550ICAT,
E550RICAT
6"
H750ICAT, H750RICAT, H750T,
H750RINTD010, H750TCP, H2750ICAT,
H2750RICAT, E750ICAT, E750RICAT
Halo LED Retrofit Enclosures
HALO 6"
ML7BXRFK, ML7E26RFK
Compatible Halo Incandescent E26 Screwbase Housings
HALO
5"
H5ICAT, H5RICAT, H5ICATNB, H5T,
H5RT, H25ICAT, H25ICATNB, E5TAT,
E5RTAT, H5TNB, E5TATNB, E5ICAT,
E5RICAT, E5ICATNB
6"
H7ICAT, H7RICAT, H7ICT, H7RICT,
H7ICATNB, H7ICTNB, H7T,
H7RT, H7TNB, H7TCP, H7UICT,
H7UICAT, H27ICAT, H27RICAT,
H27T, H27RT, E7ICAT, E7RICAT,
E27ICAT, E27RICAT, E7ICATNB,
E7TAT, E7RTAT, E7TATNB, E27TAT,
E27RTAT
4" square deep steel box
4" x 4" x 2-1/8"
(102mm x 102mm x 54mm)
COMPATIBLE WITH MANY OTHER JUNCTION BOXES*
COMPATIBLE WITH EATON’S CROUSE-HINDS JUNCTION BOXES
4" octagon light fixture/fan steel box
4" x 4" x 2-1/8"
(102mm x 102mm x 54mm)
• TP316 - for non-metallic cable
• TP317 - for metal clad cable
• UL Listed
• Suitable for two-hour fire-rated ANSI/UL 263 when properly installed
in a fire-rated ceiling or wall
• Refer to www.crouse-hinds.com
TP316
for non-metallic cable
4” x 4” x 2-1/8”
(102mm x 102mm x 54mm)
TP317
for metal clad cable
4” x 4” x 2-1/8”
(102mm x 102mm x 54mm)
4" square standard steel box
4" x 4" x 1-1/2"
(102mm x 102mm x 38mm)
4" octagon steel box
4" x 4" x 1-1/2"
(102mm x 102mm x 38mm)
3-1/2" round old work
non-metallic box
4-1/4" O.D. flange, 3-1/2" I.D. x 2-5/8”
(108mm O.D., 89mm I.D. x 67mm)
4" round new work non-metallic
light fixture/fan box
4" diameter x 2-3/16"
(102mm x 56mm)
3-1/2" round new work
non-metallic ceiling box
3-1/2" diameter x 2-3/4"
(89mm x 70mm)
4” round surface mount box
4" diameter x 1-1/2”
(102mm x 38mm)
Requires SLD6RAD adapter
*This is a representative list of compatible junction boxes only. Information
contained in this literature about other manufacturers’ products is
from published information made available by the manufacturer and is
deemed to be reliable, but has not been verified. Eaton makes no specific
recommendation on product selection and there are no warranties of
performance or compatibility implied. Installer must determine that site
conditions are suitable to allow proper installation of the mounting bracket
in the box.
4" round new work non-metallic box
with hanger bar assembly
4" diameter x 2-3/16" (102mm x 56mm)
Surface mounting in a fire-rated ceiling using an appropriate electrical
box offers a cost-effective alternative to fire-rated recessed housings.
Note: Fire-rating is per the rating of the ceiling and applicable junction
box, not the SMD.