Specification

TD518248EN
3/13/2017
Catalog #
Project
Comments
Prepared by
Type
Date
HALO
SPECIFICATION FEATURES
DESCRIPTION
The Halo Surface Mount LED Downlight (SMD) is an ultra-low profile
surface mounting luminaire with a modern look and high performance.
SMD6-DM (6” with spring clips) is designed for new installation into
drywall, without any additional housing or junction box needed. Suitable
for residential or commercial installations. Ideal for general areas, closets,
storage areas, attics and basements.
HOUSING
• Non-electrically conductive
polycarbonate frame.
• High impact diffuse polystyrene
lens provides shielding to the
light guide with no pixilation
• Stamped aluminum housing
provides thermal cooling
achieving L70 at 50,000 hours in
IC and non-IC applications
GASKETS
• Closed cell gasket achieves
restrictive airflow and wet
location requirements without
additional caulking
OPTICS
• Precision acrylic light guide
organizes source flux into wide
distribution with 1.2 – 1.4 spacing
criteria useful for general area
illumination
LED
• Mid power led array provide
a uniform source with high
efficiency and long life.
• Available in 90 CRI minimum,
R9 greater than 50 and color
accuracy within 3 SDCM provide
color accuracy and uniformity
DRIVER
• Integral 120V 50/60Hz constant
current driver provides noise free
operation.
• Continuous, flicker-free dimming
from 100% to 5% with select
leading or trailing edge 120V
phase cut dimmers.
• Dimming to 5% is best assured
using dimmers with low end
trim adjustment. Consult dimmer
manufacturer for compatibility
and conditions of use. (Note
some dimmers require a neutral
in the wallbox.)
• Inline electrical quick connect
(provided) provides mains
connections.
MOUNTING/RETENTION
• The SMD-DM with Spring Clips
requires no housing or junction
box.
• The integral enclosure may
be used in direct contact with
insulation including spray foam
insulation.
• Installer must cut template
out of drywall, and install into
the aperture with the clips
compressed.
• When released, the spring clips
will rest on to the back side of the
drywall.
• Installer must ensure secure
fit and wiring. This includes all
applicable national and local
electrical and building codes
COMPLIANCE
• cULus listed / certified for use
with Halo housings, classified for
use with other’s housings, see
instruction sheet for conditions of
acceptability.
• Wet and Damp Location listed,
airtight per ASTM-E283
• Suitable for use in clothes closets
when installed in accordance
with the NEC 410.16 spacing
requirements.
• EMI/RFI emissions per FCC 47CFR
Part 15B
• Contains no mercury or lead and
RoHS compliant.
• Photometric testing in accordance
with IES LM-79-08
• Lumen maintenance projections
in accordance with IES LM-80-08
and TM-21-11.
• Can be used for State of
California Title 24 high efficacy
luminaire compliance, reference
the California Energy Commission
Title 20 Appliance Efficiency
Database for current listings.
• Can be used for International
Energy Conservation Coe (IECC)
and Washington State Energy
Code high efficiency luminaire
compliance
WARRANTY
• Five year limited warranty,
consult website for details.
www.eaton.com/lighting/legal
SMD6-DM Series
6 Inch Round and Square
Direct Mount
SMD6R-DM
SMD6S-DM
6” Surface Mount
Downlight
Direct Mount into
non-accessable ceiling
ENERGY DATA
Round Square
Lumens
(5000K models)
788 815
Input Power 9.62 W 9.9 W
Input Current 0.0811 A 0.085 A
Efficiency 82 lm/W 82 lm/W
THD
13.9 14.7
Input Voltage
120V
Frequency 50/60 Hz
CRI 90 CRI
Power Factor 0.99
T Ambient -30 - +40°C
Sound Rating Class A
Refer to ENERGY STAR® Qualified Products List.
Can be used to comply with California Title 24 High Efficacy requirements.
Certified to California Appliance Efficiency Database under JA8.
ORDERING INFORMATION
SAMPLE NUMBER: SMD6R6930WHDM=6” Round Surface Mount Downlight, 90CRI, 3000K, Direct Mount
Models Lumens CRI / CCT Finish Mouting
SMD6R= 6” Round Surface Mount
Downlight, 120V
SMD6S= 6” Square Surface Mount
Downlight, 120V
6=600 lumen series 927=90CRI, 2700K
930=90CRI, 3000K
935=90CRI, 3500K
940=90CRI, 4000K
950=90CRI, 5000K
WH=White DM=Direct Mount
DIMENSIONS
SMD6RXXXWHDM
SMD6SXXXWHDM
1/4"
[6.8mm]
2"
[51mm]
7-1/2"
[190.58mm]
1/4"
[6.8mm]
2"
[51mm]
7-3/8"
[188.1mm]
8-1/2"
[216mm]
8-1/2"
[216mm]
SMD6RXXXWHDM
SMD6SXXXWHDM
1/4"
[6.8mm]
2"
[51mm]
7-1/2"
[190.58mm]
1/4"
[6.8mm]
2"
[51mm]
7-3/8"
[188.1mm]
8-1/2"
[216mm]
8-1/2"
[216mm]
SMD6RXXXWHDM SMD6SXXXWHDM
1/4"
[6.8mm]
2"
[51mm]
7-1/2"
[190.58mm]
1/4"
[6.8mm]
2"
[51mm]
7-3/8"
[188.1mm]
8-1/2"
[216mm]
8-1/2"
[216mm]
SMD6RXXXWHDM SMD6SXXXWHDM
1/4"
[6.8mm]
2"
[51mm]
7-1/2"
[190.58mm]
1/4"
[6.8mm]
2"
[51mm]
7-3/8"
[188.1mm]
8-1/2"
[216mm]
8-1/2"
[216mm]