Specification Sheet

This water cooler is certified to
NSF/ANSI 61-Annex G, AB 1953.
GENERAL
GreenSpec
®
Listed, modular, electric refrigerat-
ed, bi-level wall-mounted water cooler designed
to be easily accessible to physically challenged
and able-bodied individuals. When properly
installed, unit meets state and federal require-
ments as defined by the Americans with
Disabilities Act. Unit is certified to NSF/ANSI 61
and meets requirements of the Safe Drinking
Water Act. Unit provides 50° F water at 80° F
inlet water and 90° F ambient.
FOUNTAIN
Oval shape fountain, non-corrosive stainless
steel, with brushed satin finish. Contour-formed
basin with rounded corners and edges. Oval
fountain shape requires less neck extension and
bending for the wheel chair user.
WATER CONSERVATION BUBBLER
Designed to reduce water usage while still
delivering a satisfying stream. Vandal-resistant
bubbler is one-piece, chrome-plated, with
integral hood guard design to prevent
contamination from other users, airborne
deposits and tampering.
AUTOMATIC STREAM HEIGHT REGULATOR
Self-closing assembly is located inside unit to
prevent tampering. Unit resists corrosion and
liming. A constant stream height is automatically
maintained under line pressures that vary from
20 to 105 psi.
PUSHBAR ACTUATION MECHANISM
Self-closing, semi-circular push bar can be
actuated at any point on its 180° radius.
INLET STRAINER
Easily cleaned in-line strainer screen traps
particles of 140 microns or larger before they
enter the waterway.
REFRIGERATION SYSTEM
High-Efficiency, hermetically sealed, positive
start compressor with lifetime lubrication and
built-in overload protection, efficient capillary
sizing, large capacity dryer-strainer, and self-
lubricated fan cools copper/aluminum
condenser. System uses R134A refrigerant.
Protected by Halsey Taylor’s Limited 5 Year
Warranty.
MOUNTING FRAME
Mounting frame is manufactured of corrosion
resistant, galvanized steel. Open construction
designed for ease of installation. Mounting
frame can be shipped in advance for rough-in
installation.
PANELS
Constructed of stainless steel number 300
series with satin finish. Removable lower panel
provides access to plumbing and refrigeration
system. Panels overlap wall opening
1
/
2"
.
SUGGESTED SPECIFICATIONS
Shall be GreenSpec
®
Listed. Shall deliver 7.5
GPH of 50° F water at 90° F ambient and 80° F
inlet water. Fountain shall include pushbar
valve on front, contour-formed basin to
eliminate splashing and standing water, and
rounded corners and edges.Bubbler shall be
one-piece, lower-flow, vandal-resistant.
Cooling unit shall have a high efficiency
positive start compressor using R134A, with
pressurized counterflow cooling evaporator/
chiller. Cooler shall comply with ANSI 117:1
and ADA for visual and motion disabilities. The
manufacturer shall certify the unit to meet the
requirements of NSF/ANSI 61-Annex G, AB
1953 , and the Safe Drinking Water Act. Unit
complies with ARI Standard 1010.
NOTE: Continued product improvement
makes specifications subject to change
without notice. See Halsey Taylor website
for most current spec sheet.
Standard finish is Stainless Steel
Optional Accessories (extra cost)
■
Water Filter
■
Cane Apron
Each OVL-II
™
SER-GRN-VR consists of
3 cartons as follows:
Mounting Frame
Cooling Unit-SJ8GRN
Fountain, Panels & Misc. Parts
HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523
A38 / 7-2010
MODEL OVL-II
™
SER-GRN-VR
Barrier-Free Cooler
GreenSpec
®
Listed,
High Efficiency OVL-II
™
Series Bi-Level
halseytaylor.com
OVL-II
™
BARRIER-FREE SERIES
Model GPH Capacity Base F.L. Shipping Rated
No. Cooled to 50° F* Rate Amps Weight Watt
Ambient Air Temp
Cap. lb. Usage
70°F 80°F 90°F
†
100°F
OVL-II
™
SER-Q 9.3 8.3 7.5 6.8 7.5 2.8 135 260
* With projector service and tap water at 80° F
For additional specification of the cooling unit, see specification sheet for Model SJ8 Remote in this catalog.
†
UL listed and complies with ARI Standard 1010
Trap and service stop not included
JOB NAME:
ENGINEER/CONTRACTOR NAME:
APPROVAL:
DATE: