Spec Sheet

26"
660mm
6"
153mm
7"
178mm
28 3/4"
730mm
8"
203mm
1/4"
6mm
19 1/8"
486mm
2 7/8"
73mm
A
B
27"
686mm
33 3/8"
846mm
34 11/16"
882mm
1-1/4"
DRAIN
O 1/2" (4)
13mm
10"
254mm
*
FINISHED FLOOR
halseytaylor.com
HALSEY TAYLOR, 2222 Camden Court, Oak Brook, IL 60523
Printed in the U.S.A.
®
Page 2
A = 3/8” O.D. UNPLATED COPPER TUBE CONNECT
SHUT OFF VALVE BY OTHERS
B = REMOVABLE BOTTOM COVER
Endura II™Outdoor Tubular
Wall Mount Fountain
MODEL 4405
OPERATING PRESSURES:
Supply water 20 – 105 psi maximum
TOP VIEW
SIDE & FRONT VIEWS
* ADA Requirement
BACK VIEW
MOUNTING INSTRUCTIONS and
PLUMBING CONNECTIONS
Refer to diagrams for plumbing rough-in. This fountain is to be mounted on
a smooth, at nished wall surface with adequate support.
Note: Wall mounting structure must be capable of supporting a 300 lb.
load minimum on fountain. To secure unit, use 3/8” minimum fasteners
(not provided). Water service line and waste line are to be assembled as
required. Final check for leaks and correct functions of fountain should be
made. (For details see the installation instructions.)
Installation requires trap to be installed in wall. A service supply stop
must be installed at the fountain inlet line. Trap and service stop not
included.
Caution – Fountain must be securely bolted to wall.
NOTE: For wall support required locations see installation instructions
provided with fountain.