Specification Sheet

GENERAL
Self-contained, electric refrigerated wall-mounted
water cooler designed to be easily accessible
to physically challenged individuals. When
properly installed, unit meets state and federal
requirements as defined by the Americans with
Disabilities Act. Unit is certified to NSF/ANSI 61
and 372 and meets requirements of the Safe
Drinking Water Act. Unit provides 50° F water
at 80° F inlet water and 90° F ambient.
CABINET
Heavy-gauge vinyl clad steel. Resistant to wear,
moisture, perspiration, heat, and sunlight.
Optional Stainless Steel is available.
COOLER TOP
Type 300 series stainless steel cooler top,
with satin finish resists stains. Anti-splash
ridge reduces splatter. Contoured to insure
proper drainage.
BUBBLER
Exclusive one-piece, chrome-plated two-stream
mound-building bubbler with non-removable
anti-squirt feature and integral hood insures a
satisfying drink of water.
PUSH BAR ACTUATION MECHANISM
Self-closing light-touch push bars with raised
letters for the visually impaired.
AUTOMATIC STREAM HEIGHT REGULATOR
Self-closing assembly is located inside unit to
prevent tampering. Unit resists corrosion and
liming. A constant stream height is automatically
maintained under line pressures that vary from
20 to 105 psi.
INLET STRAINER
Easily cleaned in-line strainer screen traps
particles of 140 microns or larger before they
enter the waterway.
TEMPERATURE CONTROL
Positive sensing thermostat for controlling
temperature of storage tank water. Factory set
at 50° F Adjustable ± 5° F.
COOLING COIL
Tube-type.
Non-pressurized copper water
cooling coil. Waterways are certified to
NSF/ANSI 61 and 372, far exceeding the
requirements of the Safe Drinking Water
Act.
REFRIGERATION SYSTEM
Hermetically sealed, positive start compressor
with lifetime lubrication and built-in overload
capacity dryer-strainer, and self-lubricated fan
cools copper/aluminum condenser. System
uses R134A refrigerant. Protected by Halsey
Taylor’s Limited 5 Year Warranty.
VENTILATION
Insure proper ventilation by maintaining
6" (152mm) minimum clearance from
cabinet louvers to wall.
SUGGESTED SPECIFICATIONS
Shall deliver 8.0 GPH of 50° F water at 90° F
ambient and 80° F inlet water. Shall have
stainless steel basin with removable drain
strainer. Bubbler shall be two-stream mound
building type. Separate valve and automatic
stream regulator shall be mounted within
cabinet. Refrigeration system shall employ high
t compressor using
R134A, non-pressurized tank with totally ressurize
encapsulated insulation and be controlled by
positive sensing thermostat. Shall have front
(or front and side) push-bar water controls with
raised lettering for the visually impaired. Cooler
shall comply with ANSI 117:1 and ADA for
visual and motion disabilities. The manufacturer
shall certify the unit to meet the requirements
of NSF/ANSI 61 and 372 and the Safe Drinking Water Act.
Unit complies with ARI Standard 1010.
NOTE: Continued product improvement makes
specifications subject to change without
notice. See Halsey Taylor website for most
current spec sheet.
Standard finish is Platinum Vinyl
Optional Vinyl Finishes Available (no extra cost)
Slate
Almond
Optional Finishes (extra cost)
All Stainless Steel
Optional Accessories (extra cost)
Water Filter
Vandal-Resistant Kit
Easy-Flex
™
Bubbler
HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523
A30 / 10-20
13
MODEL:
■■
WC8AFS-Q
■■
WCFS-L/R (Less Refrigeration)
Barrier-Free Cooler
halseytaylor.com
WC8 BARRIER-FREE SERIES
Model GPH Capacity Base F.L. Shipping Rated
No. Cooled to 50° F* Rate Amps Weight Watt
Ambient Air Temp
Cap. lb. Usage
70°F 80°F 90°F
†
100°F
WC8AFS-Q 9.2 8.4 7.6 6.8 7.6 4.0 70 370
* With projector service and tap water at 80° F
†
UL listed and complies with ARI Standard 1010
Trap and service stop not included
JOB NAME:
ENGINEER/CONTRACTOR NAME:
APPROVAL:
DATE: